I just brought a multimeter & tested the mem voltages & was suprised by the results!!!!

When set at 2.10V in the bios I get a reading of 1.90V on my multimeter!!!!
When set at 2.20V in the bios I get a reading of 2.00V on my multimeter!!!!

I check my 12V rails & the read fine at 12.20V which I thinks shows the multimeters not that out!!!!

Do you reckon the boards knaffed?

As I could run 500Mhz 4-4-4-5 2.25V with my G.Skill & now I can't get it past 980Mhz 2.4V!!!!!