Find out the Max Case Temperature and Max Power draw of your CPU

[mongoled]

Here is mine

AMD64 TCaseMax - v1.14
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 7, Stepping: 1
Extended CPUID: Family: F, Model: 27, Stepping: 1
CPUID String: 20F71
Processor APIC: 0
Processor: AMD Opteron 146 (San Diego)
CPU Speed: 3000.77 (300.08 x 10.0)
Revision: SH8-E4
Platform: Socket 939
Startup VCore: 1.400v
Maximum Case Temperature = 67C
TDP: 0.0 Watts

Funny thing, my TDP is blanked out what would cause this?

[hal2710]

Hi all,

This is my out going B-i-t-c-h !!


AMD64 TCaseMax - v1.14
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: F, Stepping: 2
Extended CPUID: Family: F, Model: 2F, Stepping: 2
CPUID String: 20FF2
Processor APIC: 0
Processor: AMD Athlon 64 3000+ (Venice)
CPU Speed: 1799.79 (199.98 x 9.0)
Revision: DH8-E6
Platform: Socket 939
Startup VCore: 1.400v
Maximum Case Temperature = 55C
TDP: 38.2 Watts



Can only get to about 240htt x 9 (2160mhz) @ 1.45v

My motherboard has a MAXVid bug. It won't give the vcore anymore than 1.45v and it's not all that stable at that.


Sacificed for Xmas (Ebay beware)

On the positive side My new Opteron 144 (CABNE) should be here about 19.30 gmt today !!!!!!!!!!!!!!!


Respect

Hal2710

[The Coolest]

Here is mine

AMD64 TCaseMax - v1.14
----------------------

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 7, Stepping: 1
Extended CPUID: Family: F, Model: 27, Stepping: 1
CPUID String: 20F71
Processor APIC: 0
Processor: AMD Opteron 146 (San Diego)
CPU Speed: 3000.77 (300.08 x 10.0)
Revision: SH8-E4
Platform: Socket 939
Startup VCore: 1.400v
Maximum Case Temperature = 67C
TDP: 0.0 Watts

Funny thing, my TDP is blanked out what would cause this?

That is very odd. The 146 Opteron has 'D' Thermal Profile, in which the highest TCM/TDP is 65C/67W. Now in your case for some unknwon reason your chip is showing a TCM which is no included in the thermal profile. That is why you see TDP 0.0, and the TDP field is grayed out.

I will extend the 'D' thermal profile as its the same as 'A' TP which the higher rated opterons use.