Opteron 170 CBBWE 0550UPMW

[mongoled]

www.trend4pc.de

Cheers Pete@X, are you happy with the service? Someone here at XS says they open the boxes, pre-test, then put them back in the boxes. This would mean tht those not-pretested would be poor performers

[Matt Hirst]

Some great results make me wonder if I ought to pop the lid of my 170???

regards,

Matt

[mongoled]

Thank you for tht information, email has just been sent in English and Danish, hehehee. I hope they send to Europe



Is the price on there website including taxes, from wht i gathered the one price is with tax the other is without

Well they only send to Denmark, the search goes on......

[Pete@X]

Cheers Pete@X, are you happy with the service? Someone here at XS says they open the boxes, pre-test, then put them back in the boxes. This would mean tht those not-pretested would be poor performers

Hiya ...

yapp ... happy with them and no Probs whatsoever. Don`t believe these rumours you´hear/see floating around. You can be sure that an E-Tailer can not do that without risking the business - and have you seen proof of that ? I guess not ...

Anyway ... my 170 is primeing @10x305 right now (at least I hope that ... just started the run before i left for work ) ...

cya

[jackea]

Great result pete@X, that may be highest clocking Dual Opty on the Orb!
I have got the same stepping but on the 165 model, it is almost topped out
at 2800MHz, IHS popped and it takes 1.64V to clock that high.

Good luck!

[K.I.T.T.]

@ Pete : What vcore?

[Pete@X]

@ Pete : What vcore?

Hi ...

i did that Prime Run @1,584VCore, but right now that Babe does the same (~ 3h Prime so far) @1,550 . I´m just on the way to find the min. VCore i need for 10x300

As i was asked for a A64 Tweaker screen, here we go (close to 18h Dual-Prime :
(DRAM Drive Strength/DRAM Data Drive Strength 5/1)

[K.I.T.T.]

Very nice

be sure to post it here:
http://www.xtremesystems.org/forums/...ad.php?t=86531

[Pete@X]

Very nice

be sure to post it here:
http://www.xtremesystems.org/forums/...ad.php?t=86531

See Post #17 there

[K.I.T.T.]

lol, my bad

Updated now

Did you try it at all on air? And any idea what it does at 1.37v? I'm trying to predict what mine will do on higher vCore My cooling is really holding me back. Can't wait till i watercool it in a week

[Pete@X]

lol, my bad

Updated now

Did you try it at all on air? And any idea what it does at 1.37v? I'm trying to predict what mine will do on higher vCore My cooling is really holding me back. Can't wait till i watercool it in a week

Air ... nopes sorry .... not tested, but i know from that babe (on water):

1,328 (CPU-Z) - Bios on Auto/Auto - so should be 1.35V : 10x270 > 12h Dual Prime on water
1,488 (CPU-Z) was 10x290 > 12h Dual Prime (possible less VCore)
1,584 (CPU-Z) was 10x300 > 17h Dual Prime (possible less VCore)

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks

Wanna see something really interesting (i could take some pics at the location of my retailer) ->

Opti 170 0550UPMW Batch 50193



Opti 170 0550UPMW Batch 50193



Just compare them .... both are 50193´s - but from differnt waferset´s , that could be the reason for some low and some very high clocks ...

[ThorLite]

Mine new Opteron 170 from trend4pc.de original CPU not pretested......



First results at 3.1GHz 1.425x1.04 1.478V.Iam using 133 divider since iam testing the cpu.Prometeia Mach I R404 modded for cooling.....

[s7e9h3n]

Air ... nopes sorry .... not tested, but i know from that babe (on water):

1,328 (CPU-Z) - Bios on Auto/Auto - so should be 1.35V : 10x270 > 12h Dual Prime on water
1,488 (CPU-Z) was 10x290 > 12h Dual Prime (possible less VCore)
1,584 (CPU-Z) was 10x300 > 17h Dual Prime (possible less VCore)

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks

Wanna see something really interesting (i could take some pics at the location of my retailer) ->

Opti 170 0550UPMW Batch 50193



Opti 170 0550UPMW Batch 50193



Just compare them .... both are 50193´s - but from differnt waferset´s , that could be the reason for some low and some very high clocks ...

