This mobo also only uses 1VTT regulator when the datasheet even shows there should be two. (Luckily I happen to have a few of them on hand, I'll try installing a second one)
Also, I'm really lost as to a Vdimm mod. I havn't been able to find the regulator chip, or if the Vdimm is driven off of the 3.3 or the 5V rail. (If it's 3.3 I'll just do a Vdimm = 3.3 mod)
Someone help me.
Vcore is setup really weirdly on this board too. The regulator they chose is only capable of handling 4 phase power, where are the other 4 phases coming from? You can probably guess, that extra .2V option. There's an analog switch and 2 little controllers for those extra fets.
Another update: Now I'm stealing some of Shaminos work from another mobo, but apparantly a resistor between pin 6 and pin 3 of the RT9214 will increse the voltage. Start with 50K and move down. I can't find the datasheet on it though. I'll check the resistance on this mobo to make sure something crazy wont happen, but it looks almost ready to go.
Updated again: The resistance is only around 98ohms, so 50K will be fine. Even 10K would be fine.
Reply With Quote
Bookmarks