D975XBX Badaxe 1333fsb and 4:5

[eva2000]

1067sb has a lower max fsb limit.. you won't be able to get fsb at 1067fsb anywhere near the the mem max....

1067fsb strap limit is around 378fsb on unmodded badaxe... 1333fsb strap has around 429-430fsb limit for me...

my badaxe has no mods and i haven't even shorted the oc debug pin so no vcore options available in bios heh

what's max MCH voltage on P5WD2-E ???

yes 1067fsb strap is more efficient clock for clock on badaxe.. look at my initial clocks with 1067fsb strap at http://www.xtremesystems.org/forums/...d.php?t=105003 - specific post http://www.xtremesystems.org/forums/...1&postcount=41

Tony/Bigtoe has already stated on intel platform 1067fsb strap is more efficient clock for clock than 1333fsb strap.

And you can't really compare mem performance on AM2 vs Intel, it's like saying because DFI NF4 can do TCCD >300mhz 2.5-4-3-7/2.5-3-3-7 then the TCCD can do that on say Gigabyte NF4 board hehe

[bachus_anonym]

1067sb has a lower max fsb limit.. you won't be able to get fsb at 1067fsb anywhere near the the mem max....

1067fsb strap limit is around 378fsb on unmodded badaxe... 1333fsb strap has around 429-430fsb limit for me...

my badaxe has no mods and i haven't even shorted the oc debug pin so no vcore options available in bios heh

what's max MCH voltage on P5WD2-E ???

That's OK. I just want to see how much voltage you'd need for e.g. 375FSB and 4:5 ratio = ~DDR2-940 8-3-3-3.0 or 8-2-2-3.0. Also, isn't there 2:3 ratio ?

EDIT: Exactly my point... 1333fsb is what seems to be triggering those huge low-latency OCs.
I suspect AM2 is not much different and can be compared. People hit very high DDR2-1200+ 8-4-4-4.0, just waaaaaay lower @ 8-3-3-3.0 compared to BadAxe on 1333fsb. Besides, you don't need to look at AM2, just look at other boards for Intel

[Onepagebook]

1067sb has a lower max fsb limit.. you won't be able to get fsb at 1067fsb anywhere near the the mem max....

1067fsb strap limit is around 378fsb on unmodded badaxe... 1333fsb strap has around 429-430fsb limit for me...

my badaxe has no mods and i haven't even shorted the oc debug pin so no vcore options available in bios heh

what's max MCH voltage on P5WD2-E ???

yes 1067fsb strap is more efficient clock for clock on badaxe.. look at my initial clocks with 1067fsb strap at http://www.xtremesystems.org/forums/...d.php?t=105003 - specific post http://www.xtremesystems.org/forums/...1&postcount=41

Tony/Bigtoe has already stated on intel platform 1067fsb strap is more efficient clock for clock than 1333fsb strap.

And you can't really compare mem performance on AM2 vs Intel, it's like saying because DFI NF4 can do TCCD >300mhz 2.5-4-3-7/2.5-3-3-7 then the TCCD can do that on say Gigabyte NF4 board hehe

Bingo, George, you push the right button.
that just give a true lesson on it;
well, for me, I rather buy the performance from intel, cuz Asus ...I just don't buy that either, no need to say other boards