Inasmuch as in summer the temperatures are high I have put my PC in the freezer...for correctness I have beched with a ambient temperature of -6
config...
nf7-s
amd xp-m 2600
slk800+vantec tornado 92mm
ocz 520watt
Any photo...
In windows...
Any bench...
sorry for the low bus
and...suicide score...
And this is the validation..
http://valid.x86-secret.com/show_oc?id=34595
WoW,
good oc cpu and the vcore, isn't that a bit to high
that's not real xtreem air, (xtreem air is 300mm fan)
you just putted it in a fridge.
xyus
processor : amd s939 venice @ 2200mhz
memory : Corsair rev5.1 xms 2 *512
storage : 40 + 80 + 320gb
case : Antec SOHO server case plusview
Nice
How long did the air stay cold enough to bench?
Originally Posted by Xyus89
WoW,
good oc cpu and the vcore, isn't that a bit to high
that's not real xtreem air, (xtreem air is 300mm fan)
you just putted it in a fridge.
xyus
do you think it is more performing an ultra fan or a fridge-pc?
5 minutes..
LOL
*runs off to buy a bigger freezer*
nice one dude
It likes a PC Icecream :]
Nice job!
Nice, score, but the voltage is insane!!!
BTW, that's chilled air, not extreme air.
^^Now, I run extreme air
hehe someone actualy put PC into the freezer
Abit IC7 P4 2.8a @4.21 | P4 3.4e @4.9 | Gainward 6800GT GS @486/1386
Asus P4P800 SE Dothan 730-PM @ 2900 | EVGA 6800 Ultra GS @521/1376
e8400@4.3G & 8800GTS G92 800/1932/1132 as gaming rig 24/7
Custom self build chillbox with watercooling @-28c 24/7 | chilled wc " cpu -18c idle/-3c load
3DMark 2005 Score Dothan & 6800U
3DMark 2005 Score p4 & 6800GT
that's a nice clock on 1.9v. how high did you go with ordinairy aircooling ??
mine did 2.75 GHz. on 1.95v spi 1M stable, but the temps werre about 40-45 degrees, so I don't really know if the cpu of the temps are holding me back
I could do 2.8 suicide, but my cvf-file was corrupt and I couldn't upload it.
here's one at 2.783 GHz.
also my board died a few days ago, so I have to search for another board to start overclocking my mobile again
what bios do u use?
and what memory?
i'd like to know...
i use d27 taipan by merlin 1T and if i set the vcore to 1.85V or higher i can't use fsb's higher than 235 or so..
if vcore is 1.825 or lower, i can get 264 stable fsb...
Rig 1:
Abit NF7 v2.0 (L12 mod, VDD mod, VDIMM mod, VDrop mod, BIOS mod) /dead AGP slot / dead VDimm Mosfet
Tbred B 1700+ @ 231x6.5 = 1500MHz - 1.3V daily
2x256MB Kingston HyperX OldSchool BH-5 1:1 2-2-2-11
Rig 2:
DFI Lanparty UT NF3 250Gb
Turion MT-30 (1600MHz) @ 2700MHz - 1.375V daily under Thermaltake Sonic Tower
Palit 7600GS DDR3 [400/1000] @ [7xx/1720 - Benching Clocks] / [600/1600 daily] - Stock cooling
2x512MB GeiL Ultra-X BH-UTT
exactly the same i thoughtNice
How long did the air stay cold enough to bench?
infos, plz =)
1. Asus P5Q-E / Intel Core 2 Quad Q9550 @~3612 MHz (8,5x425) / 2x2GB OCZ Platinum XTC (PC2-8000U, CL5) / EVGA GeForce GTX 570 / Crucial M4 128GB, WD Caviar Blue 640GB, WD Caviar SE16 320GB, WD Caviar SE 160GB / be quiet! Dark Power Pro P7 550W / Thermaltake Tsunami VA3000BWA / LG L227WT / Teufel Concept E Magnum 5.1 // SysProfile
2. Asus A8N-SLI / AMD Athlon 64 4000+ @~2640 MHz (12x220) / 1024 MB Corsair CMX TwinX 3200C2, 2.5-3-3-6 1T / Club3D GeForce 7800GT @463/1120 MHz / Crucial M4 64GB, Hitachi Deskstar 40GB / be quiet! Blackline P5 470W
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
Barton RULEZ!
