DDR2 Full Specs

[G H Z]

Here's what was under spreader #1 (512mb, single sided).

This was what was under spreader #2 :

WTF, have you confirmed that one stick is 1GB during POST or in Windows? I thought 512 could be double sided, maybe not with these IC's tho I don't know.

[s7e9h3n]

WTF, have you confirmed that one stick is 1GB during POST or in Windows? I thought 512 could be double sided, maybe not with these IC's tho I don't know.

The 1gb stick posts into Windows although I haven't tested how high/tight it can run. I thought I had told you already that if they were fatties, double sided means that it's a 1gb stick .....

[RyderOCZ]

With DDR2...you can get a 1GB stick with IC's on only 1 side of the PCB....expect to see 2GB sticks become more common in the near future.

[s7e9h3n]

With DDR2...you can get a 1GB stick with IC's on only 1 side of the PCB....expect to see 2GB sticks become more common in the near future.

But not with fatties

[RyderOCZ]

But not with fatties

Sorry, I didn't realize you were specifically checking for fatties....I should have read more of the thread

[Sentential]

But not with fatties

I disagree and so will Ryder

[RyderOCZ]

I disagree and so will Ryder

Shhhhh.....let him think I am wrong

[s7e9h3n]

I disagree and so will Ryder

Ok...fine :P Please point me to the nearest 2gb fatty stick then

[Kabauterman]

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:





Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter

[s7e9h3n]

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:





Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter

Those are sweet sticks

[Kabauterman]

i think so too, i i have read the label

i have been surprised over D9 on the Sticks.

i Think it's time to update Post 1 with this chips on the DDR2-800 CL4 Ballistix

[s7e9h3n]

BTW....welcome to XS! I'm sure gorrillaman will update it soon

[Kabauterman]

ty for welcome

but why i can't get RAS Precharge of 2 i think it is a character of D9 chips

[DaWaN]

ty for welcome

but why i can't get RAS Precharge of 2 i think it is a character of D9 chips

You don't have the well known Fatbody chips, but a newer D9, it should clock very well on a little bit looser timings than fatbody, just try it, those sticks are very good for that price you've paid

[Kabauterman]

416 @ 4-3-3-12 is no Problem with 2,3 V

The only Problem is than i can never Test the Max Clocks, with the 667 divider of the AOpen Board can i get only 418 MHz by the Best FSB 251 MHz

[Stelios]

Finally , i'm an owner of some fatties ...







Bought from Ebay .

[Kabauterman]

nice pics

and how good are these Original Micron?

[Stelios]

nice pics

and how good are these Original Micron?

Right now i don't have a DDR2 board . You see , i'm waiting for conroe mobos and right know nothing is available in Greece (except Intel) ...

I'll test them tomorrow with a 930 and a P5LD2 with a single stage ... Hope to clock nice .

[deadlock7]

I'm sure they will clock fine..(i hope so)!

[ozzimark]

I'm sure they will clock fine..(i hope so)!

i bet they do. my crucial value stick does quite well, even if it's a 256mb with BN-3

http://eclipseoc.com/phpwcms_filestorage/1/1_267.png

416 @ 4-3-3-12 is no Problem with 2,3 V

The only Problem is than i can never Test the Max Clocks, with the 667 divider of the AOpen Board can i get only 418 MHz by the Best FSB 251 MHz

bummer.. i have the same set as you, it seems that 4-4-3 is capable of 520mhz

i should pop off the spreaders as well and see if it's the same B6 chip binned to -25F speeds. how did you take off the spreader without ripping up the chips too?

[Sentential]

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:





Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter

Fantastic RAM. You have the highest binned chips Micron has to offer. B6-25F

[Kabauterman]

i bet they do. my crucial value stick does quite well, even if it's a 256mb with BN-3

http://eclipseoc.com/phpwcms_filestorage/1/1_267.png



bummer.. i have the same set as you, it seems that 4-4-3 is capable of 520mhz

i should pop off the spreaders as well and see if it's the same B6 chip binned to -25F speeds. how did you take off the spreader without ripping up the chips too?

i pushed a credit card under the metal Clips on both sides and pull them up.
Then i use a hair dryer aber make the HS hot so i can pull the HS up from the Chips.

[|SiLA|]

i've bought ocz vapue pro 2x1 and running them without any probs at 800(300*15) 5444 2vdimm with my pentium D 930 i think they can go a bit higher

but worth the price..paid em 170 euros labled 333mhz 55512 1,8v

[s7e9h3n]

Here are my new Ballistix PC2 5300

[ozzimark]

Here are my new Ballistix PC2 5300

[IMG]http://img46.imageshack.us/img46/7041/ica6wp.jpg[IMG]

mmmmm, the sticker probably says .16FB, doesn't it? (or are they 512mb sticks, single sided. that'd make it .8FB )
you're a lucky one. haha

i guess i'll pop the spreaders off my ballistix too, but i have a feeling that i'll see -25F binned D9GMH under there