Newest (and final for a while) setup.. nothing blingy like my old setup but I do get better temps over my previous WC (BIP III/MP-05 Pro/Maze4/50z/MCRes).
E6300 L629A Lapped @ 3.5, 1.5v Real (1.55v BIOS)
P5B Deluxe WiFi/AP BIOS 0614
G.Skill 2GBGA @ 500MHz, 4-4-4-8, 2.25v
X1900GT Rev 1 @ 600/720 (CCC Overdrive) w/Accelero X2
SB X-Fi XtremeMusic
MCR220/2x Yates/MCW6000 (doubled up tube about 1" into long piece to fit snug over 3/8")/Hydor L30 II/Masterkleer 7/16"
Last edited by NickS; 03-24-2007 at 06:28 PM.
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
Awwwww bling is all gone!Originally Posted by NickS
Newest (and final for a while) setup.. nothing blingy like my old setup but I do get better temps over my previous WC (BIP III/MP-05 Pro/Maze4/50z/MCRes).
E6300 L629A Lapped @ 3.5, 1.5v Real (1.55v BIOS)
P5B Deluxe WiFi/AP BIOS 0614
G.Skill 2GBGA @ 500MHz, 4-4-4-8, 2.25v
X1900GT Rev 1 @ 600/720 (CCC Overdrive) w/Accelero X2
SB X-Fi XtremeMusic
MCR220/2x Yates/MCW6000 (doubled up tube about 1" into long piece to fit snug over 3/8")/Hydor L30 II/Masterkleer 7/16"
Lenovo Thinkpad X220 - Core i5 2410m, 4gb
waiting on 28nm video cards...
Old rig....
New rig...
Last edited by masaville; 03-25-2007 at 12:02 PM.
E6700 | eVGA 680i MB | 4GB OCZ Spec Ops DDR2-800 | Raptor 74GB + 150GB | eVGA 8800 GTX SLI | TJ07 | OCZ 1000w | HP LP3065 30" LCD
D-tek Fuzion | DD 8800 GTX GPU blocks | BIX GTX 480 & 240 Rad | 2 x Swiftech MCP655 Pump | 2 x EK-Res-200...all in one pimped out TJ07 case!
Project thread - http://www.xtremesystems.org/forums/...d.php?t=136408
This is my first post here so I'd like to show you my original German system. Except the CPU block everything is made in Germany.
This is a Danger Den TDX for S939. It cools very well and looks fantastic.
The fan controller - an Aquaero made by Aqua-Computer.
All fans are Yate Loon D12SL-12. Very cheap but silent
Northbridge block made by MIPS-Computer.
PSU is an Enermax Liberty, but I replaced the standard fan by a Yate Loon. Also there are two temperature sensors *g*.
The heatspreaders are Revoltec RAM Freezer Platinum. They are useless for better OC, but are very nice =).
GPU block is a Watercool Heatkiller GPU-X 2.5. The installation is horrbile, but it performs great by a low flow resistance. It also cools the MOSFETs.
----
The Case is a Lian Li PC7-SE in black. A nice case but very small for a watercooling system. So I mounted the pump, a Watercool Eheim 1046, and the reservoir on the cases back:
The radiator is external, pics will be shown soon.
Last edited by arctic_storm; 03-29-2007 at 03:01 AM.
My system@Nethands
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
Some Pics of my current set-up. With new E6600!
Let me know what you guys think of it.
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
Here the promised pictures:
Watercool HTSF Triple - performs very well with silent fans
Watercool Silenstar HD Single - here only on bitumen.
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
Could you tell me what this is, exactly? You can even try explaining it auf Deutsch, weil ich ein bisschen weiss.Looks to me like it is a valve that would allow flow when you apply pressure to both sides. Why you would need it is beyond me, though.
Last edited by PenumbralFigure; 04-03-2007 at 10:50 AM.
E6600 9.0 x 328.0 = 2.95
eVGA 680i
G.Skill 4x1GB 5-5-5-15
eVGA 8800GTX 576/900 (Work in progress)
Audigy2 ZS
Icemat Siberia
Scepter X20WG-1080P 20.1" widescreen LCD
Mine!
