Water Cooled Case Gallery

[bundymania]

thx for your comments guys !

i dunno the correct translation yet, but i think you know what i mean, with "food color" (cake decoration etc.) for the red effect in my sys. i use 10ml for this cherry red with dest. water and innovatek protect anti-corro stuff.

http://cgi.ebay.de/LEBENSMITTELFARBE...QQcmdZViewItem

[noel82]

good system DocEE...nice hardware & nice assembly

[DocEE]

ty Noel82 for your comments, to sacha35 the artwork was factory made by alienware for the star wars desktops they sold. and well the lame thing is that its not artwork. its just a HUGE sticker that goes on the panels, LOL

ty w00t w000t

[Okda]

nice system u got there DocEE

and very very bad to know that it is just a sticker

and i am really amazed to know that a dual rad is enough for ur very restrictive and big loop

[DocEE]

i had the similar system before with an alienware case as well. a8n-sli prem, 3800x2, SLI 7900gtx, and the cpu (apogee) and vid cards were cooled (DD NV-78) and with this case since its very restrictive the temps do go up when all closed but with the WC its no problem, and with this rig before i mounted everyting i ran initial tests with the full loop, NB,SB, vid cards, cpu, and temps were fine outside, and when inside temps are still excelent in the CLOSED case, trying to figure out though how to get more air moving inside the case,

ty for your comments, need ideas of how to get some FRESH air into it,
w000t w000t

[JacobF]

Still working on it...

[ranker]

What's that plexiglass looking mod that you put on top of your topmost video card? Does anyone know if that's a purchasable mod or do you have to do it yourself (if so, how do I get started!?) That looks like an awesome way to make it look good and protect yourself from possible leaks!

[Omastar]

What'd you change, jakup? Is that a Swiftech MCW6500 TEC or whatever on your CPU? And what case is that? Looks good for WC'ing.

[serialk11r]

What'd you change, jakup? Is that a Swiftech MCW6500 TEC or whatever on your CPU? And what case is that? Looks good for WC'ing.

The case looks like a Lian Li G70, might not be, but I think it is. And yea, he's using the 6500 block (which has 5 times more restriction than a STORM!!!! lol I guess performance is everything). http://www.xtremesystems.org/forums/...60#post2099360 that's it.

[Omastar]

Oh, okay. I missed his sig somehow, but it's a Lian-Li G75B.

[perfection]

The case looks like a Lian Li G70, might not be, but I think it is. And yea, he's using the 6500 block (which has 5 times more restriction than a STORM!!!! lol I guess performance is everything). http://www.xtremesystems.org/forums/...60#post2099360 that's it.

the insides of the MCW6500 looks like the Apogee GTX, doesn't look restrictive at all

[tomb18]

Ranker,
Where did you find the fan grill that covers all 4 fans at the top of the case?
I've been looking for one and so far no success.

Thanks

[ranker]

Ranker,
Where did you find the fan grill that covers all 4 fans at the top of the case?
I've been looking for one and so far no success.

Thanks

That's not my case. I was merely commenting on how awesome that case build was. I'm trying to figure out if anyone knows what that plexiglass/LED combo looking thing above his video card is and where I can get it.

[Hellemyr]

thx for your comments guys !

i dunno the correct translation yet, but i think you know what i mean, with "food color" (cake decoration etc.) for the red effect in my sys. i use 10ml for this cherry red with dest. water and innovatek protect anti-corro stuff.

http://cgi.ebay.de/LEBENSMITTELFARBE...QQcmdZViewItem

I use the same stuff in my loop too, but i dont get the same nice red that you have. Maybe im not using enugh?

Maybe ill post some pics of my case here when i get the light sortet out

[AuroraProject]

Ranker,
Where did you find the fan grill that covers all 4 fans at the top of the case?
I've been looking for one and so far no success.

Thanks

There is 3 fans there, and it's a Radgrill.

http://www.performance-pcs.com/catal...12c48e8cc1fd45

[ranker]

pretty sure he fab'd it himself. he talks about it some on page 131, shows how he did the spikes.


andyc

What is it that covers his video card? Is it plexiglass?

[IanY]

The case looks like a Lian Li G70, might not be, but I think it is. And yea, he's using the 6500 block (which has 5 times more restriction than a STORM!!!! lol I guess performance is everything). http://www.xtremesystems.org/forums/...60#post2099360 that's it.

Is a single PA120.3 even good enough to run the MCW6500 plus the G80 blocks? I don't know about a 226W TEC being enough for an overclocked Kentsfield.

[Concept 5000-FX]

Hey jAkUp, Isee you got TEC under the block.
How much Watt ? What is your temp ?
You have amazing rig !

[_G_]

very nice build there mcoffey
I think its a unwritten rule around here that Horizon owners must have good looking gpu coolers (and nothing looks better than a EK full cover)

[perfection]

I've finally seen the insides of a DD 8800GX, looks crap, no wonder why people say the EK is better. I have one myself and love it

[vicfalc09]

Swiftech Apogee
MCP350
MCR120-QP
MCW-Micro Reservoir
SmartCoils

[newls1]

Swiftech Apogee
MCP350
MCR120-QP
MCW-Micro Reservoir
SmartCoils

You have your hose going into the res in the "NOT SO OPTIMAL" postition. The bottom of the res should be the "OUT TO PUMP", and the hole above that one (top one, but not the top fill hole) should in from RES. Incase this matters, just thought I wouold tell ya

[NickS]

Very clean P180 build

[vicfalc09]

Im not sure I follow the bottom hole on the res is going out to my pump. What do you mean????

[bito]

vicfalc09

Nice setup
What temps are you getting idle/load on TAT please and what fan is on the rad ?