My Opty 185 has so far OC'd as follows:
Stock 2600 @ 1.3v
OC to 2733 @ 1.3v
OC to 2880 but needs 1.35v to startup and 1.42v (5%) to pass Prime testing.
Full load (two FAH clients running) temps are about 50c.
My Opty 185 has so far OC'd as follows:
Stock 2600 @ 1.3v
OC to 2733 @ 1.3v
OC to 2880 but needs 1.35v to startup and 1.42v (5%) to pass Prime testing.
Full load (two FAH clients running) temps are about 50c.
Asus Maximus VIII Ranger Z170 : Core i5-6600K : EVGA RTX2080 XC : 16Gb Corsair Vengeance DDR4-3200 : 256Gb Crucial MX500 : Corsair H100i : PCP&C 750w 60A : CM Cosmos S : Windows 10 x64
Asus Z8NA-D6 : Dual Xeon E5645 : 24Gb DDR3-1333 ECC : MSI GTX470 : 120Gb Samsung EVO 840 : 1TB HDD : PCP&C 750w 60A : CM Stacker : DD MC-TDX, EK-FC470, RX240+RX120, D5 X-Top, BayRes : VMware ESXi 6.7.0 - VM's - WCG crunchers x 5 (Ubuntu 18.04 LTS), Mint 19, Windows 10 Insider Preview
Sophos XG 17.5.3 running on GA-Z97-Wifi : Core i3 : 8Gb DDR3-1600 : 120Gb SSD : Corsair H80
BenQ GW2765, Aten 4-port KVM, Asustor AS5002 4Tb NAS, Belkin 1500va UPS, Sky Fibre Max 80/20Mbps
Well currently Orthosing at 2.6GHz (260 x10) at stock voltage, temps with the XP90C are 50/57 C full load. I think I need to get that Tuniq Tower
But so far so good.
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
2.7Ghz passed Orthos at stock volts for 14 hours, but them locked up when I opened CBID and Coretemp at the same time
Any idea chaps?
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Posting Permissions
Reply With Quote
Bookmarks