Last edited by m411b; 04-06-2007 at 06:10 AM.
Made a few more pics lately, guess i could post 2 of them here.
Both are clickable.
Specs: Intel Core i7 950 @ 4.2GHz with EK Supreme waterblock. Sapphire HD7970 @ 1125/1575 with EK waterblock. ASUS Sabertooth X58. 3x 2GB OCZ Reaper @ 1600MHz. 128GB Crucial M4. 2x 2TB WD Green. Corsair AX750. XSPC RX480 Radiator. Laing DCC-1T pump. 4x Scythe Gentle Typhoon 120mm @ 6 volt. 4x Sharkoon Silent Eagle 80mm @ 6 volt. Modified Lian-Li PC-71.
Just gorgeous. What is that thing with all the wiring? Is that for your lights?Many pictures are not up-to-date. They are from 2006 and but I want to show it:
I think the original DD TDX mounting looks terrible:
That's the way it has to be
Two more pics:
before
after
Last edited by arctic_storm; 05-16-2007 at 10:08 AM.
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
Right! It is an Aerocool Aero Engine II
But nothing is, as it was, when I bought it
The Box was created for separating the liquid-cooling-components from the Hardware.
Some worklog Pics:
Empty your mind. Be formless, shapeless. Like water. You put water into a bottle and it becomes the bottle. You put in a teapot, it becomes the teapot. Water can flow, or it can crash.
...be water my friend
Worklog - Lian Li PC 343b built with 2 Triple-Rad-Loops
Well Though it was time for a tune up of my system so heres what I did.
Before
Yea omg whats on that pump. Well as everyone knows the little DD pumps suck and mine cracked along the back. So it was time to change stuff.
After some time and cash
Parts are
Laing DDC-2 + Petra's top
BIX( Need to get thermochill like everyone )
Swifttech Apogee ( Getting a D-TEK FuZion love the mail system )
Swiftech MCW30 NB
Evercool VC-RE SB
Oh and a custom res I made in my spare time holds about 1L
Just running plain distilled water might get some Pentosin G11
Please tell me what can be improved.
LOL. I love your old pump. Looks like a WWII vet with the bandages.Well Though it was time for a tune up of my system so heres what I did.
Before
Yea omg whats on that pump. Well as everyone knows the little DD pumps suck and mine cracked along the back
After some time and cash
Parts are
Laing DDC-2 + Petra's top
BIX
Swifttech Apogee ( Getting a D-TEK FuZion love the mail system )
Swiftech MCW30 NB
Evercool VC-RE SB
Oh and a custom res I made in my spare time holds about 1L
Just running plain distilled water might get some Pentosin G11
Please tell me what can be improved.
MM Extended U2-UFO CYO (Duality front, Standard back, Horizontal Mobo brace) Anodized Black || eVGA X58 || Intel i7 920 || 6 GB Corsair Dominator PC3-12800|| eVGA 295GTX || Asus Xonar Essence STX || VisionTek 650 TV Tuner || 1 300GB WD Velociraptor || 1TB WD's Black Ed. || LG 22X DVD-Writer || Lite-On 20x DVD-Writer || Corsair CMPSU-1000HX PSU
CPU Loop: DDC-2 w/ XSPC Reservoir Top -> Swiftech GTZ -> Thermochill PA120.3 (Push: 3 Scythe S-Flex G)
GPU Loop: DDC-2 w/ XSPC Reservoir Top -> (Koolance VID-NX295 FC block) ->Thermochill PA120.3 (Push: 3 Scythe S-Flex G)
Chipset Loop: DDC-2 w/ XSPC Reservoir Top -> Alphacool Silentstar Dual HD waterblock enclosure -> Bitspower Black Freezer eVGA x58 MOSFET-> Bitspower Black Freezer eVGA x58 NB -> Thermochill PA120.2 (Pull: 2 Scythe S-Flex G)
2 x Dell 2408FPW LCD || Logitech Z-5500 Digital 5.1 || Logitech G9 Mouse || Logitech G15 LCD Keyboard || Logitech Quickcam Ultravision || Sennheiser Headphones
New home for radiator, pump, res and fan controller:
Made by LeChuck@Forumdeluxx:
http://forumdeluxx.de/forum/showthread.php?t=341917
On Saturday or Sunday I should be able to show the whole result
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
Modem user warning
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
*Yeah* Me and Been too! Not every german guy has little tubingHey! I'm German and I used 1/2 tube.
