Pictures of V1000 or PC-7 watercooling anyone?

[afireinside]

Time has come for me to get that lian li case I've wanted for the past 3 years. Can't decide which model or how to watercool it though Anyone have some ideas? Pictures prefered.

[Muunsyr]

Give me a few months and i should have a black v1000 kitted out without detroying the overall appearance of the case (ie. all water cooling parts will be inside case). No pics yet I'm affraid and I won't be releasing sketchs until i know it will all work , sorry.

[4Qman]

Im also deciding between a V1000 with a PA120.3 inside. Going to be tough to fit so im leaning towards a V2000 now.

[ReD.SkY]

dude, its tough to fit a BIP3 in a V2000

[Marci]

Is it hell. Fitting a triple rad in a v2xxx series case is simple! See http://www.over-clock.com/ivb/index.php?showtopic=14248

[4Qman]

Is it hell. Fitting a triple rad in a v2xxx series case is simple! See http://www.over-clock.com/ivb/index.php?showtopic=14248

Marci,
Im gona order a 120.3 Thermochill altho i allready have a PA160. I want the 120.3 but will i notice a benifit from a PA160 also. I plan to run a silent rig so quitest fans possible. CPU & SLI cooling via a D5 pump 1/2 tubing.

Cheers dude, sorry to jump thread afireinside.

[Marci]

Im gona order a 120.3 Thermochill altho i allready have a PA160. I want the 120.3 but will i notice a benifit from a PA160 also.

Both is relatively pointless.

[4Qman]

Ok so the PA160 would be up to the job with a low cfm fan.

[Kain XS]

Check the WC gallery (above)

[Syranide]

I have a V2100 and is planning on mounting a PA120.3 on the outside above, when time is right I might open the top of the box up, but I'm not sure since the motherboard is upside down in this case and it might interfere with the cards, so I'm doubtful if it would be wise to lower it into the case, but having the case opened up wouldn't pose a greater problem I think. Basically, I think it would be pretty nice to open up the bottom of the case and have the radiator there, however far from optimal I guess, but there is enough room for sure

Overall I'm extremely happy with the case, especially with the large nice compartment below where my enclosed HDDs now are sitting, and it is absolutly wonderful to fill with noise dampening materials.

[4Qman]

Syranide.

read your post about a silent water setup. Im after exactly the same. Ive changed my mind on a few things thanks to your info u recieved.,

I plann to cut the bottom of the V2000 and mount the PA120.3 there.

[vudoodoodoo]

I have a watercooled V1000B.
D5 pump > Storm G5 > BIP2 > Aquatube
Aquastream > BIP > Twinplex Pro NB > Twinplex GPU > Aquatube
I got pics somewhere... let me dig em up.

[afireinside]

Looks nice marci V2000 is a bit large for my wants though. I was thinking about a BIP3/GT240 off the back with a rad box... Would that work?

[OCme]

Triple fits in the top of a PC-70 nicley

[Tyranus]

He's my PC-7:

[UnreaL]

My PC-61:


Click image for thread, you can do similar with PC-7.

The pa120.3 setup in a v2000 will outperform it - but mine looks better

[Grinch]

http://www.xtremesystems.org/forums/...d.php?t=100170

[afireinside]

Looks nice unreal. I need 4 HDDs though

[sdkevin]

if you can go with full-tower then you can have 2 radiators or even 3 radiators inside one case, I'm talking about V2xxx Series and you can see the picture below, it still can hold up to 6 HDDs which only 4 HDDS shown in the picture

[4Qman]

sdkevin,

Very good mate, what rad is that on the roof, U have any other pics of it. At least i can keep the HDD racks when i get the V2000 case with a PA120.3 at bottom.

[sephiroth8748]

My Lian Li PC-7







specs: D5, Swiftech micro res, storm, silverprop cyclone fusion, bip2, masterklear 7/16 tubing

[el rolio]

supn like this is mine. if you wanna go triple rad you gotta go bigger than a v1000 i nthe v series or just use the pc-xx

check it out, i put in the final choice optie of my 3, refined my fan wiring and took some pics. here is the gallery

r3vo+pc ºº Thermochill PA 120.3 Loop Upgrade ºº

and a few choice pics:


--

--

--

--
And finally: the shot on the kitchen table: showing the hot and cold sides of the rad water temps on the aquaero as well as the temps in bios on startup. CABQE for the win!


!

[lowfat]

here are a few ones of an old internal setup




and an old external setup.

[ShoNuff]

[4Qman]

Mate any more pics with the rad installed on the roof, how tight is it with the fans also on the rad when
running the tubing.

It looks wicked just i think with a SLI setup it will be too tight? whats your thoughts mate as i see you running SLI.