Ordered from Nerds.Net. Shipped from Memphis TN. 04-18-07 Batch #L644G465.
A rather average CPU with max OC somewhere between 3.0-3.2GHz with 1.5-1.6V.
I should of waited a bit to see what was shipping.
Ordered from Nerds.Net. Shipped from Memphis TN. 04-18-07 Batch #L644G465.
A rather average CPU with max OC somewhere between 3.0-3.2GHz with 1.5-1.6V.
I should of waited a bit to see what was shipping.
Last edited by WannaGoFast; 04-21-2007 at 09:03 AM.
P5K Deluxe - Bios 0404 - C2D Q6600G0 L723A930 SLACR - 3600MHz 400x9 1.45v - D-TEK FuZion CPU Waterblock
2GB Team Group Xtreem DDR2 800 - 500MHz 5-5-5-15 2t 2.2v - EVGA 8800GTS - Swiftech MCW60 GPU Waterblock
Laing DDC-2 w/Petra'sTech DDCT-01s Delrin Top - Swiftech MCR320-QP - Yate Loon D12SH-12 - Swiftech Res
PC P&C Silencer 750 - 2XWD Raptor 36.7GB (RAID0) - 36.7 GB Raptor(SATA) - LiteOn LH-20A1H-186 DVDRW
LIAN LI PC-G70B Black Aluminum Full Tower - 22" Samsung Syncmaster 226BW LCD - APC Back-UPS XS 1200
Ordered E6420 from shopblt, shipped from Tennessee and I got a L644G.
Last edited by babalouj; 04-21-2007 at 09:05 AM.
**Georgia Tech Grad, I am an Electrical Engineer with a specialization in RF IC design and Analog circuits.**
Intel I7 3770K Delidded
Gigabyte Z77X-UD5H
2x4gb Gskill 7-8-7-16
EVGA GTX680 Signature OC
Crucial M4 256gb
Seasonic X-750
Watercooling Loop: Raystorm Acetal, EK GTX580 Full Cover, MCR420, MCR320, MCP35X2 & 7 x AP-15 Gentle Typhoons
Heatware: gte460z
well my question maybe silly, but isnt this processor supposed to be called E6450, as I remember the new generation with 4mb is supposed to be 50 deries not 20 series
ordered my 6420 from ZZF last night for $199 not to shabby since everthing free ship there
What part of "Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn" don't you understand
Current Rig:
CPU: P4 2.6Ghz w/ HT @ stock
RAM: 1gig mushkin ddr-3200
MBD: Gigabyte 865p
Video: GeForce 128mb 6600GT
PSU: Enermax 420w
Sound: SB Audigy 2
HDD: 60gb ide and 160gb sata
yea so did i though free ship is 5-7 + processing it ends up taking forever 2 day shipping was only 1.99 more so i took it and got me a new cpu :POriginally Posted by PotGoblin
ordered my 6420 from ZZF last night for $199 not to shabby since everthing free ship there
seems like the 6420 runs cool but its a mixed bag when overclocking
we need a stepping/distributor graph for new potential buyers
i5 2500k @ 4.6ghz 1.335v [ASUS P8Z68 Deluxe]
8gb gskill ripjaws f3-12800cl8-8gbxm
600gb velociraptor + 1TB black
MSI N560GTX-TI Twin Frozr II + x-fi xtrememusic
corsair hx-620w + lian li pc201b + dell 2408fpw
d-tek fuzion1/ddc2 + petra top/thermochill pa120.3
when you get your CPUs from ZZF please let us know what the batch code is, L651B518 seems to be a nice one for OC
...TIA
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
L644Gs - to recap:
Post #39 - by AMD-me purchased from Cost Central, shipped from ???.
reported 3.1 @ 1.5V
Post #41 - by VietOZ purchased from ???, shipped from ???.
reported 3.2 @ 1.472V
Post #50 - by sofarfrome purchased from Cost Central, shipped from Tenn.
reported - 3.24 @ 1.475V
Post #51 - by WannaGoFast purchased from Nerds.net, shipped from Tenn.
reported - 3.2 @ 1.6V
Post #52 - by babalouj purchased from shopblt, shipped from Tenn.
no reported results
It would seem that the L644G, shipped from Tenn is experiencing some growing pains.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
Yes, the L651B518 does look to be better at the moment.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
6420 now at $185, that's quite good.
