Testing / comparing : Intel D975XBX2 / Asus P5B DX ***56K WARNING***

[nealh]

Powerslobe is on yes everytime, as off now i am stable at 370fsb..

1,6V MCH
1,4V FSB
1,4V Core
2,2V On the mems, at the timings in my tag...

These settings aint testet for the lowest amount of volts i really need, just try'd em out so i could get back to a stable system...

I've try'd everything before, i maxed out both Vcore, Vmch and Vfsb, but the further i get to 400fsb the more unstable my bios gets and it freezes, and i have to fiddle with the jumper right away...

Ill get rid of Everest to...

so you have tested a vcore of 1.5v for example?

some have reported if you do not disconnect the power cord from the psu that the voltage changes do not take

Have you reflashed or flashed a newer bios by any chance

what I would try is go into the bios and enter the optimal defaults,reboot and enter the bios...then turn it off, unplug the power cord, hit the power button to discharge any power..replug it in and boot into the maintenance mode..turn off C1E/disable EIST

disable all items you are not using..onboard sound, floppy, VT tech etc

I would set vcore to 1.5v, powerslope on
mch 1.6
vfsb 1.4
vdmm 2.2v
set fsb to 400
266:533(ram will be at DDR800)

reboot and go from there(dont forget to reset the jumper and the initial boot may take a minute or so to post..sometimes that is so unnerving to me)

I am assuming that you memtested the memory at your seetings and they are OK?

boot OS..I would uninstall everest..turn off any AV/spyware and unplug internet for just testing purposes and see how things go