Conroe Overclock Database

[ghost101]

The E6300 data is lacking in the table. So i thought id just ask, how good are L627A chips at overclocking?

Thx

[theteamaqua]

i dont think he update this anymore ... he should like let couple people access the 1st post so that it gets update constantly

[zbomb5610]

The E6300 data is lacking in the table. So i thought id just ask, how good are L627A chips at overclocking?

Thx

I have an l627a in my comp right now, runs 3.65 stable with 1.55 volts though. But i still don't hit over 67 in temp which is fine with me. I think it might even go higher if i could just get more voltage to the north bridge, but my ds3 doesn't have a vmch mod since it is rev 3.3 and i am not sure how to figure it out.

but 522 fsb on the l627a is what i have and i am pretty happy with it.

[BvK]

yes mate, would love to. Gimme a few days to test as i dont get as much time on my pc as i would like at the weekends (GF refuses me lovin if im on it too long)

do you have any results yet? What does GF mean?

3.5GHz runs now with my E6400..7x 500MHz..screen update soon!

[theteamaqua]

CPU name : E6600
OC: 3705GHz 411x9
Stepping: B2
Week: L631F
Vcore: 1.58v in bios .. dont know about droop. im guessing 1.54v during load

Cooling: Water
Cooler brand/model: Swiftech Apogee GTX

Ambient Temp: 23C
Load Temp: fluctuate between 44C to 46C

Motherboard: Asus P5N32-E SLI PLUS
Bios Version: 0602
Operating System: Win XP PRO SP2

RAM brand: OCZ
RAM rated speed: PC8500
RAM actual speed: 1070
Latency: 5-5-5-15



http://valid.x86-secret.com/show_oc.php?id=184663

[safan80]

aqua what's your NB temp?

[theteamaqua]

i put a 120mm fan blowing it

hey tell me how u get bios settings to a text file?? for asus boards??

i see pppl do this:

vcore : ...v
vdimm ...v

linkboost : disabled

how u do that?

[safan80]

i put a 120mm fan blowing it

yes but what's your NB temp?

[theteamaqua]

no idea .. does NB temp matters?

[safan80]

no idea .. does NB temp matters?

on the P5n32-E SLI PLUS yes it does.

[theteamaqua]

the heatpipe dont feel very hot .. if that helps

[safan80]

the heatpipe dont feel very hot .. if that helps

you can install asus probe

it supports Win2K / WinXP / Win2003 / WinXP 64bit / Win2003 64bit / Vista 32bit / Vista 64bit

[likewhoa]

User Name: likewhoa
Stability: 8hours+ Blend Mode Orthos

CPU: X6800
OC: 3750MHz
Stepping: 6 B2
Week: L632
Code: A430
Vcore: 1.523v (cpu-z shows as 1.213)

Cooling: Water
Cooler brand/model: Swiftech Storm Rev2
Ambient Temp: 23C
Idle Temp: 35C
Load Temp: 50C to 60C

Motherboard: DFI Infinity 975X
Bios Version: 12/6
Operating System: XP 32 SP2

RAM brand: Mushkin
RAM rated speed: 8000
RAM actual speed: 511
Latency: 4-5-4-11

[CrimInalA]

User Name: CrimInalA
Stability: 48hours Blend Mode Orthos

24/7 settings :

CPU: E6300
OC: 3430MHz
Stepping: 6 B2
Week: L629
Code: A
Vcore: 1.39v (1.475 bios)

Cooling: air (passive)
Cooler brand/model: Scythe ninja
Ambient Temp: 21C
Idle Temp: 45C
Load Temp: 63C to 66C

Motherboard: Gigabyte DS3 rev 3.3
Bios Version: F11a (beta)
Operating System: vista ultimate 32bit

RAM brand: Team xtreme
RAM rated speed: 5300
RAM actual speed: 490
Latency: 5-4-3-10

Cpu-z crashed when i pressed save validation file while orthos was running , and vista crashed along happily .
So i took a screenshot with the ordinary camera
Cpu-Z validation :
http://valid.x86-secret.com/show_oc.php?id=185012

[safan80]

[

The Screenshot must have orthos/Prime running.. Idle or crashed results will not be included from now on.

[Rats]

haha pwned

[alpha0ne]

And another 48 hours later

[Metroid]

And another 48 hours later

Amazing 48 hours on. Are you sure that board is still up and running

[theteamaqua]

you can install asus probe

it supports Win2K / WinXP / Win2003 / WinXP 64bit / Win2003 64bit / Vista 32bit / Vista 64bit

well my infrared thermometer just arrived .. i measured the NB heatsink its about 100F ~ 38C idle , and about 110F during load.. the one right above it

the extended one was like 85F idle and 93F load

[CrimInalA]

The Screenshot must have orthos/Prime running.. Idle or crashed results will not be included from now on.

i don't care if i make it to the table or not
my hardware is rock stable

[zbomb5610]

I got my g.skill hz's in yesterday, tossed them in and tried to figure out what timings i could get it to run with my overclock.

Problem was that it seemed like my system wasn't handling the same overclock at 1.55 vcore, so i ended up doing 3.535 w/ 1.48 vcore instead. Still pretty happy with the results.

User Name: Zbomb5610
Stability: Orthos (11+ hours)

CPU: e6300
OC: 3535 mhz
Stepping: 6 B2
Week: L627
Code: A792
Vcore: 1.48

Cooling: Air
Cooler Brand/Model: Scythe Infinity

Motherboard: Gigabyte 965P DS3 Rev 3.3
Bios Version: F11a
Operating System: Windows XP 32

RAM Brand: G.Skill
RAM Rated Speed: PC6400
RAM Actual Speed: 1010
LATENCY: 4-4-4-8 @ 2.2v

[safan80]

i don't care if i make it to the table or not
my hardware is rock stable

I'd say it is! good job!

[GrimReaper]

sorry i was on a long vacation! call it getting involved with somebody i guess lol ! I got back and i will be updating this tmr!

cheers

[JohnnyV]

hope you had a good holiday.... now get your (banana) to work!

[Comminadian]

User Name: Comminadian (Replace my other entry please)
Stability: 9 Hours Orthos

CPU name : Xeon 3060
OC: 3702 MHz (463x8)
Stepping: 6 B2
Week: L628
Code: B299
Vcore: 1.42v @ Load (1.42v idle, 1.4375 BIOS, Board is pencil modded for vDroop)

Cooling: Water
Cooler brand/model: Apogee GT

Motherboard: Asus P5B-Dlx
Bios Version: 0804
Operating System: XP 32

RAM brand: G.Skill
RAM rated speed: PC6400
RAM actual speed: 926 MHz
Latency: 4-4-4-12