E6420, stepping L644G
wont boot around 3950ghz
Well, maybe there's hope for the L644G.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
There may be at that...after running orthos blend at 3.2GHz/1.45vcore for 5 hours I shut the system down and ran some errands today. I came back home and just for the hell of it I booted into windows at 3.2GHz/1.475vcore and clockgened up to 3.3. All good running 32M pi. Ran orthos and system rebooted. Increased the vcore to 1.5 and FSB in bios to give 3.3GHz and orthos ran for an hour. Stopped and clockgend up to 3.4GHz/1.5vcore. Orthos blend rebooted within 10 minutes. Rebooted and set vcore to 1.55 and FSB to 426 (3.4GHz) and right now orthos is running along fine (1 hour so far). Maybe there is something to "burning a chip in" as yesterday and this morning this chip would not even boot into windows at 3.3GHz and 1.6vcore set in bios. The coretemps are reading 57/57C at 1.55vcore so again this chip seems to run cool compared to others I have used on this board. And FWIW this $52 open box board from newegg ROCKS. Doesn't have a lot of features but sure as hell OCs chips very well.
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
And where are you seeing that price at?
err.. $185.97
http://www.shopblt.com/cgi-bin/shop/...er_id=!ORDERID!
the cheapest I see is mWave - $189 +7.02 shipping
What part of "Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn" don't you understand
Current Rig:
CPU: P4 2.6Ghz w/ HT @ stock
RAM: 1gig mushkin ddr-3200
MBD: Gigabyte 865p
Video: GeForce 128mb 6600GT
PSU: Enermax 420w
Sound: SB Audigy 2
HDD: 60gb ide and 160gb sata
PotGoblin what is the batch of the processor you got from ZZF?
I wanna get an E6420 but at the same time the E6600 looks like a good deal too, still trying to decide...
I already have an E6600 but it wont OC higher than 345mhz FSB... it will boot at 400mhz FSB but with 1.60v :S and not even stable, I hate my L628A.
Better hurry...they only have 1,125 in stock...at the rate these are being bought that may only last thru the weekend.
You think that they've already gone thru 775 of the first 1,000?
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
that link is for 6320, which is currently $169 at mwave
E8500 (4.2 ghz)
Crucial 800 8gb
Abit IP-35 Pro
Thermalright Ultra 120 Extreme
Hr-05 NB heatsink w/ 80mm fan
GTX260
Antec Quattro 850 psu
28" I-Inc lcd monitor
Logitech G9
Logitech G15
That's funny to me because I followed the link, saw the on-hand quantity, posted my sarcastic post...and never looked at the product description that showed it being an E6320. I clearly wasn't paying close attention, was I?
By the way, along with a good price on the E6420, mwave has the E4300 for $117, which is the best price that I've seen for a retail box, even with the $7-$10 shipping tacked on.
Now the big question is, of course, what stepping are they shipping.
Last edited by Reefa_Madness; 04-21-2007 at 06:59 PM.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
Do you people think an E6420 could be overclocked to 3.6Ghz if you get a good one???? (with a reasonable voltage of course)
I would really like an E6420 that could do 450mhz (x8=3600mhz)
I don't have my cpu from ZZF yet - i ordered it last night after I got home from work - should have it later this week.
won't do me much good yet since I am buying my system in 3 stages, got the cpu, ram and psu last night, next week when I get paid again i will probably order another $500 in parts. I hope to have all my parts purchased with in the next 3-4 weeks.
What part of "Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn" don't you understand
Current Rig:
CPU: P4 2.6Ghz w/ HT @ stock
RAM: 1gig mushkin ddr-3200
MBD: Gigabyte 865p
Video: GeForce 128mb 6600GT
PSU: Enermax 420w
Sound: SB Audigy 2
HDD: 60gb ide and 160gb sata
I'm contemplating buying a few of these, testing them, and then selling the ones that aren't the best OCer. But that sounds like a lot of work to test them all, lol.
Maybe I can just drop voltages at stock speeds and see which one will run with the least volts and go from there (kind of like Xeon testing?)
I just ordered two E6600's
I haven't decided yet what I am going to do, either pick one if it clocks good with low voltage keep it and return the other unopened conroe or if it does not clock good ..or is Vcore hungry I will have to open the second one
bummer...my bad
Posting Permissions
Reply With Quote
Bookmarks