X2 24/7 Stable Overclock Settings

[njkid32]

This is a great thread and has been edited at the starters request to remove useless off topic posts inside of it so everyone can get right to the data. If you have questions about a post, PM the author Ugly n Grey

Ok lately I have been getting several requests for good 24/7 settings for my X2. I think if we start a thread so people can post their 24/7 stable settings it may help others that are just starting out on their X2. So please post your 24/7 stable settings. This thread is here to help not to impress so please dont turn this into competition and a Q and A thread just settings please.... SS's are welcome as well..

*********Please if you have any questions post a new thread this is for settings only********* Thank you!!

Here is a blank text to make it easier.
Also
Here is what it should look like:

System
3800+ X2 CHBHE 0526UPBW air cooled W/Big Typhoon
HTT-295==2.95ghz @ 1.55v
DFI NF4 Ultra D 510-2fixed bios
Evga 6600GT PCI-E
2x512 OCZ-OCZ4001024ELDCPE-K 246MHz w/166 divider
2x 37gig Raptors
485w Enermax PSU

Win XP Pro SP2

VID=
VID SPECIAL= +113%
CHIPSET= 1.6
LDT= 1.3
LDT= 3x

CPC = 1T
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 166 MHz 7.8us (1168)
Write CAS Latency(Twcl) = 1clk
DRAM Bank Interleave = enabled
Skew = decrease
Skew Value = 0
DRAM Drive Strength = 8
DRAM Data Drive Strength = 3
DDRAM Response Time= normal
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 16clks
Dynamic Counter = enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = disabled (4 bursts)

[ThorLite]

System
4400+ X2 CCBWE 0522TPMW Prometeia Mach I
302x10 1.65V
DFI NF4 Ultra D 704-1
ATi X800XL
2x 512 G.skill PC4400LC 0431
2x 300gig Western
650W Silverstone PSU

Win XP Pro SP1

VID=1.5
VID SPECIAL=1.10
CHIPSET=1.5
LDT=1.4
DDR=2.63

CPC = 1T
CAS Latency(CL) =2.5
RAS to CAS(Trcd) =3
Min RAS# Active time(Tras) =7
Row Precharge Time(Trp) =3
Row Cycle Time(Trc) =12
Row Refresh Cycle Time(Trfc) =14
Row to Row Delay(Trrd) =3
Write Recovery Time(Twr) =3
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =2
Refresh Period (Tref) =3072
Write CAS Latency(Twcl) =1
DRAM Bank Interleave = Enable
Skew =Increase
Skew Value =128
DRAM Drive Strength =7
DRAM Data Drive Strength =2
DDRAM Response Time=Normal
Max Async Latency =9ns
Read Preamble Time =6ns
Idle Cycle Limit =256
Dynamic Counter =Disable
R/W Queue Bypass =16x
Bypass Max =7x
32 byte Granularity =Disable

[Haltech]

System
3800+ X2 CHBHE H20 Cathar Storm G4
300x10 1.62V
DFI NF4 SLI DR 6/23-3
ATI X800XL
2x512 OCZ PC 5000 DFI Special
Maxtor Dual 250's 16 meg cache / Maxtor 200 SATA
650W Silverstone PSU

Win XP Pro SP2

VID=1.4
VID SPECIAL=1.10
CHIPSET=1.6
LDT=1.3
DDR=2.7

CPC = 1T
CAS Latency(CL) =2.5
RAS to CAS(Trcd) =4
Min RAS# Active time(Tras) =7
Row Precharge Time(Trp) =4
Row Cycle Time(Trc) =16
Row Refresh Cycle Time(Trfc) =16
Row to Row Delay(Trrd) =3
Write Recovery Time(Twr) =3
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =2
Refresh Period (Tref) =3072
Write CAS Latency(Twcl) =1
DRAM Bank Interleave = Enable
Skew =Increase
Skew Value =128
DRAM Drive Strength =7
DRAM Data Drive Strength =2
DDRAM Response Time=Normal
Max Async Latency =9ns
Read Preamble Time =6ns
Idle Cycle Limit =256
Dynamic Counter =Disable
R/W Queue Bypass =16x
Bypass Max =7x
32 byte Granularity =Disable

[jinu117]

System
3800+ X2 vapo LS cooled (will find stepping shortly)
running 10x302 memory 180/200.

