Hey Vince.....How's that?....

[hipro5]

That card was kinda sad, but congrats on the AM3 WR
Did you test how far the CPU went on 680i?

It could do on ABIT IN9 5310MHz easy.......Some tests I did at 5410MHz, could be done IF I'm "focused" on the CPU temp so as to control it.....To do so, VGAs MUST be under 2 x cascades, not to have to take care of them too.....

Thanks guys....

[Dynasty]

nice amk3 score.....

what memory did u use for this 8000UL's ?
If so what was ram timings, what was fsb @......
Also why lower shader down to
1200mhz, was higher shader limiting you from going over 918mhz on core ?


Thanks regards......

[hipro5]

nice amk3 score.....

what memory did u use for this 8000UL's ?
If so what was ram timings, what was fsb @......
Also why lower shader down to
1200mhz, was higher shader limiting you from going over 918mhz on core ?


Thanks regards......

Rams were at 417MHz and 1:1 - Corsair 8000UL - Fatbodies - SPD Moded by me with EPP and Cas 3 - 2 - 2 - 4 - 15.6uS - 8T - 21 - 5 - 8 - 8 - 6 - 3 - 4 - 3
Vdimm was at 2.74Volts...

GPU:
Core clocks at 974MHz
Shader clocks at 1998MHz
Ram clocks at 1215MHz

[dimcar]

Hipro on the work!!!



Gorillakos with a Lot of LN2!!!

[crotale]

I see a bunch of non-stock components on that 88GTX

Nice work HOT!

[DEVIL K-ce]

I see a bunch of non-stock components on that 88GTX

Nice work HOT!

Lol yes Extra coil's on this GTX

Great score Hipro


Regards
Martin

[k|ngp|n]

Hello there guys....

My first run of SLI went under disaster....
I have tested before the one VGA and I knew what it wanted for VGPU and VGDDR and I was OK as for this part....
The other VGA wasn't tested well due to luck of LN2 so we came to "yesterday".....

BOTH couldn't bench at 974MHz core.... OR - to be more specific - to understand that the second VGA wanted LESS VGPU to work that high, it took me all of my LN2......
Nothing good for the time been.....
After the big disappointment and left with few LN2, I dry them out and switched mobos.....
I placed my X6800 onto ABIT AW9D-MAX one and benched Aquamark with the first VGA that I knew its reactions.....
It was a bit easy I could say to bench her at 974/1244MHz but I preferred to bench her at 974/1215MHz to be sure....
I took this score which satisfied me for the time been....

NEXT time I know what to do though, how high and with what voltages I'll play.... The frequencies will be 974MHz core and 1244MHz rams.....One VGA to do so, needs 1.74VGPU and the other one 1.69VCore....except the 2k1 where the first needs 1.79VGPU and the second 1.75VGPU as for the Nature bench.....
I'll be back though BUT after the Cebit.....

Man...I figured something didnt go right , at least you got the am3 multi gpu score out of it. Benching 3 units is a nightmare when everything isn't running perfectly, you end up burning through all your ln2 with not alot to show for it . I have been there a million times as for every good ln2 3d session, there is one awful one for me. I will test every piece of HW seperately as to know what it can do, than when you get it all together one or two components doesn't want to play nice....really sucks.

....and Vince, EVEN at 5310MHz on 2k5, there is NO WAY to reach 115 marks on GT1....

Thanx for confirming that, I had a pretty good feeling this was the case already
You sure your not tweaking your memory enough??

[hipro5]

Thanks guys....
Yes there are some mods on the VGA's.....

Vince it's not "multi gpu score"......It's SINGLE GPU score on AW9D-MAX mobo with what left of the LN2.....Problem is that hwbot doesn't "recognise" if it's SLI or single vga and it puts it automaticaly like multi gpu...

[k|ngp|n]

Thanks guys....
Yes there are some mods on the VGA's.....

Vince it's not "multi gpu score"......It's SINGLE GPU score on AW9D-MAX mobo with what left of the LN2.....Problem is that hwbot doesn't "recognise" if it's SLI or single vga and it puts it automaticaly like multi gpu...

I see some extra caps and coils on that hipro-edition g80 there
I meant single gpu my bad...just checked over at hwbot and see what you mean.

