CPU-Z 1.39 is out

**cpuz** · 02-21-2007, 06:10 AM

Thanks, you're very welcome !

As soon as I get more information about K10 I'll update this 1.39.
A new CPU is not that common

**Tallman** · 03-02-2007, 05:55 PM

Hey,
I am also sorry for digging up an old thread but........
Every time I try to validate a cvf file, it says uploaded OK then it says
"file corrupt"

I have redownloaded it but still no luck.
I cannot use an older version as it tells me that is out of date, I should upgrade.

Any help?

Thanks
Jon

**cpuz** · 03-03-2007, 01:40 AM

Hi,
can you check if the size of the cvf is zero ?
This is unfortunately a side effect of the anti-fake protection, in some very rare cases it tends to be "too efficient" :-(

**Richard Dower** · 03-03-2007, 09:40 AM

I have CPU-Z 1.39.1...is it legit?, seems the CPU-Z "icon" has been changed..true?

http://bakkap.free.fr/Softs/cpu-z-139-1.zip

**Drager2** · 03-03-2007, 10:09 AM

Still no logo and multiler on my Cel M410

**Richard Dower** · 03-03-2007, 10:14 AM

Cel?...isin't that an obsolete CPU? (don't hit me!)

**Tallman** · 03-07-2007, 02:06 AM

Originally Posted by cpuz

Hi,
can you check if the size of the cvf is zero ?
This is unfortunately a side effect of the anti-fake protection, in some very rare cases it tends to be "too efficient" :-(

No, the size is not zero.
In windows explorer it says the size is 1KB, but if I check "Properties" of the file, then the size is 4.00 KB

**Hooker** · 03-17-2007, 03:20 PM

Sorry to bump this thread, but I found this quite funny:
http://valid.x86-secret.com/show_oc?id=178528

Both sticks are 512MB btw

**safan80** · 03-17-2007, 04:05 PM

Originally Posted by Hooker

Sorry to bump this thread, but I found this quite funny:
http://valid.x86-secret.com/show_oc?id=178528

Both sticks are 512MB btw

lol 4.5GB of ram

**ozzimark** · 03-17-2007, 05:01 PM

while we're pointing out oddities...

a friend an i were having fun last night, came up with this:
http://valid.x86-secret.com/show_oc.php?id=178496

but the bus broke

and the TRP is zero.. apparently repeatable:
http://valid.x86-secret.com/show_oc?id=178499

also, get the F3 revision chips displaying their revision properly

**marauder16** · 03-21-2007, 06:53 AM

another sorry for bumping but I have a question. Since I got my CPU to 426*9 (3.83Ghz) CPU-Z started acting weird, on idle it shows normal 9 multi, but on orthos load it shows 426*6 (approx. 2556Mhz), every other app. show normal freq/multi, help please? thnx

**cpuz** · 03-21-2007, 06:59 AM

Originally Posted by Drager2

Still no logo and multiler on my Cel M410

I'm afraid this is a bug

Can you send me a dump please ? (last tab, register dump)
Thanks !

**cpuz** · 03-21-2007, 07:02 AM

Originally Posted by marauder16

another sorry for bumping but I have a question. Since I got my CPU to 426*9 (3.83Ghz) CPU-Z started acting weird, on idle it shows normal 9 multi, but on orthos load it shows 426*6 (approx. 2556Mhz), every other app. show normal freq/multi, help please? thnx

This is not weird at all, this is C1E / EIST.

Originally Posted by ozzimark

while we're pointing out oddities...

a friend an i were having fun last night, came up with this:
http://valid.x86-secret.com/show_oc.php?id=178496

but the bus broke

and the TRP is zero.. apparently repeatable:
http://valid.x86-secret.com/show_oc?id=178499

also, get the F3 revision chips displaying their revision properly

THIS is weird

Could it be the system to be instable and make cpuz turn fool ? Does this happen at stock speeds (or at least at lower speeds) ?

**marauder16** · 03-21-2007, 07:05 AM

This is not weird at all, this is C1E / EIST.

sorry, but that's not it, everything similar to that has been turned off in BIOS before I even started OCing, I heard about that function and ruled it out immediately, maybe it's CPU-Z?