Nice work...which one is yours?

[Pete@X]

Nice work...which one is yours?

None of them

Mine new Opteron 170 from trend4pc.de original CPU not pretested......

First results at 3.1GHz 1.425x1.04 1.478V.Iam using 133 divider since iam testing the cpu.Prometeia Mach I R404 modded for cooling.....
]

So get it Prime Stable , mine does SPi on Water 1,6VCore 10x315 and a bit more, but SPi is useless regarding 24/7 stability ... Prime Custom for some hours with FFT`s in place counts

[dogsx2]

None of them



So get it Prime Stable , mine does SPi on Water 1,6VCore 10x315 and a bit more, but SPi is useless regarding 24/7 stability ... Prime Custom for some hours with FFT`s in place counts

Was that a hand picked one Pete?

[Pete@X]

Was that a hand picked one Pete?

Hiya ...

nopes ... just drove by - picked 2 and left ... so i guess we can call it "lucky shot" .... the 2nd acts like the 1st ... 10x290 stable @1,488V ,.. not tested further as right now the 1st is still priming 10x300@1,55V

[dinos22]

we need to see when the cold bug hits on these.....very interesting

[ReD.SkY]

has anyone gotten one of these steppings from the US yet?

[Webmonkey]

Looks to be a great stepping, guys with the 0550UPMW can you please post where you bought your CPU from

I got my Opteron 170 0550UPMW from proshop.dk

[-.-PhanTom-.-]

I got my Opteron 170 0550UPMW from proshop.dk

Damn, should have ordered one when I saw thewy had 4 in stock....*slaps my own face*

[foodfightr]

If anyone gets these from the US, please PM me! I'd like to order one immediately.

[mongoled]

Right now i`m on 10x300@1.550 (CPU-Z) and past the 3h mark for sure ... so does not look bad at all

Just beautiful

Btw ... i know that there are at least 3 batches of so called "Wafernumbers" around ... (Down Left, 7 Numbers + 1 Letter) ... so it could also depend on that how good the 0550UPMW in your hand clocks

Nice find

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey ) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus , we are in Europe

Am keeping a close eye on this thread

-EDIT-

Just tried http://www.proshop.de but only get a black page

[ThorLite]

Just beautiful


Nice find

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey ) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus , we are in Europe

Am keeping a close eye on this thread

-EDIT-

Just tried http://www.proshop.de but only get a black page

No i have used only phase.The cpu does up to now 3.13GHz 1.48V dual folding .I believe that with my ss phase setup you gain about 300-350MHz with the same vcore so with air-water it will do around 2830.
Iam very pleased with the cpu so far and iam willing to give to this cpu up to 1.6V i have some MHz still to gain easily............
My old 4400+ was really.......... 3GHz 1.68V

[Webmonkey]

Just beautiful


Nice find

So your pics show:

1st Pic: 1387434L50193
2nd Pic: 1387396L50193

The differences is in the 5th/6th/7th digits, i.e. we have either '434' or '396'. ThorLite has a 434 which also seems like a nice chip (yes i see he is on phase). Pete@X, would you mind telling us if your chip is a 396 or a 434?

ThorLite, have you tried you chip on air or water, so we can try and do a compare to Pete@X. Looks like im going to try and buy from trend4PC.de, will contact proshop.dk (thanxs Webmonkey ) to see if they ship to Europe. There is a 0550UPMW on ebay.co.uk at the moment, but even though the seller says he ships to Europe, he wont send to Cyprus , we are in Europe

Am keeping a close eye on this thread

-EDIT-

Just tried http://www.proshop.de but only get a black page

try .dk instead of .de - it is a Danish web shop.

[mongoled]

try .dk instead of .de - it is a Danish web shop.

LOL, thank you very much, my apologies. I in no way meant to offend you, hehhehee . Looks like im going to have to apology's to the Germans also, hehheee .