Quote Originally Posted by Kinc
Yes, the best way to do it is SLI. Im sure the card has more in it, alot actually since im only holding -78C loaded with the cascade. -100 with a pot would give an extra headroom for sure. Wont do dual gpu-pot until dreamhack though cause I need the ln2 to test these x6800 and then I also have three qx6700 to test on asus striker and evga 680i boards. Im going to start testing the others 8800GTXs to find a match for the one I use now tomorrow. Will use a -100 cpu cascade on it. Could be some nice clocks acually.

BTW I found a coldbug on this card. -80 on stock voltage will artifact at post. Raising the voltage eliminates that problem though.



I will as soon as I start testing QX6700


If I have ln2 left at the end of the weekend I will push the card to its limits on ln2. Yes I have fixed the ovp problem on he p5w64 now so will be able to push it harder. The latest X6800 I tested didnt like colder then -115C though, one left to try. I thinnk the one I used for 90k can do 5.2 atleast on 1.8V+

I think you will find that you can do around -145 on the P5W64 mobo.. I have been testing two B1's and a 6700 B1 on this board now... and i can do -145 on it as a max. It really rocks at around 135-140.. I have to have a little range, due to the lack of mass in my mousepot rev 1... I really varies in temps.. and I have to be super careful with the administration of the LN2..
Getting a new one from Vince shortly... That should take care of some of the problems..
The P5W64 board might very well be the nicest OC board I have ever had my hands on..
A good x6800 you should be able to do 01 @ 5,3-5,4GHz.. more if you are lucky..
I also saw the cold bug the other day... but like yours.. mine was also gone with raising the voltages..

BTW... how many 8800gtx's do you really have?