I like my thick tube
Hey Xion, if I were you... I couldn´t wait any longer for the EK R600 Extreme cooler
Empty your mind. Be formless, shapeless. Like water. You put water into a bottle and it becomes the bottle. You put in a teapot, it becomes the teapot. Water can flow, or it can crash.
...be water my friend
Worklog - Lian Li PC 343b built with 2 Triple-Rad-Loops
Thats a drain and it has a zip tie now.NaeKuh...dunno if you fixed this or not? But wanted to point it out to you...
and a suggestion if you ever break down loop and redo things:
The other definitely has a worm drive clamp on it.
I didnt take the final pics yet. I havent had time to work on it. I just went though a CPU exchange, and the next time i have free goes to rebuilding another quadcore.
I have 3 now, 1 going to be donated soon to my best friend.
So when i do have the time, and i get the plexiglass up, i'll repost.
As of right now, i dont care how it looks, only how much points it can crunch per day.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?*
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
Nice one Uncle David!
Just took some new pics
Last edited by peebee; 06-13-2007 at 01:48 AM.
Empty your mind. Be formless, shapeless. Like water. You put water into a bottle and it becomes the bottle. You put in a teapot, it becomes the teapot. Water can flow, or it can crash.
...be water my friend
Worklog - Lian Li PC 343b built with 2 Triple-Rad-Loops
I replaced my damn violet-light-producing CCFL by High Quality LED's.
So my non-uv-active components are not spotted with the bright violet note.
It is purer UV:
see a usual LED:
And the higher Quality with a lower nm-value:
Last edited by peebee; 06-15-2007 at 02:12 AM.
Empty your mind. Be formless, shapeless. Like water. You put water into a bottle and it becomes the bottle. You put in a teapot, it becomes the teapot. Water can flow, or it can crash.
...be water my friend
Worklog - Lian Li PC 343b built with 2 Triple-Rad-Loops
Where did you/are you getting the UV LED arrays from? I am looking for some and don't like the UV CFFL's because they put out too much "light" and not enough UV.I replaced my damn violet-light-producing CCFL by High Quality LED's.
So my non-uv-active components are not spotted with the bright violet note.
It is purer UV:
see a usual LED:
And the higher Quality with a lower nm-value:
CNC Waterblock Builder
Q9550, Rev. E0
Gigabyte EP45-UD3P
4GB G.Skill DDR2-1000
eVga GTX 260 Core 216 Superclocked
3 Western Digital 80GB, RAID 0; 500GB Seagate 7200.11
Silverstone OP750 PSU
Extreme Watercooling
Swiftech MCR-QP 360
D-Tek Fuzion v1
Laing D5
D-Tek Fuzion GFX rev. 2
New HDDs
Again the external case
I'm fourteen years old. So excuse my English and try to unterstand it as good as possible
Dude u rig make meh so horney . . .I love it long time . . .I had to add my precious to the gallery! My precioussssss...... :P She's a UFO Horizon that I worked on sporadically for a month or two until it was done. Definitely the best case out there!
Mountain Mods in Cerulean Blue . . . .
**Xfiles moment
DDC upside down = bad ?
Never heard of it, but I hope not. I turned it upside down because it fitted well in my not-so-spacious P180. If I turn it the other way around, I will lose 1 DVD or 1 HD..
The CPU block is a '1ACOOLING-HV2'. I bought it as part of the complete set. It's small, but I guess it is in the lower classes of performance. It is probably going to be replaced by a friends alphacool (nexxxos?) cpu block.
My new LanLI G70
Used a Thermochill 120.3 with ACRyan Grill. Fitted fine and also Yate DS12 fans and a nice GTX block and DDC Ultra Pump.
Posting Permissions
.JPG)
Bookmarks