....from where?.......Originally Posted by Waus-mod
....from where?.......
INTEL PWA FOR EVER
Dr. Who my arss...
.........
hmm Tarosa is using a PCI video card...
That might be it maybe?
I havn't noticed anyone else using a PCI-E card and has gotten past 240FSB?
'Gaming' AMD FX-6300 @ 4.5GHz | Asus M5A97 | 16GB DDR3 2133MHz | GTX760 2GB + Antec Kuhler620 mod | Crucial m4 64GB + WD Blue 2x1TB Str
'HTPC' AMD A8-3820 @ 3.5GHz | Biostar TA75A+ | 4GB DDR3 | Momentus XT 500GB | Radeon 7950 3GB
'Twitch' AMD 720BE @ 3.5GHz | Gigabyte GA-78LMT-S2P | 4GB DDR3 | Avermedia Game Broadcaster
Desktop Audio: Optical Out > Matrix mini DAC > Virtue Audio ONE.2 > Tannoy Reveal Monitors + Energy Encore 8 Sub
HTPC: Optoma HD131XE Projector + Yamaha RX-V463 + 3.2 Speaker Setup
No i also use a 4mb pci..
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
If fred tells that tarosa and tam dont have an rev 00A board... i know the problem.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
why is bios not accessible if windows is OK
guys have you tried the PCI Express frequency trick Hirpo suggested for more FSB?
No i allready tried.
follow this thread for the problem http://www.xtremesystems.org/forums/...ad.php?t=95834
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Hahaha, Tarosa just came back to OC after 5 years absence-- I bet he was busy collecting these DDR2 while he was sleeping
@Waus-mod
AFAIK, the Rev of retail M/B came into Akiba last week is .00A as shown KUBOKUBO
And tam and tarosa?
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
I highly doubt they got other revision for their M/B b/c they bought them at the same time.
Unless AOpen mixed other rev in the same shipment-- is that what you susupect?
newegg is showing 1066fsb support... you guys might want to give aopen a call, these boards did cost you a LOT.
i5 3570K@ 4.8GHz 1.32v, 32GB Gskill 1866, Gigabyte g1 sniper m3
HD7970@1125/1575 stock voltage
1TB F1+2*128GB Crucial M4
Silverstone 450w, no case
2560*1440@120Hz overclocked catleap
Steelseries G6v2+5600dpi modded logitech trackball
it would be nice if results were posted on original page as that looks how it was originally planned.
Opteron 170 CCB1E 0550VPMW @ 2.65ghz 1.275 vcore (Big Typhoon) capable of 3ghz
OCZ Gold DDR400@2-2-2-5
74GB Raptor
DFI UT Ultra-D
Gigabyte 6600gt
yes.. i think the rev 00A is fsb stuck and a other not.. so i hope you can ask if they are using an other rev.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Rev 00A I have
Last edited by wwwww; 04-11-2006 at 05:49 PM.
By next week hopefully most already get their board@ least here in US.
Boards and T2600ES combo will be on sale here @XS probly by Fri.(from some members)
A few etailers will carry the board by weekend and I will try to get xtra boards for whoever needs it.
By next week hopefully most already get their board
Boards and T2600ES combo will be on sale here @XS probly by Fri.(from some members)
A few etailers will carry the board by weekend and I will try to get xtra boards for whoever needs it.
You got one mobo.
denisb@hwluxx retail aopenboard delivered yesterday in Germany
seems to have no probs
@mine what revesion board + bios do you have ?
Also what stepping cpu?
its denis.bodes board--bios is R1.03 - board retail aopen Germany
stepping 8
Last edited by mine; 04-11-2006 at 10:36 PM.
could you please look between the dimm solts and get the revision number of the actual board as well
may say A00 or A01
which store?
French Overclockers roxxxxxx
OCM Team addict
Yep, they all have Rev 00A.
BTW, where is your setup details?
If you are asking so many questions, you'd better tell us.
The issue may be due to other than M/B itself.
By New Beetle
(Set up)
M/B：AOpen i975Xa-YDG Vmod / BIOS：R1.02
M/B Bed：「V-TEC ARC Bed Rev.3.3」
CPU：Core Duo T2600 / QHJJ ES 7530A497
CPU Cooling：「Kuri Pro２」+ DICE
Chipset Cooling：Normal
Memory：CORSAIR 5400C4 512MB x2 / CL4-3-2-8
VGA：ATI XPERT 98 PCI 8MB
HDD：IBM-DTLA-307030 / U-DMA 5 (ATA100)
PowerSuplly：Zippy-460WS #2 （3.3V Rail Mod）
Vcore：1.600V/ Vddr：2.15V/ Vio：3.29V
OS：Windows Server 2003
Remarks：DICE Cooling / FSB240MHz Boot / Graphite sheet
Edit: Image link fixed
Last edited by fredyama; 04-12-2006 at 01:42 AM.
wich revision mine"? rev00A?
@ fred.. i will give my info asap
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
00A
yeahh i heard from my contact there is only a rev 00A
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Posting Permissions
Reply With Quote
Bookmarks