New 4000+ Sandy WR & A64 non FX WR

[stunned_guy]

@ starostice
Why was your validation banned from hwbot ? Did you do some faking ?

[Schmetterling]

not bad here some 2x512MB Sticks

@HTT320 1:1 Corsair Twinx1024 3200XL TCCD
Timings 2,5.4.4.7.12.14.4.3.2.4 @ 2,8 Volt + 120 Lüfter


@HTT335 1:1 G-Skill PC3200/4000 GBLE 2x512 ohne ES
Timings 2,5.4.4.7.17.19.4.3.2.4 @ 3,2 Volt + 120 Lüfter


@HTT340 1:1 Geil one PC3200/4800 ES 2x512 without HS
Timings 2,5.4.4.7.17.19.4.3.2.4 @ 3,2 Volt + 120 Lüfter

Nice work there, I do have to note tho that mine werent maxed out and I could lower timings to get a higher clock

Btw, here's a sshot of 345Mhz:



I only got a CPU-Z validation of 350Mhz, was to stupid to save a sshot file :p

[stunned_guy]

WR with 2,5-4-4-8-1t and 512 MB Stick is in my sig @ 363 mhz.

[hey]

i want a good e4 revision sandiago!!

[massman]

@ starostice
Why was your validation banned from hwbot ? Did you do some faking ?

Not at all, the verification didn't came through.

I've fixed it, so you can see him at the top again

[gianni-gt]

good to know... i'll try it in the near future...

[OCPerformance]

Vali HTT 1:1 351 (350HTT Vali not possible so 351)
http://valid.x86-secret.com/show_oc?id=168752

[Turrican]

nice one OCP

[Schmetterling]

Vali HTT 1:1 351 (350HTT Vali not possible so 351)
http://valid.x86-secret.com/show_oc?id=168752

What type of cooling did you use? I can't boot my 4000+ over 300HTT (Not even with very low multi's)

[Turrican]

first quick super pi result of my 0633 epmw 4000+
i hope, more is possible

coldbug @
+3...~285htt
+11...~300htt
+20...~315htt

291x12=3496mhz @ 1.60V @ vapochill LS
ram ran pretty slow, because i forgot to raise vdimm (bh-5 )

[gianni-gt]

my 0626fpmw was superpi 1m stable at 3531mhz@1.8V yesterday under my chiller

[OCPerformance]

What type of cooling did you use? I can't boot my 4000+ over 300HTT (Not even with very low multi's)

Air with open Window

[Hystrix^]

http://s49.photobucket.com/albums/f2...current=24.jpg,

to be continued

[stunned_guy]

@ OCP
Will you crack my 361 MHz Dual Channel 2.5-4-4-8 ? Which voltage did u use ? I
did 3,58 V on my TCCD

[Turrican]

i hope here's some competition for you, gianni

Vcore: 1.67V
CPU-Temp: +16°C

3569.19 Mhz so far
http://valid.x86-secret.com/show_oc?id=182771

[stunned_guy]

Nice result, Turrican. Which cooling because of so high temps of 16°C ?

[Turrican]

Nice result, Turrican. Which cooling because of so high temps of 16°C ?

single stage (stock vapochill ls )

of course i had to to do a few things to get a higher temp :

i'm using almost no thermal compound + ricky tweak + i've loosend the evap a little bit.

no problem at all , hehe

[gianni-gt]

let's get 2V

[zipp0r]

what speeds have you guys been seeing when water cooling the 4000+'s ?
i can manage 3150mhz p95 24hrs stable 1.475v, temp reaches about 50c on air. no amount of extra voltage will get it any higher and pass p95.
ive seen them do about 3500 on phase, there seem to be a few in this thread as well!!

[gianni-gt]

this is also with water -> click i'll get this baby next week

[roro]

this is also with water -> click i'll get this baby next week

Impressive this cpu. It's really a good silicon piece

[Schmetterling]

this is also with water -> click i'll get this baby next week

Stepping?

[gianni-gt]

0633epmw

[zipp0r]

mines 0626, i guess your batch is better :|

[gianni-gt]

new pi 1m 4000+ sandiego wr



i guess the ram speed is not correct... oc-calc told me ~254mhz