cyberspyder,
The Ultra 120 only comes with clips for 1 fan, I have multiple rigs using this cooler so I couls set this one up with clips but you can mount 2 120's using zip ties as shown in the attached photo. Just run one tie through the fans and cooler, use a second tie to lock it and cut everything but the end off of the locking zip tie.
Rig #1
DFI UTNF4 SLI Dr Expert (Bios 04/06)
AMD64 3500+ @2.8
G.Skill F1-4000B1U2 2GB (3-3-3-7 1T @2.7v)
2 Enermax Liberty 620w PSU's
Leadtek PX7800GT (2 SLI )
Rig #2
DFI LPUT NF590 SLI M2R/G
Amd64 X2-6000+
G.Skill F@-6400PHU2-2GBHZ (4-4-4-12)
Asus EN8800 GTX
Zippy 850w
nice tip,Originally Posted by Lancer33
I will try that with my ultra 120 extrem.
P5E Deluxe x38 @ Rampage Formula (Bios 0802) || E8600 @ 4500mhz @ 1,38v || Ultra 120 Extreme + 2 Yate Loon D12sl + IFX-10 || 2 GB Cellshock PC8500 D9GMH @ 600 (2.3v) 5/5/5/15/2T || 4 x 640gb WD sata II || HD4870 @ 775 - 1000 || CM Stacker STC-01 + 4 Yarte Loon D12SL || Enermax modu82+ 625W || Audigy2 ZS || Logitech Z-5500D || Lacie Electron22BlueIV 22"
New stuff in it, and fixed some of my wire management etc, new monitor etc etc.
I added a vantec PCI slot fan to blow some air up toward everything, the case is extremely cool now
Last edited by ChaosMinionX; 04-23-2007 at 09:53 PM.
what kinda temps are you getting with that ac cooler/ slot fan combo?
(i have the same card and was looking for a cheap backup air cooler)
I idle at 32C most all the time, with the slot cooler its down to 30C however the one reason I wanted it was to move the hot air it blows toward the mobo up and away into the 80mm so it stays cool in the case etc etc.
Works like a charm for how much it cost, would recommend it if you have a need to blow hot/cold air up from bottom of case due to video cards or HDDs etc.
That accelero never goes about 60C even with things like 3d06 maxed out.
Reply With Quote
Bookmarks