Asus A8N32-SLI initial impression....WOW!

[HKPolice]

I have the Ballistix Z503 kit 1gx2 and I don't see why to dissable Dynamic Idle cycle.
My memory works OK with Dynamic Idle cycle enabled.
Any more info on this?

I also think that L1 and L2 cache ECC should be enabled since this cache supports ECC.
This enables detecting and correcting errors on L1 and L2 cache.
The question is what are the default values?
On the contrary most DIMMs do not support ECC and ECC should be dissabled.

Mine doesn't even run memtest86 without disabling and leaving the idle cycle at 16. Running 280Mhz 3-3-3-8, what are your timings etc?

Ya, we need an answer from a tech about the ECC cache values.

[Marios]

Mine doesn't even run memtest86 without disabling and leaving the idle cycle at 16. Running 280Mhz 3-3-3-8, what are your timings etc?

Ya, we need an answer from a tech about the ECC cache values.

I haven't checked yet how far may dimms can go.

I just set them at 250, 3-3-3-8, 1T, checked them overnight with memtest86+ and that's all. I have got screens for the rest of my DIMM settings (everything is manually set) that I can post here, in case that they might be of any good.