new evap séries on test, Ricky/sl4ck

[|RickY|]

hi my friend sl4ck that lives in my city has a lathe on his house so we meet in order to try to make my dream evap, here is the diagram, is like the other i made, but with very more area of contact:



but it's ing hard to make it on a lathe... here is were we stop:



well, experimenting the lathe we saw steep by steem is more easy to make, but honestly the thig i dont like on this evaps is how heat is transfered by the center cilinder, i prefere maze styles why dont mix the 2?? .

thinking how to get more area of contact and how to cool better the central cilinder i think on somthing like this:



liquid goes steep by steep but on 1st's steeps it is forced to run inside the central cilinder cooling, making more area and removint the heat more directly from cpu, like on a maze



here is 1st night of steep by steep evap, only need to make the holes on central cilinder .










last pic is kidding with blaster becouse of cigarrets using imitation of marlboro cigarrets, but it is good to see how small is the evap, it will fit an vapochill ls kit. using 2mm for each steep that is more than enough to get good contact.




it will be tested soon and we will make some with diferent sizes and get the best size/desighn.

what do you think about it? let's make bet's about performançe! lol

regards, ricky

[trance565]

looks good to me, but im just getting into it lol, looks like it will work really well

[Ssilencer]

last pic is kidding with blaster becouse of cigarrets using imitation of marlboro cigarrets, but it is good to see how small is the evap, it will fit an vapochill ls kit. using 2mm for each steep that is more than enough to get good contact.




it will be tested soon and we will make some with diferent sizes and get the best size/desighn.

what do you think about it? let's make bet's about performançe! lol

regards, ricky

Sorry, but it's looks like you both are not inventing the powder...

Yours



@itor's MA1




Yours



@itor's MA1


But well, at least a different brand of cigarrettes and different craftmanship

[|RickY|]

Ssilencer, i think you dont understand, check the diagrams becouse on evap pics is dificult to see, check first 2 steeps. if you are talking about imitations, well, all this kind of evaps are very close, why not to put similar pics on each evaporator we see? please check the diagrams better please. and argue about the ideia that moves this evap that i dont see on aitors evap you just saw the size. if i made 1 a litle tall you dont say it's imitation?...

and i dont ever think i'v inventing the powder. just changing ideias with you for example.



i'll put pics of evap finished, trying to show better the 1st layer where it is the powder

[sl4ck]

Ssilencer take a look at the degin drawings, forget the pics(they don´t show all), some part it's @itor/Chily1 like, but the top of the evap bottom has some nice little holes to make the gas pass trought the evap center, so it absorves the heat very close to CPU, evaporation keeps evap center cold since the second bottom step, step by step.

It's not our ideia to make @itor's evap copy, we're only trying to think the best way physic rules work.

Sorry by my english, but i think you understand

EDIT: LOL, almost at the same time

[ilkkahy]

Looking at the first picture you need to make four slightly different blades for lathe in order to be able to make the design. Its possible but making the required tools may take little time.

[Ssilencer]

Ok, Maybe I over reacted, I'm just getting tired of people giving them self credits for things they do not tried first.
I'm not talking about you guys

And sorry, my english is awful too

[|RickY|]

Looking at the first picture you need to make four slightly different blades for lathe in order to be able to make the design. Its possible but making the required tools may take little time.

yes, i'v talked with a lathe operator and he explay-me how to make that slightly different blades but he told-me it will be hard. and it is hard becouse of 14mm deep, it need very slim blades in order to do not touch the lateral channel, and it broke very easy, :S

i'll try to get pics of some blades we have made.

thanks

[|RickY|]

Ok, Maybe I over reacted, I'm just getting tired of people giving them self credits for things they do not tried first.
I'm not talking about you guys

And sorry, my english is awful too

[Brettbeck]

They look really nice.

I like the idea of this one;

[|RickY|]

the evap you see maded is that on the pic, but it's hard to photograph it inside i'll get more pics tonight

[Unknown_road]

nice idea! will work much better then a spiral/stepper evap I think! I always hated the fact that spiral's have little contact area close to the core.

[runmc]

Ssilencer, i think you dont understand, check the diagrams becouse on evap pics is dificult to see, check first 2 steeps. if you are talking about imitations, well, all this kind of evaps are very close, why not to put similar pics on each evaporator we see? please check the diagrams better please. and argue about the ideia that moves this evap that i dont see on aitors evap you just saw the size. if i made 1 a litle tall you dont say it's imitation?...

and i dont ever think i'v inventing the powder. just changing ideias with you for example.

i'll put pics of evap finished, trying to show better the 1st layer where it is the powder

LOL - Tu tiene mucho "POWDER" Ricky

[|RickY|]

hi, more some samples done for testing, we are geting more close to lathe

[n00b 0f l337]

SSilencer you didn't invent the wheel yourself.

[jinu117]

Ahaha... Ricky... I see you followed up with the discussion we had for sure... It LOOKS AWESOME
I honestly think anything after 1 step beyond your bottom 2 is going to matter much unless evap is having hard time keeping up with heatload (doubt it)

[Ssilencer]

SSilencer you didn't invent the wheel yourself.

Fir sure, It is just fun to see people starting to do what we was saying for more than a yeae ago: smaller/efficient evaps.

[_@_]

looking good

wanna see some temp results

[Unknown_road]

Fir sure, It is just fun to see people starting to do what we was saying for more than a yeae ago: smaller/efficient evaps.

well I also like to think that my silver evaps are the best in the world but problem is that without unbiased testing there is no way to tell who is on the right track.

[|RickY|]

Fir sure, It is just fun to see people starting to do what we was saying for more than a yeae ago: smaller/efficient evaps.

i use @ years small and efficient maze style evaps... now i'm studding a new model (FOR ME) easy to make. and my evaps for singles have the same size.


jinu117: i wish have time to test it soon, exams... :S

[jinu117]

Good luck with the exam
When does it end? Can't wait to see the result.

[sl4ck]

Fresh pics , fitting vapo enclosure

[|RickY|]

Good luck with the exam
When does it end? Can't wait to see the result.

finish one today, start another tomorrow for 2 to 3 days i think.
Anyway, i get some minutes on garage



not full lapped.



here is the box for the single that will test the evaps



well, this thred has to many pics, i'll edit my posts, give-me time

[INJViper]

Looking good...

[|RickY|]

same outside size, one more steep.