ur temps are fine candymancan.
they are exactly the same on my watercooled chip 334x9@1.55v, although i also have two x1800´s in the same loop. AtiTool reads 40°C on the vidcards during an Orthos run.
ur temps are fine candymancan.
they are exactly the same on my watercooled chip 334x9@1.55v, although i also have two x1800´s in the same loop. AtiTool reads 40°C on the vidcards during an Orthos run.
MSI 790FX-GD70 (BIOS 1.D4)//PhenomII 1090T
2x 2GB G.Skill F3-12800CL7D-4GBRH//ASUS EAH5970
OCZ Agility 120GB//2x Hitachi Deskstar (2x500GB) RAID0//ZALMAN ZM850-HP 850W
DFI LanpartyUT RDX200 CF-DR (BIOS 12/23/05)//AMD Opteron 165 CCBBE 0616 XPMW 334x9 1.375Vx112%
2x 1024 MB G.SKILL F1-4000BIU2-2GBHV PC4000//2x Sapphire HD2900PRO(modded bios 845/950) 512mb CrossFire
2x WD Caviar RE2 WD4000YR (400 GB) RAID0//OCZ GameXStream 700W
Motorola Milestone CyanogenMOD 6.1.0 RC0 Android2.2.1
Running 246x11 @ 1.53v on my Opty I get 32/46 on CoreTemp. ASUS Probe II shows 40°C, ambient 21°C - see sig ...Originally Posted by CandymanCan
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
I have my rig stable at 2880@stock volts.
I was taking a screen capture and I noticed that cpu-z was showing my 165 as a toledo. Is this A bug with cpu-z? I am not an expert overclocker I think that I need to start tweaking my ram and see if I can get some better timings. Anyhelp would be great.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
1,36v is for 1,4v in bios when set manually, real stock voltage imho is when it's set to Auto and it's about 1,29-32v in cpu-z ^^
edit: I havn't read your sig, you've asus. I'm talking about DFI nf4 D ...
Last edited by Sonic9; 03-01-2007 at 02:48 PM.
Asus P5E@Rampage / Q9550 c1 @460x8.5@1,320v / Noctua NH-U12P / 2Gb x 2 OCZ Flex PC-9200@1105Mhz / Radeon4850 / OdinGT 550w
past
DFI nF4 Ultra / Opty170 CCBBE 0617 FPMW @ 2,7Ghz / XP-90 / 2x1Gb CellShock PC4000 / GF 7800GT / Enermax 460W
Well I guess add LCB9E to the list of 'don't get if you want to hit 2.8'. The highest I can manage is 2.736 @ 1.425V in bios. It doesn't like anymore voltage even though it runs cool as can be. I can't even load into windows above 2.75 ghz.Oh well, still a great processor so I'll be keeping her.
AMD Opteron 165 @ 2.736ghz, 1.425V - LCB9E 0636
2x1GB G.Skill HV DDR500 RAM
DFI NF4 LP UT
eVGA 7800GTX @ 530/1400
2x80GB Hitachi 7200RPM in Raid 0
Lian-Li PC-v1000
Water Cooled w/ Swiftech (CPU & GPU)
I was just wondering, if you guys having trouble overclocking have C&Q shut off?
don't include all LCB9E because yours tops there.Here's mine at 2.8 with 1.4
and for 24/7 at 2.9 1.525 with watercooling of course..
24/724/7
The LCBQE is the new trend...ive got 0702WPMW....nothing special (Opty180,sold the 175 CCBWE..)...right now iam at 250x11.5=2875MHz with 1.425 Vcore..keep trying..keep burnin in ..don't include all LCB9E because yours tops there.Here's mine at 2.8 with 1.4
and for 24/7 at 2.9 1.525 with watercooling of course..
