Dual Core Opteron Thread #2

[mursaat]

I've won one of those CCBBE0610DPWM from ebay. Ended a bit hig$ but still cheaper than in Spain and here I can't know the stepping. The last one I bought for a friend was another CCBWE 0551 UPMW

Next tuesday I'll post my results (if it arrives). I just want something cooler @ 2700/2800 and benchable at 3ghz (see sig for current 165)

[blazin-asian]

here is a cpu-z verified of my CCB1E 0609FPAW

Cpu-Z verified

i doubt it will be stable, but im going to try some benches.

1.55v in case you were wondering

[ChkDsk]

This chip scares me!

OMG...

[itznfb]

This chip scares me!

OMG...

is that yours? what stepping? and what cooling areyou using?

[ChkDsk]

is that yours? what stepping? and what cooling areyou using?

Yup, thats mine... It's an 165, IHS on, watercooled (still not upgraded so: Asetek Antarctica CPU block, Hydor L30, Blackice Xtreme 3, and Asetek VGA block on X1900). After 1hr clockgenned to 2900MHz... 45mins so far on freaking stock volts!

Oh you wanna know the stepping? 0610DPMW...

[itznfb]

sexy

[Repoman]

Best I've seen from that stepping

that's better than both of mine, one of which did 2844@stock and the one I'm testing now which is gonna do ~2826-2835

[ChkDsk]

This thing is freaking me out! Clockgenned to 2900 after 1hr shot... Still going!

Memory is quite at its limits now...

[dot64]

i would say its definetely the ram slowing you down, you could use a divider (in bios) to run the memory slower than the HTT.

how do i use a divider? i looked around in my bios for anything that says divider but i didnt see anything. all i found was a page about the ram clock which i set to auto.

[CompGeek]

Wow, thats from dave too.... go dave!

[ChkDsk]

Wow, thats from dave too.... go dave!

Hail to Dave... Clockgenned to 2930 now... Still going strong...

[CompGeek]

wowzerz, definitley got 3ghz easy there.

[itznfb]

CompGeek when is that CCB1E you got from ebay expected?

[ChkDsk]

wowzerz, definitley got 3ghz easy there.

Looks like I got a 170 CCB1E 0609FPAW for sale... Damn. This thing kicks some ass! IHS is still on!

[CompGeek]

CompGeek when is that CCB1E you got from ebay expected?

Today, should be waiting for me at home, I get off work in 10 min I'll post results tonight... I hope.

[CompGeek]

Looks like I got a 170 CCB1E 0609FPAW for sale... Damn. This thing kicks some ass! IHS is still on!

If the chip does that well with IHS on I say leave it, probably not much to be gained from removal and def not worth the risks IMHO.

[ChkDsk]

If the chip does that well with IHS on I say leave it, probably not much to be gained from removal and def not worth the risks IMHO.

Well, depends on temp increase if I up the volts... Not tried yet. Most will do well with stock volts but with 1.45+ most will run extremely hot. But that's something I'll find out within a few hours. 11pm now, but this chip will keep me awake, thats for sure!

2930 still going... Can't go much faster with this divider I think... Memory will probably cause BSOD. I wasnt expecting this

[turbotoaster]

use systool or a64 tweaker to drop the ram in windows, works and doesnt cause ya prime to crash, then up ya clocks

[ChkDsk]

use systool or a64 tweaker to drop the ram in windows, works and doesnt cause ya prime to crash, then up ya clocks

Hehe tried it before this run... 166 -> 150 = Lockup

So I'm at 35mins 2930MHz now. Will reboot soon and set 150 divider and 2950MHz CPU.

[Repoman]

Awesome

4MHz behind my naked 0608 on water anyway hurry it up lol, just prime for 10mins and keep raising until it fails I usually start at some rediculous speed (2.95+stock volts) to make sure I don't waste any time if it will do that. Then back down in increments of 2-5 htt, depending on how stable it was (or don't back down at all )

[Delirious]

Well the 170 ccbwe 609fpaw i got does not better than my 165. Runs at 2500 stock vcore, then it needs 1.55v for 2.8 which is the same as my 165.

Rather dissapointed, oh well off to ebay this one goes.

[CompGeek]

my 0608 is here..... shutting down to test!

[ChkDsk]

Hmz... >2960 it's being an ass to me. I'll give 702-2BTA a try, brb

Hmmz... Looks like something else is limiting here! Well, running now 3GHz dual prime @ 1.39V now.
Why I think something else is fcuking with me? Both cores would fail within a minute before raising the HTT volts. On the other side, I've tested this board up to 340*9 with my old single core 146. Well, I'll keep you guys posted. 5mins @ 3GHz now

[CompGeek]

I'm needing 1.55v for 2950mhz and temps are skyrocketing, I think this chip has a lot to gain from IHS removal.

51C right now, I just had a 165 the other day that did 40-44C at the same volts with the IHS on.

It'll be comin off soon...

[ChkDsk]

I'm needing 1.55v for 2950mhz and temps are skyrocketing, I think this chip has a lot to gain from IHS removal.

51C right now, I just had a 165 the other day that did 40-44C at the same volts with the IHS on.

It'll be comin off soon...

Yeah my ccb1e 170 was also damn hot with IHS on... Removed, problem solved

165 though is kicking ass now 10mins
IHS on, load temp 38-39 @ 3006MHz