DFI NF4 SLI D 623-3
eVga 7800GTX water cooled.
2x Cruicial ballistix 1gb (2gb total)
74gig raptor, 160gb WD sata
600W Seasonic PSU (back up OCZ 600W) -> I find seasonic to have better characteristics and will be doing comparison review soon.

Win XP Pro SP2

VID= 1.5
VID SPECIAL= 113%
CHIPSET= 1.5
LDT= 1.3v
DDR= 2.8v

CPC = 1T
CAS Latency(CL) = 3
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 200mhz 15.6 micro s
Write CAS Latency(Twcl) = ?
DRAM Bank Interleave = Enabled
Skew = auto
Skew Value =
DRAM Drive Strength =
DRAM Data Drive Strength =
DDRAM Response Time=
Max Async Latency =
Read Preamble Time =
Idle Cycle Limit =
Dynamic Counter =
R/W Queue Bypass = ?
Bypass Max = 7x
32 byte Granularity = ?
__________________

[arctic-k20]

System
3800+ X2 CHBHE 0527 UPBW water cooled swiftec storm
HTT-280==2.8ghz @ 1.648v
DFI NF4 SLI-DR 704-2BT
BFG 6800GT PCI-E x2
2x512 OCZ-4200 Platinum TCC5 1:1
2x 200gig Seagate 7200.7 SATA
510w PCP&C SLI / Antec 480 for all pumps/fans

Win XP Pro SP2

VID= 1.55
VID SPECIAL= +110%
CHIPSET= 1.7
LDT= 1.5
VDDR=2.9 **edit** had to increase from 2.7 to get windows stable 1:1
LDT= 3x

CPC = 1T
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 200 MHz 3.9us (3072)
Write CAS Latency(Twcl) = 1clk
DRAM Bank Interleave = enabled
Skew = auto
Skew Value = 0
DRAM Drive Strength = 7
DRAM Data Drive Strength = 2
Max Async Latency = 9ns
DDRAM Response Time= normal
Read Preamble Time = 6.5ns
Idle Cycle Limit = 256clks
Dynamic Counter = disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = disabled (4 bursts)

[dnavarro]

Here's mine (so far, still working on 310x10...)

System
3800+ X2 0529XPMW Vapo LS
10x300 3.0ghz @ 1.52v
DFI NF4 Ultra D 704-2BT Bios
Evga 6800Ultra SLI
2x512 Gskill 4400LE @ 2.9V
2x 37gig Raptors RAID 0
PCP&C 510 SLI

Win XP Pro SP2

VID= 1.525
VID SPECIAL=
CHIPSET= 1.7
LDT= 1.4
LDT= 3x

CPC = 1T
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 19
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 200 MHz 15.6us
Write CAS Latency(Twcl) = 1clk
DRAM Bank Interleave = enabled
Skew = decrease
Skew Value = 0
DRAM Drive Strength = 8
DRAM Data Drive Strength = 3
DDRAM Response Time= normal
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 256clks
Dynamic Counter = disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = disabled (4 bursts)


D

[arctic-k20]

System
3800+ X2 CHBHE 0527 UPBW water cooled swiftec storm IHS removed
HTT-280x10==2.8ghz @ 1.520v (1.425 + 110%)
DFI NF4 SLI-DR 704-2BT
BFG 6800GT PCI-E x2
4x512 OCZ-4200 Platinum TCC5 9:10==255mhz
2x 200gig Seagate 7200.7 SATA
510w PCP&C SLI / Antec 480 for all pumps/fans

idle temp 30c
load temp 38c

Win XP Pro SP2

VID= 1.425
VID SPECIAL= +110%
CHIPSET= 1.6
LDT= 1.4
VDDR=2.8
LDT= 3x

CPC = 2T
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 166 MHz 1.95us (4708)
Write CAS Latency(Twcl) = 1clk
DRAM Bank Interleave = enabled
Skew = auto
Skew Value = 0
DRAM Drive Strength = 8
DRAM Data Drive Strength = 2
Max Async Latency = 9ns
DDRAM Response Time= fastest
Read Preamble Time = 7ns
Idle Cycle Limit = 256clks
Dynamic Counter = enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = disabled (4 bursts)

