Quote Originally Posted by ryanyeo View Post
Guys, below are my settings:
CPU Frequency: 306
DRAM Frequency: 912Mhz
Performance Mode: Standard
PCI Express Frequency: 100
PCI Clock Synchronization Mode: 33.33
Memory Voltage: 2.20V
CPU Vcore Voltage: 1.40V
FSB Termination: 1.4V
MCH Chipset Voltage: 1.55V
ICH Chipset Voltage: 1.20V
Timing: 4-4-4-12
Dram ECC Mode: Disabled
Hyper Path 3: Disabled
DRAM Throttling Threshold: Disabled

I would not like to overclock till extreme stage. My intention is to run my vCOre at around 3.00Ghz-3.20Ghz and memory at 900-1000Mhz. I tried many times, but failed to get to that stage. Anyone please help me.
I take it you have checked the meory with memtest86 to check it is okay. Disable memory spead in Jumper free and virtulisastion in CPU configuration if you havent done so. Your CPU will easy do 3.0-3.2 probably on stock volts and your memory should certainly do 1000. Try FSB 333 and Memory at 999with looser timmings of 5,5,5,15. You can use memset to tighten once booted if it will let you. If it wont boot try it with SPD enabled. I posted a couple of references a few days ago to other posts about 4:5 and 2:3 memory settings. You can have problems with TRD=6 but normally only with high FSB.