[OFFTOPIC]Ε παντερμη Κρητη....εβιβα χωριανακι..[/OFFTOPIC]
Workstation
P5E3 Deluxe
Q9650 @4.0GHz (L826A974)
Intel X25-M 80Gb(Win7 x64)-Samsung MLC64 -WD500
8Gb Crucial Value D9JNM
GTX 260& Eizo L768
CobaNitrox 600w
WC (Laing DDC1T-Enzotech cpublock-B/Ice Stealth 360)
TT Armor
why 11.5?..are you there with aircooling?and congrats for your new cpu
[OFFTOPIC] ..εβίβα! [/OFFTOPIC]
24/7
I knew it..finally 2007 939 Opteron chips are showing up. Hopefully we'll be seeing some amazing proc's with darn good refined mem controllers and processes.
Or...they will use all the crappy chips for the 939 since there is obviously a lot less emphasis on it(lowest priority for AMD).
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
hi there, where on earth did you get those 2007 edition opterons, just curious.. ?
DFI LP NF4 Ultra-D (704-2BTA)|| AMD X2 3800+ @2800mhz || 2x1024MB PDP ELK DDR500 UCCC || 160GB Hitachi SATA || NEC 3540A || ATI Radeon X300SE 128mb PCI-E || Silverstone ST60F 600W
Cathar G4 || BIGTS240 w/Yate Loons || MCP655
Checkout XtremeCooler Systems webstore to buy stuff if you're from Asia-Pacific or anywhere else in the world.
@DevilCry thanks man!
I prefer this multiplier becouse my mobo then change the divider to 180:200 so my ram run now a little over the 200 stock..otherwise i should go to 3GHz to have the ram run at stock speed..(Asus dont have this divider in bios settings..)
@xforce
I bought this in Europe-Greece and i know also from other forum that in Germany they offer right now the same steppings....
Workstation
P5E3 Deluxe
Q9650 @4.0GHz (L826A974)
Intel X25-M 80Gb(Win7 x64)-Samsung MLC64 -WD500
8Gb Crucial Value D9JNM
GTX 260& Eizo L768
CobaNitrox 600w
WC (Laing DDC1T-Enzotech cpublock-B/Ice Stealth 360)
TT Armor
Simply,no IHSSeriusly how are you freaks running you temps so low ??? Im using 1.52v granted its alot higher then your 1.4v im see'ing people use, but my Core temp readings are in the lower 60c's when running orthos and im on water .....
Perhaps its time to buy a new pump and block or something but seriusly... The only way i can get my core temp to reach in the 40's like some of people is if i put my pump in water with tons of ice and unplug a hose to suck that cold water in. Then my block and hose's and even the socket from the touch are cold.... yet you people who claim to be on regualr water are getting readings the same as my chilled water ??
Or are you guys running chilled water systems to get these temps ?
My MBM5 readings are saying like 30c load when chilled , when it isnt chilled just normal they read around 46c load which is what im see'ing some of your "CORE TEMP" readings. How are some of you getting core temp to read the same temp as ITE smart gardian also like some the pics iv seen youre core temp and normal temp readings are the same
That or i have a reading problem cuss for me core temp always seems to read like 10-20c warmer then mbm5 or ITE smart guardian... Here isa pic of the normal water no chilled temps....
DFI LP NF4 Ultra-D /704-2BTA
AMD Opteron 148 CABYE 0543 FPMW/3Ghz1.45 Vcore
AMD Opteron 165 CCBBE 0617 FPMW/3Ghz1.5V...testing
2 x 1GB OCZ Platinum Edition EB PC4000
Gainward 7800 GTX
2 x Samsung SATA II 80GB Raid 0
Samsung Spinpoint P120 250GB SATA II
Pioneer 109bk
Plextor TA 48/24/48
Tagan 530w U22 2force
Antec Plusview 1000AMG
A friend of mine just received a OPTY 170, his stepping is LCB9E 0651MPMW
I haven't seen this stepping before, anyone else got some input on this stepping ?
Moore's Law has been replaced by "Paul's Paradox": the number of canceled products per year at Intel will double every year after the introduction of the AMD Opteron™ processor.