[dssconsumer]

System
4400+ X2 phase-change R290 made by me
274X11 3X 1.600V
DFI NF3 Ultra D 705 bios
ATi AIW radeon 9800
2x 512 G.skill PC4400LA
2x 74GB raptors raid 0
550W TTGI super flower PSU
12.3VX5.5V
Win XP x64 CR2

chipset=1.7V
memory=2.6V
video=1.6V

CPC = 1T
CAS Latency=2.5
trcd=3
tras=7
trp=3
twr=2
trrd=4
trfc=13
trc=11
twtr=2
trtw=2
tref=200
twcl=1
max.async latency=7
read preamble=5.5
dynamic cycle=256
ddr output drive=weak
Drive Strength=50%

[alpha0ne]

System--
ADA3800DAA5CD
3800+ X2 CCBWE 0528XPMW
10x250 2.5ghz @ 1.34v
DFI NF4 Ultra D 704-2BT Bios
Gigabyte X800
2x512 Gskill 3200F1 GH 1:1 @ 3.2Vdimm
2xHitachi 7K80 SATA II Raid 0 + 1xWD1600JB

OS--- XP Pr0 SP2

VID= 1.350
VID SPECIAL= 4%
CHIPSET= 1.6v
LDT= 1.4v
LDT= 3

Idle : 28~30c
Load : 38~40c

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 6
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 9
Row Refresh Cycle Time(Trfc) = 12
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3684
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = Auto
Skew Value =
DRAM Drive Strength = 8
DRAM Data Drive Strength = 1
DDRAM Response Time= Normal
Max Async Latency = 7
Read Preamble Time = 5.5
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16
Bypass Max = 7
32 byte Granularity = Disabled

No matter the settings or voltages or HTT (even @ 160) I cannot get two instances of Super P to work on both cores at the same time, but on either one at one at a time no worries

PRIME95 Ver2413 is fine, can prime all day (only tried up to 2600) UNLESS I try the Blend test, then its the same as with Super Pi

Does anyone know if this is a program fault ??? using dual core ??

ITS DOIN ME 'KIN HEAD IN

[njkid32]

Please as I stated in the first post ***If you have any questions please post a new thread**** Thank you!

[politenessman]

am i on the right thread? i thought this was post your stable x2 oc? anyway, heres mine on air

System---
3800+ x2 CCBWE 0529SPMW (E6) XP90/Medium Panaflo
htt=290==2900 @ 1.57v
DFI Ultra D 704-2 Bigtoe
EVGA 7800gt
2x512 OCZ4001024DCGE-K EL GOLD BH5 261MHZ 5/6 3.6V 2-2-8-2
2X37G Raptors Raid0
2x300G Maxline 3 raid0
powerstream 600

OS---Win XP Pro SP2

VID= 1.525
VID SPECIAL= 104%
CHIPSET= 1.5v
LDT= 1.3v
LDT= 3x

CPC = 1T
CAS Latency(CL) = 2.0
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 13
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 166Mhz 3.9us
Write CAS Latency(Twcl) = 1 clk
DRAM Bank Interleave = Disable
Skew = off
Skew Value = 0
DRAM Drive Strength = Weak
DRAM Data Drive Strength = Auto
DDRAM Response Time= Normal
Max Async Latency = 8ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16 clks
Dynamic Counter = Enable
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disable



very truly yours,
politenessman

[alpha0ne]

Heres a ss @ 2700 using SP2004 large FTT's with Super Pi 32M running at the same time

The reason CPU usage is not showing 100% for both cores is because I took the ss within a second just as Super Pi finished so I could show true temps readings



2800 coming sooooon