Last edited by NaeKuh; 04-18-2007 at 05:58 PM.
http://i121.photobucket.com/albums/o...2/Shot0042.jpg
E6600 L631F (yeah F sucks) ambient 23C(getting hot here in Cali)
thats 1.67V set in bios ... how much it droop i dunno PC Probe says 1.63, 1.62v.. while Everest/Speedfan says 1.54v .. which i dont think that a boaard can droop .13v ... anyway load 57C, idle was like 32C i forgot doesnt matter ..
heres one with Asus PC Probe:
http://i121.photobucket.com/albums/o...Shot0056-1.jpg
blend means nothing ... that temp was prolly the lower one ... blend has 2 phases .. 1 stresses CPU which is 5C higher, and 2 stresses RAM which is lower .. blend just switches between the 2
oh yeah i did 5 hours of orthos small fft couple days ago .. but forgot to screenshot it
Last edited by theteamaqua; 04-18-2007 at 07:32 PM.
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
234234
Last edited by icrunk; 11-07-2007 at 02:19 AM.
You are as good as your samples are!
Still no reason to complain imho
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
hey largon i bought mine from overclock-uk really good store. usually takes 2 days by royal air mail to reach me ( live in joensuu= alabama of finland )
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
Just got my L647G413 and looks like it is a voltage hog. Need 1.5 for 3.65Ghz, but not for sure yet. Passed an hour of orthos so far.
Gonna start with high volts and ween it down.
Here is my 29B, I am not super impressed
oh sorry my voltage was 1.45V after dropp it comes out to 1.4V
Currently dual primeing 8x500, 1.648v after droop. This is just madness. Any lower voltage and either prime95 would just not run even for 1 minute. Load temps 46c for both cores (ambient temp 3c)
Q6600 (IHS removed) @ 3600 MHz 1.408v
DFI LanParty LT x48-T2R (1224 LT ICH9R modded bios)
4 GB Transcend Jetram @ 400 MHz 5-5-5-16 2T 1.872v
Sapphire HD4850x2 710 / 1075 MHz
PC-Power & Cooling Turbo-Cool 1kW PSU
2* OCZ Vertex2 extended 60GB @ raid0 @ ICH9R
5* Seagate 7200.11 1.5TB @ raid5 @ Promise EX8350 PCI-e RAID card
Dimastech Easy v2.5 bench table
DELL 3008WFP 30" + 2* Eizo Flexscan L887 20,1" (pivot)
Windows 7 x64
CPU EK Supreme Acetal LT | NB Swiftech MCW30 | GPU 2* Swiftech MCW60 | PUMP Phobya 400 | RAD DIY monster outside the house | TUBING 1/2" ID
Nope, crash after 30 mins. It's not worth it. Crappy conroe I've got.
Q6600 (IHS removed) @ 3600 MHz 1.408v
DFI LanParty LT x48-T2R (1224 LT ICH9R modded bios)
4 GB Transcend Jetram @ 400 MHz 5-5-5-16 2T 1.872v
Sapphire HD4850x2 710 / 1075 MHz
PC-Power & Cooling Turbo-Cool 1kW PSU
2* OCZ Vertex2 extended 60GB @ raid0 @ ICH9R
5* Seagate 7200.11 1.5TB @ raid5 @ Promise EX8350 PCI-e RAID card
Dimastech Easy v2.5 bench table
DELL 3008WFP 30" + 2* Eizo Flexscan L887 20,1" (pivot)
Windows 7 x64
CPU EK Supreme Acetal LT | NB Swiftech MCW30 | GPU 2* Swiftech MCW60 | PUMP Phobya 400 | RAD DIY monster outside the house | TUBING 1/2" ID
Gonna sell my L647G413. Looks like it is stable @ 3.6 with 1.51Vcore, running 1066 strap ram @ 1ghz. But I found a L629A that has seen 4ghz on mild watercooling. Gonna see what I can do with it
Q6600 (IHS removed) @ 3600 MHz 1.408v
DFI LanParty LT x48-T2R (1224 LT ICH9R modded bios)
4 GB Transcend Jetram @ 400 MHz 5-5-5-16 2T 1.872v
Sapphire HD4850x2 710 / 1075 MHz
PC-Power & Cooling Turbo-Cool 1kW PSU
2* OCZ Vertex2 extended 60GB @ raid0 @ ICH9R
5* Seagate 7200.11 1.5TB @ raid5 @ Promise EX8350 PCI-e RAID card
Dimastech Easy v2.5 bench table
DELL 3008WFP 30" + 2* Eizo Flexscan L887 20,1" (pivot)
Windows 7 x64
CPU EK Supreme Acetal LT | NB Swiftech MCW30 | GPU 2* Swiftech MCW60 | PUMP Phobya 400 | RAD DIY monster outside the house | TUBING 1/2" ID
L640A - hit 3.0Hz before having to up vcore from 1.325. Need 1.55 to maintain orthos stability at 3.4GHz.
