Hi everyone. I wanna brag about my opty too after seeing all of yours.
Opty 175 3081 MHZ 1.312V The infamous CCBBE 0617 EPWM
DFI Expert
7900GT's in SLI
Ambients 71-72F
My cooling
mmmmmm, i think i hit 3.37 on 1.52V . But i bought a QX and was messing with it for a while. Sold the QX and went back to this baby. I honestly i like to keep things chilly. BTW im half debating on dropping my TEC that i pulled off the QX onto this rig. But, time is not letting me get around to it. :T
Last edited by NaeKuh; 03-10-2007 at 10:29 PM.
Wow, sweet OC for a 175!
Core 2 Quad Q6600 @ 3.2 ghz | Gigabyte EP45-DS3L | TuniQ Tower 120 | 4gb Corsair DDR2 6400 | XFX GTX 285 "Black Edition" | XiFi - Extreme
750 Watt PC Power and Cooling "Silencer" | Antec Ninehundred case | Saitek Eclipse keyboard |Acer AL2416W 24" HD LCD
[My Heatware]
[Check this out!]
whats really funny about my CPU is she doesnt like 1.45V She either likes it lower then 1.4 or higher then 1.5
I have no idea why... but as you can see, any chip that oc's to 3.0ghz on stock voltage is thumbs up for me.
But yeah... anyone else with a CCBBE 0617 EPWM should test this theroy.
I fail at 2.9ghz on 1.4V incase your wondering. Its REALLY REALLY wierd. And on stock voltage i'll prime for hours and hours at that clock.
Well got a LCB9E 0652WPMW.
Will install tonight and see how it goes
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
My Opty 185 has so far OC'd as follows:
Stock 2600 @ 1.3v
OC to 2733 @ 1.3v
OC to 2880 but needs 1.35v to startup and 1.42v (5%) to pass Prime testing.
Full load (two FAH clients running) temps are about 50c.
Asus Maximus VIII Ranger Z170 : Core i5-6600K : EVGA RTX2080 XC : 16Gb Corsair Vengeance DDR4-3200 : 256Gb Crucial MX500 : Corsair H100i : PCP&C 750w 60A : CM Cosmos S : Windows 10 x64
Asus Z8NA-D6 : Dual Xeon E5645 : 24Gb DDR3-1333 ECC : MSI GTX470 : 120Gb Samsung EVO 840 : 1TB HDD : PCP&C 750w 60A : CM Stacker : DD MC-TDX, EK-FC470, RX240+RX120, D5 X-Top, BayRes : VMware ESXi 6.7.0 - VM's - WCG crunchers x 5 (Ubuntu 18.04 LTS), Mint 19, Windows 10 Insider Preview
Sophos XG 17.5.3 running on GA-Z97-Wifi : Core i3 : 8Gb DDR3-1600 : 120Gb SSD : Corsair H80
BenQ GW2765, Aten 4-port KVM, Asustor AS5002 4Tb NAS, Belkin 1500va UPS, Sky Fibre Max 80/20Mbps
Well currently Orthosing at 2.6GHz (260 x10) at stock voltage, temps with the XP90C are 50/57 C full load. I think I need to get that Tuniq Tower
But so far so good.
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
2.7Ghz passed Orthos at stock volts for 14 hours, but them locked up when I opened CBID and Coretemp at the same time
Any idea chaps?
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
what priority are you running orthos under? 1 or 10?
Main System: Core i7 860-Kingston LoVo DDR3 1866-eVGA P55FTW--2x Gigabyte GTX460's in SLI-Intel X25-M 80GB-WD Caviar Black 1TB 32MB Cache HDD-Razer Barracuda AC-1-Corsair TX750-Samsung Dual Layer DVD Burner-Pioneer Dual Layer DVD Burner-Cooler Master CM690-II Advanced-Thermaltake Frio
Secondary System: Core i3 530-eVGA H55-2x2GB Crucial DDR3 D9KPT -BFG GTX260-500GB Seagate 7200.12 HDD-Corsair HX620-NEC Dual Layer DVD Burner-Antec 300-Cooler Master Hyper 212+
@Draxx - CoreTemp is still beta 0.94 and there are reports of lockups and random reboots in their forum, I had a few as well mainly if I left it running in Systray but also when using CBid & CPUz.
I normally Orthos using Blend test @ Priority 5.
Asus Maximus VIII Ranger Z170 : Core i5-6600K : EVGA RTX2080 XC : 16Gb Corsair Vengeance DDR4-3200 : 256Gb Crucial MX500 : Corsair H100i : PCP&C 750w 60A : CM Cosmos S : Windows 10 x64
Asus Z8NA-D6 : Dual Xeon E5645 : 24Gb DDR3-1333 ECC : MSI GTX470 : 120Gb Samsung EVO 840 : 1TB HDD : PCP&C 750w 60A : CM Stacker : DD MC-TDX, EK-FC470, RX240+RX120, D5 X-Top, BayRes : VMware ESXi 6.7.0 - VM's - WCG crunchers x 5 (Ubuntu 18.04 LTS), Mint 19, Windows 10 Insider Preview
Sophos XG 17.5.3 running on GA-Z97-Wifi : Core i3 : 8Gb DDR3-1600 : 120Gb SSD : Corsair H80
BenQ GW2765, Aten 4-port KVM, Asustor AS5002 4Tb NAS, Belkin 1500va UPS, Sky Fibre Max 80/20Mbps
Only 1 at the moment mate, just doing basic testing, S&M first thing when I get home from workOriginally Posted by bt_medic04
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
I as well get random reboots while using core temp 0.94 and cpuz 1.39
312x9 = 2808Mhz stock volts
prime95 25.1 dual core edition 53 hours blend stable (I was away for the weekend)
35/36 load temps
water cooling cather's G4
Make sure you use 9 or 10 priority ...
