E6850 and QX6700 on DFI INFINITY Intel P965 Test

[AndreYang]

I received New BIOS from Oskar Wu. The BIOS is perfect for E6850, Conroes and Kentsfield.

Oskar already solved High Voltage DRAM problem.

I think the mobo will be available in few weeks.


INFINITY Pics







E6850 FSB 500 ORTHOS Test



QX6700 FSB 400 ORTHOS*2 Test

[PanteraGSTK]

Got any superPI times?

[eva2000]

nice.. what was the high vdimm issue ?

[lowfat]

i want this board....i guess i can wait two weeks.

[metro.cl]

this cpus just keep getting better and better

good to see DFI with a real overclocker

[AndreYang]

Got any superPI times?

3.5G Super PI 32M

It's fast?

[AndreYang]

nice.. what was the high vdimm issue ?

I didn't try high voltage yet.

[PanteraGSTK]

This board is making me rethink my asus p5ne-sli 650i choice. This board is on the 1066 strap isn't it? If you could, I'd like to see max memory OC with decent timings. The quaGT tops out at 1130mhz or something like that, and I'd like to see 1250mhz. That factor and the price will make my choice.

[AndreYang]

This board is making me rethink my asus p5ne-sli 650i choice. This board is on the 1066 strap isn't it? If you could, I'd like to see max memory OC with decent timings. The quaGT tops out at 1130mhz or something like that, and I'd like to see 1250mhz. That factor and the price will make my choice.

This mobo is 1066 strap for sure. I will test high memory mhz in few days.


Andre

[LittleDevil]

I really like that mobo, what is the highest FSB for superPI?

Regards

[AndreYang]

I really like that mobo, what is the highest FSB for superPI?

Regards

Maybe you didn't like super pi if you saw this pic.

[PanteraGSTK]

.......I'm speechless...548.9fsb??? I must be dreaming. I know I keep asking a lot, but you wouldn't happen to have an e6300 or e6400 laying around would you? I would LOVE to see that fsb on either of those chips. Other than that, What is the max memory frequency at 5-5-5-15, and 4-4-4-12. I see you got at least 549mhz out of the memory at 4-4-4-12 so I'm drooling at the thought of what the result will be.

[LittleDevil]

Really impressive and without any mods, is it NB stock cooled?

regards

[AndreYang]

Really impressive and without any mods, is it NB stock cooled?

regards

No mod anything. NB is stock cooler.

[Misko]

Very impressive, but on the other hand we already saw Asus P5B-E doing 590 orthos.

[ziddey]

damn man. 500fsb with 1.25vmch and 1.19vtt. that's wild. just wild. I have a feeling I'll be ditching the p5b vanilla that I don't even have yet for this when this comes out.

Also, it's interesting the qx6700 gets reported properly by orthos when you lower the multi. Is it like that across the board with that chip? Like system properties etc. Also, why a higher vtt in that one for 400fsb?

nicely done

[PanteraGSTK]

Very impressive, but on the other hand we already saw Asus P5B-E doing 590 orthos.

Yea, but this is on air I believe. Means more to me since I too am on just air.

[ziddey]

the infinity did 500fsb with just 1.25vmch though. that's astounding. astounding.

[Coroner Kyle]

What's the max stable speed with Kentsfield? Also what's the max stable speed while using the highest possible FSB?

[PanteraGSTK]

the infinity did 500fsb with just 1.25vmch though. that's astounding. astounding.

I may have to get this and a 650i based board. That will depend on the price. Amazing results so far.

[AndreYang]

damn man. 500fsb with 1.25vmch and 1.19vtt. that's wild. just wild. I have a feeling I'll be ditching the p5b vanilla that I don't even have yet for this when this comes out.

Also, it's interesting the qx6700 gets reported properly by orthos when you lower the multi. Is it like that across the board with that chip? Like system properties etc. Also, why a higher vtt in that one for 400fsb?

nicely done

kentsfield need some VTT voltage, especially high fsb.

I use 8X because of this kentsfield is unstable on 3.6G.

[blame]

I'd like to see some e6400/e6300 tests too if it's possible. Quadgt seemed to like e6600 better than e6400/e6300 according to bingo13 ->http://www.xtremesystems.org/forums/...&postcount=162

[Booj]

I too would like to see some results with a E6300/6400. People are more likely to be running those than expensive quads at this time.

[Atom]

My last noob question and any questions after this on xs is gonna be intelligentlearnt a lot in a little time

Question:what cooling this you use with the qx6700?
i'm sorry but i dont see it since your sig isn't visible
thanks

[AndreYang]

My last noob question and any questions after this on xs is gonna be intelligentlearnt a lot in a little time

Question:what cooling this you use with the qx6700?
i'm sorry but i dont see it since your sig isn't visible
thanks

I only have air cooler Tower 120.