From www.komplett.com?
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Not exactly, but the webshop he used has the same parts deliverer as komplett i believe.. So should be the same...
Moore's Law has been replaced by "Paul's Paradox": the number of canceled products per year at Intel will double every year after the introduction of the AMD Opteron™ processor.
Any idea how its clocks? As I'm about to buy a 170 from Komplett
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Will know more how it clocks within the next 12 hours...
Moore's Law has been replaced by "Paul's Paradox": the number of canceled products per year at Intel will double every year after the introduction of the AMD Opteron™ processor.
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Any idea how its clocks? As I'm about to buy a 170 from Komplett
From what I've seen around the LCB9E stepping has been sort of inconsistent. I've heard them as high as 2900 and as low as 2500's, with varying voltages but nothing to brag about.
Hope you get one of the better ones.
-Cpu:Opteron 170 LCBQE 0722RPBW(2.87ghz @ 1.300v)
(retired)Opteron 146 (939) CAB2E 0540
-Heatsink: Thermalright XP-90
-Fan:120mm Yate Loon 1650 RPM @ 12V, 70.5 CFM, 33dB
-Motherboard: DFI Lanparty nF4 UT Ultra-D
-Ram: Mushkin High Performance blue, 2gigs(2X1gig kit) PC3200 991434
-Hard drive: Seagate 400GB Barracuda SATA HD 7200.10(AS noisey model)
-Video card: evga 6800GS @520/1170
-Case: P180
-PSU:Enermax 535Watt EG565P-VE FMA (24P)
only one and it apperantly doesn't overclock, but don't take my word for it tell your friend to give it some juice and find out for himself.
DFI Venus #0200 04/06/2006___Opty 165 CCBBE 0617FPMW @ 350x9 3150Mhz 1.55v
3x 400G Seagate Barracuda SATA 3.0Gb/s 7200.9K ____ WD RaptorX 150G 10K
2x1G Mushkin XP Redline 3-3-2-6 @ 262MHz 2.71v___EVGA 7950X2 01G-P2-N592-BX
Cooling by: Storm Rev2, MCP655 Pump, MCR320 RAD ___Powered by: OCZ Game X Stream 700W
Come on post the clocking
ASUS P5K-E/WIFI-AP, Q6600 @ 3.4GHz 1.3v, Tuniq Tower 120, 4Gb OCZ PC2 8500 Reaper HPC, Asus HD5870, 320Gb Seagate 7200.10 SATAII, 500Gb Sammy F1, NEC ND4550A DVD burner, Corsair TX 750w PSU, Antec P182.
Anyone seen this stepping: ccbbe 0615mpmw ? Is it aty stepping or is it the rest of my hardware thats stopping me?
My 185 is a CCBBE 0613MPMW and it does 3Ghz on stock voltages. Granted it starts at 2.6Ghz stock, but it seems ours were just maufactured at different times.Anyone seen this stepping: ccbbe 0615mpmw ? Is it a
Core 2 Quad Q6600 @ 3.2 ghz | Gigabyte EP45-DS3L | TuniQ Tower 120 | 4gb Corsair DDR2 6400 | XFX GTX 285 "Black Edition" | XiFi - Extreme
750 Watt PC Power and Cooling "Silencer" | Antec Ninehundred case | Saitek Eclipse keyboard |Acer AL2416W 24" HD LCD
[My Heatware]
[Check this out!]
I got that stepping too, and it suxxAnyone seen this stepping: ccbbe 0615mpmw ? Is it a
2,6 ghZ with 1,4 volts
AMD Opteron 165 (0615 DPMW) 1800 @ 2831 MHz with 1,4 v | Asus A8N-SLi Deluxe| eVGA 8800 GT "Vanilla" @ 700/1728/1000 | 2x1gb G.skill 2GBZX | FSP Epsilon 700W | 760 GB Harddrive-space
Posting Permissions
Reply With Quote
Bookmarks