Asrock 775Dual-VSTA Volt Mods

[Alchemist]

EDIT
Member (ProStock) in another forum got 320FSB with volt mods and using the below bios settings.


Quote
Well im back & very pleased With the results

First I would like to say big thumb up to the community you guys got a Great Forum !!
& Also a special Thx To Mallet & Jimmor with out your great infos i wouldn't be able to achive that project

So here we go Specs System OC@320FSB Prime Stable Core=1.45v Vtt=default Vagp=1.8v

Motherboard Asrock-775dual-vsta Cpu Intel-E4300 Memory OCZ Platinum Pc6400 Video card ATI X1950Pro Agp
Cpu heatsink Ocz VindicatoR Chipset heatsink Swiftech MCX159-CU Video Card Heatsink Accelero X2

Bios Settings....

Advanced:

Overclock Mode - CPU,PCIE Async.
CPUFr. - 320
PCIE Fr. - 117
PCI Fr. - 34.78
Spread Spectrum - Disabled
Boot Failure - Disabled

Max CPUID Val. - Disabled
Intel Virtuali. - Disabled
CPU Thermal Thr. - Disabled
No-Execute Memory. - Disabled
Intel Speedstep - Disabled

Chipset:

Dram Freque. - Auto
Flexib.- Disabled
Cas Latency - 3
Interleave - 4-Way
Precharge - 4
Tras - 12
trcd - 4
trfc - auto
trrd - auto
trtp - auto
twtr - auto
twr - auto
Bus Select.- Dual
Command Rate - 2T

Advanced Memory... all default
Advanced Host Conf:
Pipeline DRQCTL - Enabled
all other default

DRAM Voltage - Normal
AGP Voltage - High

Primary Gra.Adapt. - Agp
AGP - 8X
AGP Fast Write - Anable
AGP Aperture Size - 256MB
AGP Staggered delay - auto
AGP GADSTB - auto

V-Link - Normal
PCI delay Transaction - Disable <--- if anable Audigy wont work
IDE Drive Strenght - normal
PCIE Downstream Pipeline - Auto
Onboard LAN - enabled
Onboard Sound - disabled

ACPI - default

IDE - default

PCIpnp - default

Floppy - Disable
Super IO - all disabled
USB Conf. – default

system runs smoots & i just finish Stalker at 1280X1024 no crash simply pure enjoyment
now i cant wait to get my vapochill been refill with R504 that baby as been on idle for too long now due to a leek in the evaporator