These new batches stink! I wish I would have jumped on the bandwagon earlier.
Jeez..my L628A266 is not good at all
I need 1.525 v bios setting/powerslope on..DMM idle/load is 1.5v to hit 3500
I would love 3600 at same vcore but it just reboots 3Dmark05..which a real quick test of stability if you use cpu test 1 & 2
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
that sounds like my 29A .. very poor as well .. found the sweet spot at 3.3 1.42V loaded
man I am getting scared seeing all these new batches
Just bought a E6600 L651B588 and was able to reach 3.35ghz with stock voltage but crashes upon starting Orthos. Runs 3.2 stable on stock voltage.
Currently doing Orthos at 1.50volts at 3.53ghz. 1.55volts at 9x400=3.6ghz errored in 5 minutes.
Running on Gigabyte DS3 revision 3.3 motherboard with F11A bios and TT Big Typhoon and open case.
Last edited by jacky89; 04-23-2007 at 09:56 PM.
I must be the first person here with a batch that is in 2007.
E6600 L707A625
I have no idea how I got this batch. It says pack date of 4/17/07, that's madness! Intel put this processor on an airplane and flew it to Seattle where it ended up at Fry's!
Well, it kind of sucks. I'm trying to do Orthos on it at 3.40ghz with 1.52V (1.46 after Vdroop) and so far it's run 10 minutes without crashing. It was failing after 6 seconds (!!!) of Orthos at 3.6 and it failed after 3 minutes of Orthos at 3.44.
I'm not real optimistic at this point. Temperatures are through the roof, I have Scythe Ninja (original version) and 120x38mm 88cfm Panaflo and I'm getting 60C during this Orthos run with ambient at 35C. I don't think this is safe for everyday use. Oh well. Gotta keep burning away I guess.
CPU: C2D E6600 L707A625 3.32ghz/1.5V (1.43 w/Vdroop) Cooler: Scythe Ninja w/120mm Panaflo Mobo: Asus P5B Deluxe (FSB 415) RAM: 2x1GB Crucial Ballistix PC8000 @1038mhz 5-5-5-15 (2.25V) Video: Foxconn GeForce 8800GTX OC Edition 630/2152 Hard Drives: 2x74GB WD Raptor RAID0 (Boot), WD Caviar SE16 320GB, Maxtor DM10 200GB, WD Caviar SE 160GB Optical Drive: Pioneer DVR-212B Sound Card: Audigy 2 Misc: Leadtek Winfast TV2000XP (TV tuner) Display: Dell 2405FPW
I sure hope i get a good chip. My E6600 arrives TODAY......
"If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government"
-- Alexander Hamilton
Ordered my chip from Zipzoomfly last Friday (2 day air)
Received Batch: L649G Pack Date 4.12.07
I don't think anyone here as tried a 49G ? I get the rest of the equipment today but won't have my thermalright eXtreme until Thursday.
Bookmarks