Another E6300 100 % OCed under AIR...

[stummerwinter]

Finally, after doing the VDimm-Mod because of my bad Microns I got 101,6 % under AIR...

CPU: E6300 @ 3,75 GHz with 1,45 V

Cooling: Thermaltake Big Typhoon

Board: Asus P5B Deluxe (BIOS: 0711) with VDimm-Mod (Thanx to Hikookie )

RAM: 2 x 512 MB Muskins XP2 PC6400 @ 5-4-4-15 with 2,75 V

http://valid.x86-secret.com/show_oc?id=130327

DICE will come soon...

[Fr3ak]

Nice one That NB fan placement looks somehow odd hehe
Is that the max you can get out of the board? 1.45V vcore aint much tbh

[hot_fifty]

didnt you use the 8 phase power port.. hmm is it better without the last 4 pins?

[Falkentyne]

didnt you use the 8 phase power port.. hmm is it better without the last 4 pins?

What are you talking about ?

What last 4 pins? What 8 phase power port?

CPUs won't boot without the 4 pin PSU connector.....

[stummerwinter]

@fr3ak: max is about 1,7 V - enough to do a DICE-shot

@hot: I use only the 4-pin connector, works good, System is 500x7 rockstable...

[Falkentyne]

Stummer:
can you please explain what the other poster is talking about?

Thanks.

[Fr3ak]

On the bottom left you can see that the board has 8phase power, but only a stuwi olny uses a 4pin connector instead of a 8pin one.

[deathman20]

Take that cover off the NB it will help with the cooling of it. And if you haven't replace the thermal paste under there.

BTW Nice OC

[oysfaerg]

Which batch is this? L62X A or B?

[largon]

didnt you use the 8 phase power port.. hmm is it better without the last 4 pins?

On the bottom left you can see that the board has 8phase power, but only a stuwi olny uses a 4pin connector instead of a 8pin one.

Eh?

I'm not sure why would you folks think 8pin EATX12V means a board has 8 phase PWM or that 4pins = 4 phase?

P5B Deluxe is 8 phase no matter how many EATX12V connectors you plug into it...

[deathman20]

Eh?

I'm not sure why would you folks think 8pin EATX12V means a board has 8 phase PWM or that 4pins = 4 phase?

P5B Deluxe is 8 phase no matter how many EATX12V connectors you plug into it...

Yup just like the P5W-Deluxe is 8 phase as well and only has 1 4-pin connector.

I personally didn't hook the second cable up until someone said try it. I truely haven't noticed a difference at all on stability or overclockability. I might just disconnect it so I can clean cables up going that way.

[RichUK]

The extra 4 pins were originally designed for dual socket Intel boards, to thus balance the current draw over 8 cables instead of four.

Lol, it has nothing to do with 8 phase power.

[catscit]

8 phase power has 8 mosfets for voltage regulation of the power going into the board.

4 or 8 pin power supply has nothing to do with it!

[stummerwinter]

@oysfaerg: It is a L626A...

Nothing special...

@deathman20: god idea...

The problem is, I need new RAM badly, CPU is not really the limit...

[splat00n]

how stable is this beast?

[HamidFULL]

Nice please tell me your idle and load temp with TAT or CoreTemp

[stummerwinter]

With air-cooling, but I think there is room to improve @ 500x7...

IHS is polished...

450x7@1,30 V (BIOS) with SETI/Einstein:



500x7@1,40 V (BIOS) with SETI/Einstein:

[CaNNibaL]

Nice job mate !

[HamidFULL]

but real Max temp become clear with TAT can u tell us Max temp with 2 thread of TAT

[deathman20]

but real Max temp become clear with TAT can u tell us Max temp with 2 thread of TAT

I'd love to know a program that uses the CPU that much. Hottest program I found was Orthos, and that reads over 3-4C warmer then other programs use underload.

Thats ~80% loaded with TAT (of course may vary slightly from system to system). If an actual program besides a stress tester can actually put that much heat off of the CPU as TAT does under load show me I'd love to try it, let alone wonder what it is.