EDIT: Orthos, coretemp report correctly. and my cpu loads at 54C at this speed, and if it were on 2.5Ghz it would load on much lower temps

EDIT2: checked it out in BIOS now, C1E is disabled, even the virtualization technology is turned off, there is no EIST in there either, I really don't know why this happens, but it started happening after coming to 3.8GHz, at 3.7 I didn't see such problems, any other ideas?

**cpuz** · 03-21-2007, 07:56 AM

Please do the following :
save a register dump, and copy the following line in the post :

Code:

MSR 0x000001A0		edx = 0x00000040	eax = 0x60972489

Thanks.

**marauder16** · 03-21-2007, 08:11 AM

Ok, found it, here it is:

Code:

MSR 0x000001A0		edx = 0x00000040	eax = 0x60972489

what now?

EDIT: here is the that file, if it helps (att)

**cpuz** · 03-21-2007, 08:44 AM

Thanks !
C1E is not enabled, but EIST is enabled.

**marauder16** · 03-21-2007, 08:59 AM

Originally Posted by cpuz

Thanks !
C1E is not enabled, but EIST is enabled.

wow, thnx alot, is it possible that it is named another way in the BIOS? (goes to search the whole BIOS)
and can I ask how did you know that EIST was enabled?

EDIT: I can't find a setting which would disable it (EIST), any ideas? (I posted a question at the RD600 forum too)

**cpuz** · 03-21-2007, 10:35 AM

You're welcome.
EIST is bit 25 of eax register (here it is 0), and EIST is bit 16 (here it is 1).
If you're running XP, you can go in control panel -> power option and set the scheme to Home/Office desktop. It will disable EIST transitions (but EIST bit will keep being set).
You can use a MSR editor to change the value of bit 16 (CrystalCPUID includes one). In your case, you have to set it to :

Code:

MSR 0x000001A0		edx = 0x00000040	eax = 0x60962489

BIOS could also do that, look for something that includes "speedstep" word.

**marauder16** · 03-21-2007, 01:56 PM

Originally Posted by cpuz

You're welcome.
EIST is bit 25 of eax register (here it is 0), and EIST is bit 16 (here it is 1).
If you're running XP, you can go in control panel -> power option and set the scheme to Home/Office desktop. It will disable EIST transitions (but EIST bit will keep being set).
You can use a MSR editor to change the value of bit 16 (CrystalCPUID includes one). In your case, you have to set it to :

Code:

MSR 0x000001A0		edx = 0x00000040	eax = 0x60962489

BIOS could also do that, look for something that includes "speedstep" word.

thnx, I'll try and do sth, and btw. the power option was already set to home/office and I tried always on (read on intel's site it will stop eist) but no change. now I tried 3.7GHz and EIST doesn't activate, the multi stays 9, that's what is strange to me...

EDIT: got cpuid, but when editing I copy your what you wrote to 'WRMSR' and click on the button, then I click the 'RDMSR' button and there's no change, I made another registers dump, and there's no change there either?

**cpuz** · 03-22-2007, 01:09 AM

Same for me !
I think this bit is protected

only BIOS can change it then.

**marauder16** · 03-22-2007, 06:17 AM

Originally Posted by cpuz

Same for me !
I think this bit is protected

only BIOS can change it then.

a new bios just got launched, I'll flash it to see if that helps

**Richard Dower** · 04-01-2007, 11:05 AM

CPU-Z 1.39.2:

http://bakkap.free.fr/Softs/cpu-z-139-2.zip

**SiGfever** · 04-01-2007, 01:38 PM

With my P4d 945 and before CPU-Z always showed the correct voltage but with my e6600 running at 1.36v this is what is displayed? It never changes.

**~~gOJDO~~** · 04-01-2007, 04:02 PM

Originally Posted by cpuz

Hi,
can you check if the size of the cvf is zero ?
This is unfortunately a side effect of the anti-fake protection, in some very rare cases it tends to be "too efficient" :-(

To me it says "Dump corrupted".

Thread: CPU-Z 1.39 is out

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions