Conroe Overclock Database

[AndyM]

User Name: AndyM
Stability: Orthos 9+ hours

CPU name: E6600
OC: 3.6 GHz
Stepping: 6 B2
Week: L627
Code: B155
Vcore: 1.3875 (bios)

Cooling: Air
Cooler brand/model: Tuniq Tower

Motherboard: Bad Axe 2
Bios Version: 2507
Operating System: XP 32

RAM brand: Corsair
RAM rated speed: PC6400
RAM actual speed: 800DDR2
Latency: 4-4-4-12

[burn what?]

That happens verywhere CPU cant be truested hey doesnt gigabyte have any monitoring software? For us Asus motherboard users we use AI suite or PC probe.

Orthos is multithreaded so you dont need to start 2 of them unless you have 4 cores

i know, but i tried downloading orthos and couldn't get to run. no setup.exe, couldn't figure out. didn't spend much time on it cause just went to prime95, but i'll try again. gigabyte has a tuning software but it messed up my shutdowns (at least i blame it) with a few other quirks so don't like to install it. i like my systems as clean as possible. can't find any other freeware to show voltages that seem in regular use.

so say i can get to 3.8 using software but only 3.6 or 3.7 in bios, can i use the 3.8 via software to make the list?

[GrimReaper]

My only question is why priority 9 isnt a requirement. I think most of us run orthos at priority 9 so it shouldnt be an issue.

priority 9 really slows down the whole pc to a state where you cant use it during the run

burn what
you could try Speed fan or motherboard monitor ,, not sure if it will still work on newer boards

Anything as long as its orthos/Prime stable for 8 hours or more and it should still be running in the pic

Orthos is really very simlple
http://www.techpowerup.com/downloads/385/mirrors.php
Its a .Cab file just extract the files and run the Exe
If you still cant then I will upload a Zip file for you


come on guys keep the results coming

[burn what?]

priority 9 really slows down the whole pc to a state where you cant use it during the run

burn what
you could try Speed fan or motherboard monitor ,, not sure if it will still work on newer boards

Anything as long as its orthos/Prime stable for 8 hours or more and it should still be running in the pic

Orthos is really very simlple
http://www.techpowerup.com/downloads/385/mirrors.php
Its a .Cab file just extract the files and run the Exe
If you still cant then I will upload a Zip file for you


come on guys keep the results coming

the only thing about having prime running is that it doesn't show you how long it's been running for. you have to stop it to show how long running and no errors

[GrimReaper]

try that orthos link I gave! if it doesnt work I will upload a zip for ya

[The Nemesis]

the only thing about having prime running is that it doesn't show you how long it's been running for. you have to stop it to show how long running and no errors

True in a way, but the top box shows start time and the other boxes show last pass time. Pretty simple to determine how long its been running with that info. For overnight runs, I typically start at midnight & shut stop @ noon to make it easy.

[burn what?]

here is a screenie of the prime i'm using, while running no indication of time or anything. i have to stop it to show results. maybe i dl'd an old version. wouldn't surprise me as the orthos i downloaded was nothing like what you just linked for me grim. thanks for that. don't know what the hell i had???!

so grim, why did ya leave me out of the spreadsheet? i'm on page 7 ya know. was it cause my crappy pic? also on page 7 a few guys have 2 windows of prime running at same time. thats what i can't figure out how to do.

[paulxmn]

User Name: paulxmn
Stability: Orthos 9Hours+

CPU name : E6600
OC: : 3200
Stepping: : 6 B2
Week: : L633
Code: BX8055
Vcore: 1.392

Cooling: Air
Cooler brand/model: Thermalright SI 128 NB Thermalright NB-1

Motherboard: DFI Infinity 975X/G
Bios Version: 12/06
Operating System: XP2 32

RAM brand: Crucial Ballistix LEDDDR2 PC2-6400 DDR2-800 • 2.2V
RAM rated speed: PC6400
RAM actual speed: 711
Latency: 4-4-4-12




NO AD LINKS

3D Mark01

3D Mark 03

3D Mark 06

Chipset

[Donkers]

User name: Donkers
Stability: Orthos 8 hrs +

CPU name: E6300
OC: 3640 mhz
Stepping: 6 B2
Week: L632
Code: B422
Vcore: 1.52

Cooling: Air
Cooler brand/model: Sunbeam Tuniq Tower 120

Motherboard: Asus P5B Deluxe Wifi
Bios Version: 0614

RAM brand: OCZ
RAM rated speed: PC6400
RAM actual speed: 1040
Latency: 5-4-5-15

Powered by Enermax Liberty 500w

[Donkers]

BTW, OS for above is XP 32. Sorry.

[Zeus]

here is a screenie of the prime i'm using, while running no indication of time or anything. i have to stop it to show results. maybe i dl'd an old version. wouldn't surprise me as the orthos i downloaded was nothing like what you just linked for me grim. thanks for that. don't know what the hell i had???!

so grim, why did ya leave me out of the spreadsheet? i'm on page 7 ya know. was it cause my crappy pic? also on page 7 a few guys have 2 windows of prime running at same time. thats what i can't figure out how to do.

Open taskmanager and let it show processes, it will show running time.

[Nemon]

Stability: Orthos 8.5 hrs

CPU name: Xeon 3060
OC: 3420 mhz
Stepping: 6 B2
Week: L631
Code: B115
Vcore: 1.275

Cooling: Air
Cooler brand/model: Thermalright ultra-120

Motherboard: Asus Striker Extreme
Bios Version: 0701
OS: Win XP PRO

RAM brand: Corsair
RAM rated speed: PC6400
RAM actual speed: 900
Latency: 5-5-5-23

Powered by PC Power & Cooling 750w

[burn what?]

Open taskmanager and let it show processes, it will show running time.

not a prob now, the orthos link grim gave me works fine.

[clee]

User name: CLEE
Stability: Orthos 24 hrs +

CPU name: E6600
OC: 3780 mhz
Stepping: 6 B2
Week: L632
Code: B168
Vcore: 1.5125

Cooling: H2O
Cooler brand/model: Apogee + Thermalchill PA 120.2

Motherboard: Asus P5WDH Dlx
Bios Version:1707

RAM brand: Mushkin Redline
RAM rated speed: PC8000
RAM actual speed: 840
Latency: 4-4-3-4 @ 2.1v

PSU: Seasonic S12 600W

CPUZ validation:
http://valid.x86-secret.com/show_oc.php?id=165478

[krat]

clee, what are the other voltage settings?

FSB:
MCH:
ICH:

[p0tter]

Found my full stepping, thanks for the add Grim

CPU e6400
OC: 3600
Week L628
Code: B191

[JohnnyV]

In an attempt to aquire a good stepping and try to drive as many webshops crazy I've been e-mailing around trying to find a good one.

Results so far:

- L639F020
- L637A874
- L634A832
- L629B380 (but they may be bullting me)
- L632Bxxx

I've googled around and it seems the best choice is the 29B then the 32B right? I can't find much about the top3 ones.

What do you guys think... I have to decide by the end of this day

[Malk4vi4n]

User Name: Malk4vi4n
Stability: Orthos 8+

CPU name: E6400
OC: 3240 MHz
Stepping: 6 B2
Week: L629
Code: Can I update later with the code?
Vcore: 1.3125 @ bios

Cooling: Air
Cooler brand/model: Thermaltake Big Typhoon

Motherboard: Asus P5WDH Deluxe
Bios Version: 1707
Operating System: XP 32
RAM brand: Kingston
RAM rated speed: PC5300
RAM actual speed: 810
Latency: 5-5-5-15 (still working on that)
vDimm: 2.15v
vMCH: 1.65
vFSB: 1.4


There ya go, a preety much self-explaining screenshot:

[clee]

clee, what are the other voltage settings?

FSB:
MCH:
ICH:

1.3v, 1.65v and auto; respectively

...there is a definite physical difference between them, and B's are better. i'm not saying that A's are terrible or not worth oc'ing, i'm just saying the B's are better in speed and vcore, and as a result temps.

You saying "B" chip gives better temperature with equivalent clock speed/ vcore ? Sorry I bet to differ.
I had a wk 27 "A" chip that could do 3.6Ghz but required 1.575v, yet the temp was just hovering around mid 50c.
My newer "B" chip above only needs 1.5125 to hit higer clock but it's already 10C hotter.

fyi. screenshot of my older "A" chip:
http://img02.picoodle.com/img/img02/...3m_abf0681.jpg

[MrDeeds]

@Grim
Your right, i didnt think about that.

One other thing though, how about asking people to have task manager open when they take their screen. It isnt an issue with people running orthos but some versions of prime95 and sp2004 dont provide a full load on both cores even if you set the affinity correctly and have dual instances open.

Thats just something i've noticed. Great work with the database also.

[afireinside]

User Name: afireinside
Stability: 13 hour small ftt

CPU name: 3060 xeon
OC: 3825mhz
Stepping: 6 B2
Week: L630
Code: A986
Vcore: 1.5v

Cooling: water
Cooler brand/model: dtek fuzion

Motherboard: xbx2
Bios Version: 2507
Operating System: xp pro sp2 32 bit

RAM brand: gskill
RAM rated speed: pc6400
RAM actual speed: 425mhz (ddr850)
Latency: 4-4-4-8

[krat]

User Name: krat
Stability: (8hours+ , orthos)

CPU name: (E6600)
OC: (3150MHz)
Stepping: (6 B2)
Week: (L632)
Code: (A734)
Vcore: (1.35)
Cooling: (Water)
Cooler brand/model: (BigwaterSE)

Motherboard: (Asus P5W-DH-DELUXE)
Bios Version: (1901)
Operating System: (XP 32)

RAM brand: (Corsair)
RAM rated speed: (PC2-6400)
RAM actual speed: (1:1)
Latency: (5-5-5-12)
vRAM: (1.95)
http://valid.x86-secret.com/show_oc?id=168925

MCH: (1.65)
vCore BIOS: (1.3825)

[sparkY1000]

Are there any E4300 overclocks yet?? I have a Q640 and I would like to know if its gonna be good? I wont have chance to test it until I can get my DS3 BIOS updated next week

[Ruslan]

User Name: Ruslan
Stability: 21+ Hours Orthos Blend And 9+ Hours Of Small
CPU name E6400
OC: 3200Mhz
Stepping: 6 B2
Week: L632
Code: A932
Vcore: 1.325

Cooling: Air
Cooler brand/model: ZALMAN CNPS9500 AT 2

Motherboard: Abit AB9 QuadGT
Bios Version: V1.1 Beta 2 - 01/19/2007
Operating System: XP 32

RAM brand: CORSAIR
RAM rated speed: DDR2 800 (PC2 6400)
RAM actual speed: 800
Latency: 4-4-4-12

[Pt1t]

User Name: Pt1t
Stability: OCCT
CPU name Xeon 3060
OC: 3906mhz
Stepping: 6 B2
Week: L631
Code: B
Vcore: 1.5v

Cooling: Water
Cooler brand/model: Homemade

Motherboard: P5B deluxe
Bios Version: 1004
Operating System: XP 32

RAM brand: Kingston
RAM rated speed: DDR2 PC 8500
RAM actual speed: 1:1
Latency: 3-3-3-4