Quote Originally Posted by The Nemesis
If I were to go with an antec psu I would go with their Neo HE Series but they start around $30 more than the one your looking at. But you definitely want one with multiple or dual 12+v rails. Personally if your about to dive into overclocking you may want to replace that motherboard with a DFI nforce 4 ultra-D. You can find 'em pretty cheap on ebay & in various forums & its one the best overclocking boards out there.
Well I got it up to 2640 now. I set the clock multiplier to 8X and moved the HTT multiplier up to 330. I forgot what setting I had it at, but it did post at 2790 at 1.45v, but wouldn't go into Windows. At 2700mhz I got a quick bluescreen and the computer restarted while loading Windows. I backed off from there to where I am now. I don't know if it's memory, the power supply, or limitations of the processor itself.

My voltage is set to 1.42v and was running stable in BF2. I think I need to upgrade the PS still though. I had to drop my memory down and after that I got no errors. In CPU-Z it shows the voltage fluctuating between 1.344 and 1.409 (not sure if this is accurate or not). I've been happy with my AO350 power supply and noticed that they made a new SLI-ready AO700 (700w). It's expensive, to the tune of $150, but I've been impressed that this 350W has done this well.

Temeratures on the CPU reached 47*C under load. A friend of mine has the CoolIt Freezone and seems to like it, although said it could use a larger resovior, but overall works pretty well. I'd like to get my temps down and might either get that or a Thermaltake Silentwater (I don't want anything overly loud or obtrusive).