Today was the birth of my new SLI aluminium pots
Here are the pictures of fabrication (it took 5 hours to make them)
I started of with aluminium block 7x7cm and 45cm long..
First i had to cut them to lenght (21cm)
Raw material compared to alredy made copper Zbogi`s container.
Then The real fabrication began.
Machined down to 54x54x200mm
Some more work
Alomost there
And finished pots only need to do the fine finish and lap them + need to fabricate mountig...
well thats it comments welcome
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
Nice work my friendDo you already have mounting for it and issulation?
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Very nicely done
Why did you choose aluminum pots instead of copper?
Wolfdale e8400es @4.5Ghz / Ultra-120 Extreme
2GB Ballistix @ 589Mhz 4-4-4-x @ 2.5V - SPI 32M
*** Motherboards tested: DFI Blood Iron (current), Asus P5K3-dlx, DFI P965-S, P5B-Dlx, DFI RD600, Bad Axe 2, EVGA 680i, DS3 and P5W DH ***
Fan modded Zippy 850W, 500GB 7200.11 and EVGA 8800GTX @678/1062
Price.
If you have a cooling question or concern feel free to contact me.
Ah, trueOriginally Posted by n00b 0f l337
Wolfdale e8400es @4.5Ghz / Ultra-120 Extreme
2GB Ballistix @ 589Mhz 4-4-4-x @ 2.5V - SPI 32M
*** Motherboards tested: DFI Blood Iron (current), Asus P5K3-dlx, DFI P965-S, P5B-Dlx, DFI RD600, Bad Axe 2, EVGA 680i, DS3 and P5W DH ***
Fan modded Zippy 850W, 500GB 7200.11 and EVGA 8800GTX @678/1062
thx guys
I took aluminium over copper because the price for copper is just insane over here...
I will probably stop by a store today to get some aluminium 4mm thick plates for mounting + get some water sand paper grit 600-1200 and some polish paste so i can finish them.
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
I'll like them!
Nice work
Have a nice day
QX9650 ES - 1M @7,984 sec - Asus Maximus Formula SE - LN2
E6600 - 1M @9,937 sec - Asus Maximus Formula SE - LN2
E6600 - 1M @10,016 sec - LN2
E6600 @ 4100mhz AIR -1M 12,500sec
E6600 @ 4285mhz AIR validation
OCZ PC8000 @ 684mhz 5-5-5-15 1M
http://www.overklokken.info --> THE dutch overclocking website.
Results after 1 hour of wet sanding and polishing.
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
Ohoho nice, you have too much time
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
lookin nice shark-357.
Great work
FOLD for XS WCG ; or Rodzilla kills a kitten
Great job..
![Send a message via AIM to [cTx]Philosophy](images/misc/im_aim.gif)
Nice indead, Lets see some results from them now, is it that big of a diff from copper to alu as far as temps are concerned, I was thining maybe 2-5 most maybe, or am i way off..
Join the XS WCG team and do your part to help save the world..
^^^Click here to start folding for the soon to be number one team in the world..^^^
Main rig: Gigabyte DS3/6300@3.2 7950 GX2/Server:Expert/165@2.9/PCI vid/Wifes:ASrock Dual SATA2/3800@2.4/X800XTAIW/Kids:165@2.7/X850XTPE
"A computer beat me in chess, but it was no match when it came to kickboxing"
-Emo Philips
All that hours of polishing won't even be seen after a few times using them
And you insulate the tubes?
Like LD saids, to mutch time ^^
Back in the phase change world
Thx for all the kind words guys really appreciaded
I will post results with DICE on monday or thursday when i complete the mounting for these two babys and then we will see how they perform towards zbogi`s copper pots and i`ll decide if i will be making a few more, since a got a few PM`s.
About polishing im a perfectionist wether it`s about case modding, voltmoding, girls
Last edited by Shark-357; 02-10-2007 at 01:48 PM.
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
One picture for laughs
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
Nice containers
Nice little test there in the last picture... cascade evap by the looks of things
hehe really nice shark
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Looking good!!
Looking forward to the results.
Who won the showdown? Very nice pots by the way, would love to have those kind of skills and machinery some day.One picture for laughs
GJ shark, guys u now see what doing LD's compresors...
OC-Lab is no more...
Tnx for your support and so long!
R.I.P. www.oc-lab.com 18.02.2007
made by tiborrr...and that is true...
I did a litlle test on friday and the results were quite good
Last edited by Shark-357; 02-18-2007 at 08:53 AM.
i7 980x @ 4500Mhz 1.45V
Rampage III Extreme
6GB A-Data 1866Mhz+
2x XFX 6970
Crucial SSD 128GB M225
X-Fi Titanium Fatal1ty
Corsair HX1000W
GSX-R 750 Rider
Really nice my friend
regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Nice Works
How would it be, if you turn a thread into the Cooler to make the area bigger.
Thatīs what I want to do because the idear is simple.
..........still building Coolerīs...........
good job
Posting Permissions
Reply With Quote
Bookmarks