Opteron 146 CABNE + Aluminum Mousepot revisited! 3600mhz!

[afireinside]

http://valid.x86-secret.com/show_oc?id=46682





I have no idea why I got my best time with SP2004 running

My DI keps chunking up and temps skyrocketed I have to keep the "pool" visable and make sure all is well at the base. I guess powered DIce isn't good. Saw -60C loaded at 3600mhz. Overall I'm happy I spent a lot of time fighting with this damned DFI board and it not giving me video. With more time I could have gotten 3500mhz 3d stable and 3550 8m I bet. With ln2 I'd see 3700mhz? 240C is my optimal no cold bug temp in windows.

[Magnj]

mother of god...that is glorious

[babyelf]

sick mate

lol really sick

congrats

[afireinside]

Thanks guys BTW, this was done in win 2k with ricky tweak. I booted XP pro, set diagnostics mode, and it never fully loaded again So I had to use my 2k partition.

[NickS]

Holy man. Amazing. WR for Opterpwn?

Wow...I'm in shock. That SuperPi 1M is crazy. :drool:

[ozzimark]

heh, nice work afi. i take it this means that you did encounter a cold bug at some temp?

[afireinside]

NickS: I've had the WR this whole time AFAIK unless you think suicide shots count as WRs. In that case some guy with a prommie has it.

Ozzimark:I cold bugged until 240C in smart guardian (-15C BIOS I think?) which is why I used to run SP2004 to load the CPU and raise temps (you can see it in my 23.1s shot) but I found out later on that it wasn't needed as the chip got warm enough in windows using higher vcore.

RAM:


It's mushkin PC4000 Redlines at 3.5V

[ozzimark]

that's a pretty warm cold bug
what dram drive and dram data drive are you using?

[NickS]

Oh, sorry Afireinside. Still some nice clocks!

[afireinside]

I'm using 1 and auto. Not sure which is which but the one that goes up to 7 or 8 is 1 and the other is auto lol

other settings:
3x ldt
10x multi
310 htt at boot
1.55v startup
1.55 123% 1.9vcore
1.8vdd
1.3vldt
3.5vdimm
8 up 8 down whatever that setting is

[GOESA]

Good work AFI, u think you could get in to the 22s with this cpu?, you are pretty close already..

/Grau

[WesM63]

Woah.. nice work bro!!

22sec should be ur next goal

[afireinside]

I'll have 22s once I get win XP to work

[krampak]

1.84V Have you tried with less?

[afireinside]

Of course. I need a SLIGHTLY better (but not to cold) tube OR ln2 so I can keep the right temps and run 2V

[mag|c]

thats sick!!!

pitty that cabne aint around for sale anywhere anymore

[bachus_anonym]

Ain't got no 32M, AFI? Gimme some eye-candy
Results look better session after session, man! Your determination is just great! Impressive

[eR1k]

I'll have 22s once I get win XP to work

Can't wait to see the results !

[ozzimark]

I'm using 1 and auto. Not sure which is which but the one that goes up to 7 or 8 is 1 and the other is auto lol

hahaha, all right. thanks. i read somewhere that the cold bug can be effected by the drive strength. perhaps play with it, though it would probably mean getting more cpu mhz at the expense of ram clocks if you got anywhere with it

[Korpse]

I got sigged? holy moly!

Nice work AFI, keep it up dude

On the other hand, I want all your rigs to burn out so CoD can overtake you with ease

[s7e9h3n]

I'll have 22s once I get win XP to work

Install win2003 and you'll see 22's much easier than with XP

[metro.cl]

awsome mate

[Stuperman]

those are some sick clocks, keep up the good work.

[[XC] moddolicous]

Nice run afireinside. I stil say u should give dbench a try @ that speed. Would probably be under 100. Back on topic, Try these settings, they may help u get into 22's. Read preamble: 5.5, Max async latency: 7, TRFC: 12 and idle cycle limit: 0.

[s7e9h3n]

RAM:


It's mushkin PC4000 Redlines at 3.5V

Hmmm...interesting....I just noticed your tweaker shot and your trtw @ 1. I've tried that setting and can't get it to stick >250Mhz and I've been told that Oskar has made sure that the setting won't work >250 as it may corrupt your memory. This is what I run my Twinmos BH5's @. Of course you would have to use a couple of different settings due to ch-5 and the opties (eg. trfc14, and mal/rp @ higher than normal )