[hipro5]

I see some extra caps and coils on that hipro-edition g80 there
I meant single gpu my bad...

Exactly....coils AND caps....

[k|ngp|n]

Benching 3 units is a biatch isn't it?

[Sampsa]

Sorry to hear, but same happened here in our last LN2 QX6700 + 8800 GTX SLI session, the problem was CPU. When we finally managed to run it at 4511 MHz (still poor clocks) and installed 8800 GTX SLI, CPU didn't work with high clocks anymore. And CPU + 2 x VGA consumes quite alot LN2. I'll also do some testing after Cebit but VGA clocks are not currently as impressive as yours (865/1165)

[hipro5]

Benching 3 units is a biatch isn't it?

Ask OPB.....He knows better.....No?....

Sorry to hear, but same happened here in our last LN2 QX6700 + 8800 GTX SLI session, the problem was CPU. When we finally managed to run it at 4511 MHz (still poor clocks) and installed 8800 GTX SLI, CPU didn't work with high clocks anymore. And CPU + 2 x VGA consumes quite alot LN2. I'll also do some testing after Cebit but VGA clocks are not currently as impressive as yours (865/1165)

Yes you just can't do as you have planned......On 975 and ATI's were different though.......You knew were your CPU goes, were your (each) VGA goes and combined them all together, you were ready....With this i680 chipset, things are crazy.......I don't know....!....

[s7e9h3n]

Ask .........

George Let's just try to keep the peace

[kemo]

Good score hipro , hopefully you got better luck next time

Some tests I did at 5410MHz, could be done IF I'm "focused" on the CPU temp so as to control it.....To do so, VGAs MUST be under 2 x cascades

that means that you will run AM3 dual cards under cascade for higher CPU clock

[hipro5]

George Let's just try to keep the peace

Yes ......sorry........BUT 115fps on GT1 of the 2k5.....Are we idiots or something?......

Good score hipro , hopefully you got better luck next time


that means that you will run AM3 dual cards under cascade for higher CPU clock

Deffinately yes......

[blind_ripper]

Yes ......sorry........BUT 115fps on GT1 of the 2k5.....Are we idiots or something?......



Deffinately yes......

to bad george , hope till there will be a rebench ?
now share those mods

[s7e9h3n]

Yes ......sorry........BUT 115fps on GT1 of the 2k5.....Are we idiots or something?......

Lol...I guess I am, cuz I have no idea what that really means

[boblemagnifique]

Excel overclocking, the GTX roxx very well under LN2 (974mhz Gpu is impressive)

OPB is a true god, no explanation is possible

[hipro5]

Lol...I guess I am, cuz I have no idea what that really means

http://service.futuremark.com/compare?3dm05=2654983

It means that at ONLY 5232MHz, the "GT1 - Return To Proxycon" is 115.9fps.......NO GO exept if you work your rams at 1600MHz (800MHz DDR) with Cas 2-2-2-2.......
.....not to talk for the 240fps of "GT3 - Canyon Flight".....Cards @ 1030MHz?....

[Gautam]

For me, stuff very seldom goes as planned regardless of chipset or setup.

That AM3 score is amazing though, congrats. Don't worry if you couldn't sink em all this round, you will next time.

You sure your not tweaking your memory enough??

[kemo]

http://service.futuremark.com/compare?3dm05=2654983

It means that at ONLY 5232MHz, the "GT1 - Return To Proxycon" is 115.9fps.......NO GO exept if you work your rams at 1600MHz (800MHz DDR) with Cas 2-2-2-2.......
.....not to talk for the 240fps of "GT3 - Canyon Flight".....Cards @ 1030MHz?....

i believe it can be done with 6V on the memory , may be higher

[hipro5]

i believe it can be done with 6V on the memory , may be higher

Here's a "clearer" photo of the cards by esdee......

http://img410.imageshack.us/img410/6342/DSC_5927.jpg

[G H Z]

Thats alot of wires you have there hipro

Nice AM3

[TiN_]

hipro5
Great work! Maybe the reason why memclock lowered with 1000+ GPU and bad results with SLI is PSU? That qc cpu took awesome wattage. which PSU do you use? And I see that you attached GTX'es with 4 wire connector. I would try to use PSU with 4 independent PCI-E cords .