Water Cooled Case Gallery

[Makubex_GB]

It's an A.C Ryan, got it from Performance PC's.

By any chance was that the PC-7077 they had left with the pre-made 3 x 120 A.C Ryan Radgrill at the top?

thats a great delta!

Thanks.

[AuroraProject]

By any chance was that the PC-7077 they had left with the pre-made 3 x 120 A.C Ryan Radgrill at the top?



Thanks.

Nope, I cut it up myself.

[Makubex_GB]

Nope, I cut it up myself.

Oh ok, cuz back when I was in the market for a PC-7077 they tried to sell me one like the one I described.

[ANP !!!]

Nope, I cut it up myself.

Did u cut that with a Saw ? or a dremel ?

[PilatuS]

Pilatus, nice case! How hard was the sound management foam to install and cut? What are your temps, I've always wondered if the foam affects temps, but if the whole system is minimal noise themed, I guess it wouldn't be accurate to judge the temps on just the foam. This is off topic, but I like the blinds/shades in the background, I am looking to alter that aspect of my computer room, any idea about the specifics on the material?

TY Aurora.

-yan

Tnx

The foam was really easy to cut en put in. 2 square meters of the stuff was only 7 euro's so if i messed up i did not matter. I did make a few mistakes with the cutting but i just did it over again.

My temps are okay but not really good. The CPU is idle about 40 degrees and the GPU is about 45. Stressed the CPU goes up to about 50 and 55 for the GPU. The temps could be alot better with the fans on 12 volt but i like the silence when they are on 6 volts. CPU temps come from TAT. GPU temps are from ATI Tool.

I think the foam does make the temps a bit higher but not much. The temps where about the same when the foam was not in it yet. The foam is more for the looks than really for more silence. I dont like to look at the alluminium of the case so i put the foam in. My old PC had the same stuff in it.

What do you mean exactly with the blinds/shades in the background ?

[Makubex_GB]

Here are some screenies of the load and idle temps I get with my dual heatercore setup. These were taken with a room temp of 27C.

I know Idle temps are not not that great, but I think the Load temps and Delta are pretty good.


CPU Idle:



CPU Load:



GPU Idle:


GPU Load:

[oclab]

[SharkerSk]

]

Rofl really crazy setup

[rhino56]

here is my latest build. im still not completely done but most of it is finished.








the original thread on building it
http://www.cryo-laboratory.com/forum...-computer.html

[AuroraProject]

Did u cut that with a Saw ? or a dremel ?

hey auroraproject:

what did you cut your holes with?

is HydrX and distilled the ONLY thing in your loop? no other additives?

how heavy is the 7B plus?

I cut the holes with a jig saw.

Yes, HydrX and distilled water only.

Shipping weight on the 7B was 15 pounds, box and packing was maybe 2 pounds, so 13 pounds.

[calvin]

Current state of play....
Loop:
CPU block: original storm G4
Rad: GTS360XFLOW
Pump: DDC2 with Alphacool top
Res: Alphacool Repak Res
Tubing: mix of 1/2 Primochill and 1/2 Tygon

[shteer]

Hi!

Modding & ownmade watercooling from Hungary

outside:



inside:








The blocks are designed by me, & my dude made that with CNC.

Its not the final state, the new CPU, NB, SB (designed 4 the SLI), mosFET & RAM block are under construction.

[Solarfall]

@shteer hey what case do you have, it looks pretty sleek and sexy..and that self made res is unbelievable. do you have a project log, i would really like to see some more pics of it.

BTW to XS mate

[septim]

shteer: a nice install you have there, although a little less elbow fittings would be better for you (if at all possible)

[shteer]

it was an Chieftech Dragon, but i didn't like that origonal face

i haven't got a project log in the XS yet, but you can watch the fabrication in 2 hungarian sites:
http://www.radikalmod.hu/index.php?p=13&bid=25 &
http://prohardver.hu/f.php?mod=40&id=320423
but unfortunatelly some pictures are low-quality...

thx 4 the welcome!

[shteer]

septim: thx! i'll contemplate your advice do you think that obstruct the flow???

[ANP !!!]

septim: thx! i'll contemplate your advice do you think that obstruct the flow???

Yeah it restricts ur Flow way tooo much then u think.. n every elbow u use u loose some % of Flow.

[Greg_1]

My rig







These are from a little older rev

[rhkenji]

I have multiple rigs, the EK is on my main oc'ing/gaming rig. It's a few pages back on this thread.


Edit: post #2970, but even those pics are outdated. here's the finished job:





I have too many computers.

What case is this? I like the plain look and the color. i couldnt find it on newegg. What's it called?

[AuroraProject]

What case is this? I like the plain look and the color. I know that its lian li but i couldnt find it on newegg. What's it called?

They don't make it anymore, Lian Li PC-7077B.

[pvtdonuts]

Here's my most recent build with a Antec 900, everything is gonna be moved into a Stacker T01 in a few weeks and the cpu and 2 gpus will be put on a single loop with a PA120.3 and a new EK res

The new blocks

[TheReds]

pvtdonuts, you'll love the room in the stacker for your loop. Nice new parts also

[Makubex_GB]

What case is this? I like the plain look and the color. i couldnt find it on newegg. What's it called?

Yup, same case I have, except I have in silver version (PC-7077A). It's a pity they stopped making it. Best damn tower case I've seen to date. :thumbsup:

[2000army]

here is my Lian Li pc-201

[septim]

nice one there, only minor wire managment left and everythings cool.
pretty good jigsaw job there on top.