my first time 8800gtx under DI + QX67 under LN2

[VictorWang]

first time to play 2pot alone, toooooo busy
cpu cold bug @ -140c idle, big headache.
vga under DI cooling @ -65c idle, -58c load, 1.65v (pot temp).

this is just a try, still a little bird to play vga under xs cooling


1st/2nd results = x68 under DI, vga under DI. that's too easy to play.
with ram=1200 4334, 05=25194
with ram=950 3338, 05=249xx
so.....hipro5, look at here
asus mobo is different, higer ram clk always have better results.
in pi_32m running, 500mhz 3338 2T is slower than 600mhz 4335


3rd result= qx67 under LN2, vga still under DI.
tooooo hard to play this time, cant even sit down, especially cpu have coldbug problem.
and it's just a try running, only use 1 single psu: zippy 850w, so cannot running higher 'coz not enought power.

[Dynasty]

very nice single card results VW.........

[PanteraGSTK]

That's only 13k higher than my score! Nice results.

[Fr3ak]

Great scores Victor!

Looking at your scores, I am getting the impression that I need a new video card or two ^_^

[Delex]

Wow, nice clocks Victor! You can't get more MHz on X6800?

BYe bye

Alex

[JT from Russia]

very nice single card results Victor

[hipro5]

f1st/2nd results = x68 under DI, vga under DI. that's too easy to play.
with ram=1200 4334, 05=25194
with ram=950 3338, 05=249xx
so.....hipro5, look at here
asus mobo is different, higer ram clk always have better results.
in pi_32m running, 500mhz 3338 2T is slower than 600mhz 4335

Nice start BUT........you STILL not playing 1:1 and Cas 3 - 3 - 3 - 4 - 1T to see THE difference.....

[VictorWang]

Nice start BUT........you STILL not playing 1:1 and Cas 3 - 3 - 3 - 4 - 1T to see THE difference.....

lol....425fsb+ is less efficiency 'coz of 1333fsb strap
and ... Asus mobo
cannot running 1T while ram>ddr2_800

[k|ngp|n]

first time to play 2pot alone, toooooo busy
cpu cold bug @ -140c idle, big headache.
vga under DI cooling @ -65c idle, -58c load, 1.65v (pot temp).

this is just a try, still a little bird to play vga under xs cooling


1st/2nd results = x68 under DI, vga under DI. that's too easy to play.
with ram=1200 4334, 05=25194
with ram=950 3338, 05=249xx
so.....hipro5, look at here
asus mobo is different, higer ram clk always have better results.
in pi_32m running, 500mhz 3338 2T is slower than 600mhz 4335


3rd result= qx67 under LN2, vga still under DI.
tooooo hard to play this time, cant even sit down, especially cpu have coldbug problem.
and it's just a try running, only use 1 single psu: zippy 850w, so cannot running higher 'coz not enought power.

Nice results as always Vic
Sit down while benching? Wha? You can forget about that now

[hipro5]

lol....425fsb+ is less efficiency 'coz of 1333fsb strap
and ... Asus mobo
cannot running 1T while ram>ddr2_800

Boot up at 400MHz fsb and raise it through clockgen.....Isn't it Striker?.....

[VictorWang]

Nice results as always Vic
Sit down while benching? Wha? You can forget about that now

haha, I can sit down all the time if I play 3pots under DI, but...if only 1pot under LN2, there's no chance to sit
so I think OC with LN2 is a kind of sports

Boot up at 400MHz fsb and raise it through clockgen.....Isn't it Striker?.....

lol, on p5n32-e sli, it cannot.
on striker... currently my striker sux and cannot bench at 1600fsb/1200ram

[over@locker886]

Nice actions

Zippy 850W not enough for 1pcs Kentsfield+1pcs 8800GTX?seriously

I think little joke

[CapFTP]

so I think OC with LN2 is a kind of sports

LOL...nice philosophy..

Hipro.....I still don't understand your advices on running ram 1t 3.3.3.....I tested your config and tried also running memory higher and higher 2t, 4.4.4 and 4.3.3, but best result are aligned to Victor numbers.....tighter timings on high frequencies give me the best score....

...i think I'm missing something...

[VictorWang]

Nice actions

Zippy 850W not enough for 1pcs Kentsfield+1pcs 8800GTX?seriously

I think little joke

let's calculate 12v rail only !
qx67 @ 1.7v 4.6Ghz is about 450w TDP
8800gtx @ 1.65v 900mhz is about 350w TDP at least.
HDD, Fan, motherboard = at least 60w TDP
so....sum all, about 950w TDP, and it's only 12v

now u need what kind of PSU is needed to bench qx67>5G and 8800gts sli>900/1200

[over@locker886]

let's calculate 12v rail only !
qx67 @ 1.7v 4.6Ghz is about 450w TDP
8800gtx @ 1.65v 900mhz is about 350w TDP at least.
HDD, Fan, motherboard = at least 60w TDP
so....sum all, about 950w TDP, and it's only 12v

now u need what kind of PSU is needed to bench qx67>5G and 8800gts sli>900/1200

hm, it's really lot TDP I think cheaper way if we connect 2 psu.