Asus P5E@Rampage / Q9550 c1 @460x8.5@1,320v / Noctua NH-U12P / 2Gb x 2 OCZ Flex PC-9200@1105Mhz / Radeon4850 / OdinGT 550w
past
DFI nF4 Ultra / Opty170 CCBBE 0617 FPMW @ 2,7Ghz / XP-90 / 2x1Gb CellShock PC4000 / GF 7800GT / Enermax 460W
Well I'm happy its stable at 2.7Ghz 1.33v. Did about 5 hours Orthos priority 10.
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Hi everyone. I wanna brag about my opty too after seeing all of yours.
Opty 175 3081 MHZ 1.312V The infamous CCBBE 0617 EPWM
DFI Expert
7900GT's in SLI
Ambients 71-72F
My cooling
mmmmmm, i think i hit 3.37 on 1.52V . But i bought a QX and was messing with it for a while. Sold the QX and went back to this baby. I honestly i like to keep things chilly. BTW im half debating on dropping my TEC that i pulled off the QX onto this rig. But, time is not letting me get around to it. :T
Try running @ priority 10 for more than 8 hours, keep us updated! So far looks promising!!
OPTY 165 CCBBE 0616 XPMW@ 3.0 ghz @ 1.525 on H2O , IHS OFF 6-7c lower for each core!!
Corsair Nautilus 500 watercooling kit
2 x 1 GB Mushkin DDR 500 Redline
DFI SLI DR expert mobo
Geforce 7600 GS (I know, holding my pants for DX10 cards, either NV or ATI, whatever is faster)
2 x 160 gb WD SATA II Raid 0
1 x 80 gb WD PATA
NEC 3540 DVD burner
ATI HD tuner card
Audigy 2 ZS
Viewsonic VX2025 20.1" wide LCD
A third 165 added to my collection
LCB9E 0704XPMW
Will see what she does starting this weekend
Smiffy
CCBBE0610 hit 3050Mhz on 1.58v.
Asus Sabertooth P67.Sandybridge I7 2600K at 5Ghz
Corsair AX1200,16gb Gskill 2400,Asus Essence ST sound card,Sapphire R9 290
Corsair SP2500 speakers,Corsair Carbide 500R.Corsair H100 aio.
.
Can't wait to see how it goes!
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
Warmin it up a bit
2100Mhz on 1.250v
Smiffy
Last edited by Smiffy; 03-30-2007 at 11:09 AM.
Asus Sabertooth P67.Sandybridge I7 2600K at 5Ghz
Corsair AX1200,16gb Gskill 2400,Asus Essence ST sound card,Sapphire R9 290
Corsair SP2500 speakers,Corsair Carbide 500R.Corsair H100 aio.
.
Is that the best speed you can get at 1.250v yet? And is that on stock fan? Can't wait to see how this new 2007 variety performs on a nautilis...
Opteron 165 CCBWE 0633 XPMW is not very good, 2600mhz @ 1.4v max
boxed cooler.
Unfortunately the temp sensors are broken so this one is going rma. (:
Which E-tailer shipped out that stepping?
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
Komplett
Hi
At the mo yes.Shes under the Nautilus with a better radiator in (Black Ice Pro)
Although I cant get the lid on as I can't find any 1/4 bpst to 3/8th angled barbs anywhere.
Am now at 2600MHz on 1.3v but have not tested for stability yet.Idle temps are Core 0 24 deg c and Core 1 21 Deg C.
Will report load temps when Dual prime is up and running.
Smiffy
Asus Sabertooth P67.Sandybridge I7 2600K at 5Ghz
Corsair AX1200,16gb Gskill 2400,Asus Essence ST sound card,Sapphire R9 290
Corsair SP2500 speakers,Corsair Carbide 500R.Corsair H100 aio.
.
PS
They seem to have changed the design of the oem heatsink a bit.Will try and take some pics.
Once I can get the barbs for the Nautilus that will cool the 1900XTX with a swiftech MCW60
and then the Opteron will be cooled by a D-Tek Fuzion pumped by an Iwaki MD15R via a Black Ice Xtreme 3 radiator.
Smiffy
Asus Sabertooth P67.Sandybridge I7 2600K at 5Ghz
Corsair AX1200,16gb Gskill 2400,Asus Essence ST sound card,Sapphire R9 290
Corsair SP2500 speakers,Corsair Carbide 500R.Corsair H100 aio.
.
Load Temps at 2600Mhz on 1.3v Core 0 36 Deg C Core 1 39 Deg C
Smiffy
Asus Sabertooth P67.Sandybridge I7 2600K at 5Ghz
Corsair AX1200,16gb Gskill 2400,Asus Essence ST sound card,Sapphire R9 290
Corsair SP2500 speakers,Corsair Carbide 500R.Corsair H100 aio.
.
Not bad Smiffy. Did they change the OEM heatsink for the better or worse? Or at least from your observation?
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
Posting Permissions
Reply With Quote
Bookmarks