Any GTO/GTO2 > 16 pipelines results yet?

[LittleDevil]

I modded my card today but i have problems with black screen

[Supertim0r]

I modded my card today but i have problems with black screen

nice clean job

blank screen from what i've heard is heat.

under 55c should be great

[KoHaN69]

I modded my card today but i have problems with black screen

That looks like you only did VDDQ


Follow the guide http://www.techpowerup.com/articles/...g/voltmods/101
http://forum.techpowerup.com/showthread.php?t=20

[TEDY]

anyone tried this BIOS

http://simon.webideal.ca/X800GTO2/sx850pe.bin ????

[^don.k's^]

My gto2 @620/630 has died... Don't know why, after 1 month of fully playing, i was playing CoD2 for 3-4hours then the pc hanged up, then artifacts came at the reboot... Waiting for RMA... I hope at least the new can reach xt pe frecs...

[KoHaN69]

My gto2 @620/630 has died... Don't know why, after 1 month of fully playing, i was playing CoD2 for 3-4hours then the pc hanged up, then artifacts came at the reboot... Waiting for RMA... I hope at least the new can reach xt pe frecs...

what cooling did oyu have on it?

what temps were you runnign at?

didi it restart by itself?

[^don.k's^]

No, it didn't restart by itself, running @45-50º on full under water, i only have it to 620/630 for bench, when crash it was @600/600.

[einCe]

*fears for gto2's life*

[Damien]

atitool->settings \|/ Fan Control

water would be best.
otherwise, this will do

http://www.ocia.net/reviews/v1/page1.shtml



thermalright vga cooler

I checked thermalright's compatibility list a while back and I'm pretty sure it said it's not comp. with it

[Millyons]

hey did anyone come across MSI x800GTO i came across it in some price list but there it said its 256mb 128bit??? is it possible to be 128bit on a gto, also i checked MSIs website but they dont have anything about it yet

[Damien]

Compatibility for V1

ATI
GPU

Interface

Compatibility

Remark
X800 XT

PCI-e

NO

AGP

NO

[Supertim0r]

That looks like you only did VDDQ


Follow the guide http://www.techpowerup.com/articles/...g/voltmods/101
http://forum.techpowerup.com/showthread.php?t=20

this is vgpu

[MRBIGSHOT]

3rd gto2

524 /596 stock heatsink

arctic cooler 5 rev 2 with ceramic

531 / 602

what a dog. god hates me and these things. at least 2 outta 3 did xt speeds. im 0-3 on the pe speeds.

its getting hard to sell these on ebay.

[KoHaN69]

3rd gto2

524 /596 stock heatsink

arctic cooler 5 rev 2 with ceramic

531 / 602

what a dog. god hates me and these things. at least 2 outta 3 did xt speeds. im 0-3 on the pe speeds.

its getting hard to sell these on ebay.

edit: (had to remove comment)

[LexDiamonds]

zap and rma them

[KoHaN69]

[KoHaN69]

correct voltmod guide?

http://www.techpowerup.com/articles/...voltmods/112/2

[SoF]

well I was looking around in some german boards and asked some guys if they successfully modded their Connect3D cards.
there were some successfull people telling me their cards could be modded without any problems.
but one mentioned that some Connect3D cards might have lasercutted pipelines - is this true?
I never heard of Connect3D GTO cards having laser-cutted pipelines.
anyway I think I'm going to buy a connect3d this month :>
I don't like my 6600GT anymore - I feel so damn slow

[Supertim0r]

well I was looking around in some german boards and asked some guys if they successfully modded their Connect3D cards.
there were some successfull people telling me their cards could be modded without any problems.
but one mentioned that some Connect3D cards might have lasercutted pipelines - is this true?
I never heard of Connect3D GTO cards having laser-cutted pipelines.
anyway I think I'm going to buy a connect3d this month :>
I don't like my 6600GT anymore - I feel so damn slow

why not getting a GTO2 ?

[K.I.T.T.]

I think i just killed my card wit the VGPU mod. I shorted that tiny dot thingy next to the bottom solder pad and my pc turns off in less than a second with it in now

Im on my 6660GT now. Hopefully, it isnt dead.....Ill try tomorrow when i get my desoldering pump back.....

[blind_ripper]

buyd me a sapphire X800GTO² and it did 550mhz on core and 650mhz on mem, but i cant unlock it check it
http://i3.photobucket.com/albums/y90...o650mhzmem.jpg
i ran 3dmar05 to see and thats a normal 12pipe card score.
http://service.futuremark.com/compare?3dm05=1399312
ati flips some times , here i flashd it to a x850xt bios stil 12pipes
http://i3.photobucket.com/albums/y90...er/atitool.jpg

[blind_ripper]

so i tryde to flqsh agin in dos bud now i get tis error , i type flashrom -p 0 bios name and it says , serial rom
bios name file open error.
can somewanne help me here ?

[MaxxxRacer]

The connect 3d's are not laser cut. They are just like the GTO2's but you arnt garunteed R480. Sometimes you will get R423. The other difference is that they ahve 2ns ram instead of the GTO2's 1.6ns.

But despite the slower ram there are a number of people on the forums getting close to or hitting 600mhz on the mem.

[Supertim0r]

so i tryde to flqsh agin in dos bud now i get tis error , i type flashrom -p 0 bios name and it says , serial rom
bios name file open error.
can somewanne help me here ?

you need the flashrom16p

flashrom -f -p 0 yourbios.bin

[KoHaN69]

I think i just killed my card wit the VGPU mod. I shorted that tiny dot thingy next to the bottom solder pad and my pc turns off in less than a second with it in now

Im on my 6660GT now. Hopefully, it isnt dead.....Ill try tomorrow when i get my desoldering pump back.....

linkme to which mod you followed