[hipro5]

Hipro.....I still don't understand your advices on running ram 1t 3.3.3.....I tested your config and tried also running memory higher and higher 2t, 4.4.4 and 4.3.3, but best result are aligned to Victor numbers.....tighter timings on high frequencies give me the best score....

...i think I'm missing something...

2k5 for reference.....

THIS is with Corsair 8000ULs - Faties - at 400MHz with Cas 3 - 2 - 2 - 2 - 1T - 19 - 1 - 6 - 2 - 7.8us .....

http://service.futuremark.com/compare?3dm05=2889158

.....and THIS is with Team Group 1200s at 600MHz with Cas 4 - 3 - 3 - 3 - 2T - 1 - 19 - 1 - 6 - 2 - 7.8us .......

http://service.futuremark.com/compare?3dm05=2889259


AS we see, there is a 200MHz DIFFERENCE between Ram speed......
Now, SHALL I play with my Faties at 429MHz.?........

EDIT:ABIT QuadGT with the i965 in the "game"....514MHz at 1:1..... for comparison reasons.....

http://service.futuremark.com/compare?3dm05=2930704



2k3 for reference.....

THIS is with Corsair 8000ULs - Faties - at 400MHz with Cas 3 - 2 - 2 - 2 - 1T - 19 - 1 - 6 - 2 - 7.8us .....

http://service.futuremark.com/compare?2k3=5298784

.....and THIS is with Team Group 1200s at 600MHz with Cas 4 - 3 - 3 - 3 - 2T - 1 - 19 - 1 - 6 - 2 - 7.8us .......

http://service.futuremark.com/compare?2k3=5299073

AS we see, there is a 200MHz DIFFERENCE between Ram speed......

EDIT:ABIT QuadGT with the i965 in the "game"....514MHz at 1:1..... for comparison reasons.....

http://service.futuremark.com/compare?2k3=5316273



2k6 for reference.....QUANTITY OF RAM MAKES NO DIFFERENCE AT ALL...

THIS is with Corsair 8000ULs - Faties - at 400MHz with Cas 3 - 2 - 2 - 2 - 1T - 19 - 1 - 6 - 2 - 7.8us .....

http://service.futuremark.com/compare?3dm06=1637655

.....and THIS is with Team Group 1200s at 600MHz with Cas 4 - 3 - 3 - 3 - 2T - 1 - 19 - 1 - 6 - 2 - 7.8us .......

http://service.futuremark.com/compare?3dm06=1637442

AS we see, there is a 200MHz DIFFERENCE between Ram speed......

EDIT:ABIT QuadGT with the i965 in the "game"....514MHz at 1:1..... for comparison reasons.....

http://service.futuremark.com/compare?3dm06=1722438




2k1 for reference....Here we see a SMALL difference...

THIS is with Corsair 8000ULs - Faties - at 400MHz with Cas 3 - 2 - 2 - 2 - 1T - 19 - 1 - 6 - 2 - 7.8us .....

http://service.futuremark.com/compare?2k1=9179834

.....and THIS is with Team Group 1200s at 600MHz with Cas 4 - 3 - 3 - 3 - 2T - 1 - 19 - 1 - 6 - 2 - 7.8us .......

http://service.futuremark.com/compare?2k1=9179909

AS we see, there is a 200MHz DIFFERENCE between Ram speed......

EDIT:ABIT QuadGT with the i965 in the "game"....514MHz at 1:1..... for comparison reasons.....

http://service.futuremark.com/compare?2k1=9185871


You HAVE to play with Nowadays Rams at Cas 3 - 3 - 3 - 4 - 1T - 1(or 8) - 17 - 1 - 6 - 2 - 7.8us and over 435MHz to match it.....


.

[VictorWang]

I'll try on nv's refference board after I go back home
I'm now in HK and will fly to IDF few days later, I think I need to buy a cascade for daily practice overclking and improve my tweak skills to have better results, especiall for 01 and 03

[v|aDy]

Congrats! Very Nice results for single card!

[SilveradoJ442]

Very cool! Any pics of the benching?

[LittleDevil]

Great results Victor!

regards

[hipro5]

I edited my above post coz I add ABIT QuadGT with the i965 chipset for comparison reasons.....