Water Cooled Case Gallery

[vicfalc09]

Do you guys have any idea what newls1 is talking about in post #3346? Im getting 27 C on core temp, I am using the fan that came with the swiftech kit dont know what kind.

Thanks.

Oh yeah:

I am at 3.2Ghz on a E6400


Another pick from a different angle.

[Okda]

he means that the bottom hole of the reservoir should be connected to the inlet hole of the pump

[vicfalc09]

Yeah and it is.

[Okda]

it is not clear in ur pictures to which inlet it is connected so that si why he suggested that

can you please report ur temps using a single 120 rad and also ur system specs

create ur own sig

[bundymania]

@ranker: i use a piece of 5mm "clear" plexi with this:

http://cgi.ebay.de/Farbfilterrahmen-...QQcmdZViewItem

it´s very heat resisting.

[ranker]

@ranker: i use a piece of 5mm "clear" plexi with this:

http://cgi.ebay.de/Farbfilterrahmen-...QQcmdZViewItem

it´s very heat resisting.

Bundy, could you provide an instruction on how to build that mod and exactly what materials you used and where to find it? It looks amazing! and I've love to add something like that into my case. Thanks!

[JacobF]

Finally it is up and running! Need to try to get those air bubbles out My CPU idles at bout -5c.

[Okda]

nice -5c , what about load temps ?

[ANP !!!]

Wht type of Coolant do u guys use ??

Some of u guys are just using Distilled water .. is it safe ?? like 100% distilled water ??

Some Pics of my current set-up. With new E6600!


Let me know what you guys think of it.

Yet another amazing looking 810 build

Can u post a pic of ur rad mount, i m building a similar WC like u wiht a PA120.3, Can u post a pic from the bottom of ur Stacker ?? coz i wanna see how u managed to mount the fans n then the RAd thx

[lowfat]

Do you guys have any idea what newls1 is talking about in post #3346? Im getting 27 C on core temp, I am using the fan that came with the swiftech kit dont know what kind.

Thanks.

Oh yeah:

I am at 3.2Ghz on a E6400


Another pick from a different angle.

what size tubing is that? 3/8? Looks good.

[Patriote]

What type of Coolant do u guys use ??

Some of u guys are just using Distilled water .. is it safe ?? like 100% distilled water ??

On this build i used about 96% Distilled water with 4% Zerex. I have lots of stuff coming today

Yet another amazing looking 810 build

Can u post a pic of ur rad mount, i m building a similar WC like u wiht a PA120.3, Can u post a pic from the bottom of ur Stacker ?? coz i wanna see how u managed to mount the fans n then the RAd thx

Ill take pics just for you now

[ownage]

Do you guys have any idea what newls1 is talking about in post #3346? Im getting 27 C on core temp, I am using the fan that came with the swiftech kit dont know what kind.

Thanks.

Oh yeah:

I am at 3.2Ghz on a E6400


Another pick from a different angle.

Nice

What Load temps do you get on 3.2Ghz??,
And do you know the load temps on Higher speeds/volts?

[Patriote]

Here they are. Excuse the dust but im about to re-do my loop with my new FuZion WB, new additives, new res etc.. so why bothering to clean it out right now ?















I'm actually proud of how i managed to mount the pump

PS: If you have questions go ahead.

[ANP !!!]

Here they are. Excuse the dust but im about to re-do my loop with my new FuZion WB, new additives, new res etc.. so why bothering to clean it out right now ?


I'm actually proud of how i managed to mount the pump

PS: If you have questions go ahead.

Thx buddy ,

did u do any kind of modding to fit the Rad on the bottom ?? or u just removed the mesh air duct n drilled holes for the fan n mounted the whole thing ??

[Edit]

I see u did some cutting work down there..Hmm i like ur idea tho .. nice work..

i will try to do the same

[Patriote]

Hehe, yeah i used a jigsaw to make the hole bigger. Not the best work of all but it works just as good.

[marauder16]

@jAkUp what about condensation with that TEC? did you put sth to prevent it? I mean, you need condensation prevention for anything under ambient temps, otherwise great build

@vicfalc09 wow, very very nice P180 build, great job, nice and clean =)

[Patriote]

stills looks good to me, great mod and good luck on the upgrades.

andyc

Thanks m8

New stuff has arrived from Petra's Tech shop today :





Well, thats what i call a tight seal

[Solarfall]

Patriote nice looking stacker you have there

[PenumbralFigure]

How does that work out for you, with the rad being on bottom? Does it ventilate well? Temps?

[justin_c]

Thanks m8

New stuff has arrived from Petra's Tech shop today :





Well, thats what i call a tight seal

Off topic, how much did you pay for shipping and customs for buying cross the border (from Petra's)?

[Patriote]

Patriote nice looking stacker you have there

Thanks m8!

How does that work out for you, with the rad being on bottom? Does it ventilate well? Temps?

It works pretty well. Has been running like that since a few months now with 3 different loop. (same rad mounting way but with 3 different loops. D5, MCP355, Storm, Apogee, MCW60s etc...) And always had super temps. As you can see, between the case and Rad grill i placed some mosquito net so that the comp doesn't become a dust crap.

With my new E6600 (And my current WC set-up) at 3.6Ghz (9x400) 1.42v i never get temps over 48Degrees After few hours of stressing (Fans undervolted) with Orthos Small FFTs - Stress CPU test. And i idle at about 23Degrees.

3.6Ghz Idle

Temps with stock E6600

Temps at Idle after 12hours stressing

3.6Ghz while stressing

Off topic, how much did you pay for shipping and customs for buying cross the border (from Petra's)?

The order did cost about 120$ USD if i remember right. And Quoc labeled the box as a gift and i paid 17$ CAD Canada post fee for handling priority courier\EMS items ?! I thought i was supposed to pay nothing but oh well 17$ CAD isn't that bad.

[ANP !!!]

Hehe, yeah i used a jigsaw to make the hole bigger. Not the best work of all but it works just as good.

Hmm thx m8 ..

i will try to do the same :P:

[Patriote]

those are excellent temps patriote! whats your ambient? thats an incredibly low voltage on that 3.6 too, have you tried 4.0? thats good looking stuff

Heh yeah they are and i hope they'll be even better with new stuff that arrive today

Nope haven't tried anything higher. I received the E6600 about a week ago from a good friend and i tried 3.6Ghz right away with 1.4v After some tweak i found that it needed 1.42v to get stable for many hours of Orthos.

I won't have time to do some more Ocing or re-do my loop with my new parts for some time. My dad is at the hospital and have much more thing to see before. But ill be sure to post back some pics when im done

[[cTx] Nooc]

God you guys have beautiful systems

Hats off to Vicfalc09 and Patriote

[ANP !!!]

Heh yeah they are and i hope they'll be even better with new stuff that arrive today

Nope haven't tried anything higher. I received the E6600 about a week ago from a good friend and i tried 3.6Ghz right away with 1.4v After some tweak i found that it needed 1.42v to get stable for many hours of Orthos.

I won't have time to do some more Ocing or re-do my loop with my new parts for some time. My dad is at the hospital and have much more thing to see before. But ill be sure to post back some pics when im done

NP man, family always first.. so just take ur time

n i hope ur Dad gets well soon.