Water Cooled Case Gallery

[sreedx2]

IanY ... I was wondering about that, thanks for the tip I will get that filled up

[Polizei]

I have seen a lot of people getting to 3.6GHz with less than 1.5v... they have different motherboards than I do. The Infinity 975X/G that I have was one of 5 or 6 that were avaliable when the Core2's were released in August, so I grabbed it knowing DFI could get me high clocks. I am very pleased with my first (and not my last) DFI board.

[ogOOr]

I've just finish my project (Zimne ogOOrki) Here are some photos:







Now I have to find some box for hdd. I think scythe quite drive will be good.

[Spawne32]

That is UV blue fluid xp, I also have some Pentosin G11 which I am going to try after this

ah ic you also have a crappy 6600 I am at 3.6ghz running 1.5875 Vcore

I dont understand, your calling a E6600 crappy? Yet your using fluid xp?

[coolmiester]

Coolermaster Wave Master - Blue
Tyan K8WE (S2895) Dual Opteron DDR400 SLI
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512MB OCZ DDR PC-3200 ECC Registered / Dual Channel
2x Sli Gainward 6800 Ultra Golden Samples
Enermax EG851-AX-VH 660W ATX2.0 SLi Compliant
Western Digital Raptor 36.7GB 10,000RPM SATA 8MB Cache
Pioneer DVR-109XLS 16 x 16 DVD±RW Dual Layer ReWriter

2x Danger Den TDX A64 Blocks
2x Danger Den NV-68 Blocks
Black Ice Extreme II
2x NoiseBlocker Fans on Nexus Controller
Danger Den Bay-Res
Modded Laing DDC Pump
Danger Den Hose

[sreedx2]

I dont understand, your calling a E6600 crappy? Yet your using fluid xp?

that is twice now everyone is taking me saying it is crappy the wrong way

what I mean is I just wish I could get more out of it without having such a high Vcore

I am new to water cooling, take it easy on me I did not realize fluid xp was so ty I do have some petosin G11 which I am going to make a mix of that should take my temps down a little

Coolermaster Wave Master - Blue
Tyan K8WE (S2895) Dual Opteron DDR400 SLI
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512MB OCZ DDR PC-3200 ECC Registered / Dual Channel
2x Sli Gainward 6800 Ultra Golden Samples
Enermax EG851-AX-VH 660W ATX2.0 SLi Compliant
Western Digital Raptor 36.7GB 10,000RPM SATA 8MB Cache
Pioneer DVR-109XLS 16 x 16 DVD±RW Dual Layer ReWriter

2x Danger Den TDX A64 Blocks
2x Danger Den NV-68 Blocks
Black Ice Extreme II
2x NoiseBlocker Fans on Nexus Controller
Danger Den Bay-Res
Modded Laing DDC Pump
Danger Den Hose

Nice I like your case

[Patriote]

Indeed! Great job on the Rig coolmiester!

[Spawne32]

that is twice now everyone is taking me saying it is crappy the wrong way

what I mean is I just wish I could get more out of it without having such a high Vcore

I am new to water cooling, take it easy on me I did not realize fluid xp was so ty I do have some petosin G11 which I am going to make a mix of that should take my temps down a little



Nice I like your case

ok lol you are forgiven for using fluid xp

[sreedx2]

I actually just mixed up some pentosin , I am going to get some of the pentosin with the UV die, should I be concerned about the UV die cloging or anything ?

[punisher69]

Any Suggestion's?

Thanks

[ANP !!!]

Nice looking Setup u got there Punisher

[quiet]

Nothing special... my first attempt. P180 is not radiator friendly but it came out nice





I don't use the cathodes since there is no case window, they are just for the pics

[lowfat]

coolmiester, that is truely just sick.

[coolmiester]

Paul/coolmiester,

I'm starting to wonder if you sold your soul to the Devil to be able to crank out all the incredible builds you do. I had a friend up yesterday showing her my new rig, and went thru your posts showing her your great work as an example of premium builds. Each one just blows me away more than the other, and I can't wait to see your next.

andyc

WOW strong praise indeed.

I just try to go for the minimalist look keeping everything clean and simple.

Cheers andyc and everyone for the positive feedback

[thunderstruck!]

Here's mine. Not as sick as coolmeister's. Next step is sleeving, routing & hiding all those wires & soundproofing (it's near silent now), but I might not get to that until may. Finally got metal barbs on the MCW-60 and a PA120.3. Btw, the fuzion completely rocks.

[[cTx] Nooc]

nice parts there thunderstruck

[dnb#]

redid my loop cause i've got a new pump (DD MAG II LE) just 2 pics let me hear your comments

[Pete]

Thats the sex, how ever keep your eye on the pump they die randomly, rapiedly, repatedly,

[dnb#]

does that pump die quickly? hope not, cause it's a great pump and the most silent I know....The pump is added to a fancontroller and running on the lowest stand

[Pete]

Yeah, the box it comes in makes for a good coffin for it!

Maric in the UK has boxs of dead ones is what he said.

[dnb#]

hhmm strange, but I'm not running it @ 12v but just a few V's i think 1/8 of his power cause the pump runs too fast for me when @ full....
I don't believe the pressure/flow stories for better temps...I just want a silent pc
and I don't think the pump dies quickly with power @ 1/8...

[Pete]

Ask the man himself but i've read countless issues all at stock...just keep eyes on it

[dnb#]

ok, I shall keep my eyes on, thanks for the info

[ramenchef]

Nice setup. What dye did you use to get such a nice green?

[Baron]

Nice setup. What dye did you use to get such a nice green?

Same question here.

Really nice setup, and the green colour is sweet.