I have not seen 3.1GHz with air!
My mobile on 1,925(real 1,888)is stable sp 1m@2753mhz with temps about 50°...that's a nice clock on 1.9v. how high did you go with ordinairy aircooling ??
mine did 2.75 GHz. on 1.95v spi 1M stable, but the temps werre about 40-45 degrees, so I don't really know if the cpu of the temps are holding me back
I could do 2.8 suicide, but my cvf-file was corrupt and I couldn't upload it.
here's one at 2.783 GHz.
also my board died a few days ago, so I have to search for another board to start overclocking my mobile again
The bios is d26 mantarays xt...ram a-data 3200 bh-5@3,73volt
-20° is the temp more cold...
the temperature increased of 1,5 °C per minute
Infact this is wr air cooledBarton RULEZ!
I have not seen 3.1GHz with air!
i couldn't go higher than 245 with d26 balck mantarays XT
with d27 taipan by merlin i can get 264 fsb 1T prime stable
the thing is.. that i got only 245 on 2 different boards.... which could go higher with the other bios..
how is this possible?
Last edited by V0rt3x; 09-01-2005 at 01:55 AM.
Rig 1:
Abit NF7 v2.0 (L12 mod, VDD mod, VDIMM mod, VDrop mod, BIOS mod) /dead AGP slot / dead VDimm Mosfet
Tbred B 1700+ @ 231x6.5 = 1500MHz - 1.3V daily
2x256MB Kingston HyperX OldSchool BH-5 1:1 2-2-2-11
Rig 2:
DFI Lanparty UT NF3 250Gb
Turion MT-30 (1600MHz) @ 2700MHz - 1.375V daily under Thermaltake Sonic Tower
Palit 7600GS DDR3 [400/1000] @ [7xx/1720 - Benching Clocks] / [600/1600 daily] - Stock cooling
2x512MB GeiL Ultra-X BH-UTT
Yes...is possible...i couldn't go higher than 245 with d26 balck mantarays XT
with d27 taipan by merlin i can get 264 fsb 1T prime stable
the thing is.. that i got only 245 on 2 different boards.... which could go higher with the other bios..
how is this possible?
What PSU do you have?
so you did gain a lot with overclocking subzeroMy mobile on 1,925(real 1,888)is stable sp 1m@2753mhz with temps about 50°...
The bios is d26 mantarays xt...ram a-data 3200 bh-5@3,73volt
-20° is the temp more cold...
the temperature increased of 1,5 °C per minute
Where courage, motivation and ignorance meet, a persistent idiot awakens.
i have a kme ph500 active PFC.
anyway, the thing is that i've reached the EXACT same fsb with the same bios...
with taipan however, i got 264 on one and 268 on the other...
why were they limited?
i must also say that i have the same psu with this bios also
Rig 1:
Abit NF7 v2.0 (L12 mod, VDD mod, VDIMM mod, VDrop mod, BIOS mod) /dead AGP slot / dead VDimm Mosfet
Tbred B 1700+ @ 231x6.5 = 1500MHz - 1.3V daily
2x256MB Kingston HyperX OldSchool BH-5 1:1 2-2-2-11
Rig 2:
DFI Lanparty UT NF3 250Gb
Turion MT-30 (1600MHz) @ 2700MHz - 1.375V daily under Thermaltake Sonic Tower
Palit 7600GS DDR3 [400/1000] @ [7xx/1720 - Benching Clocks] / [600/1600 daily] - Stock cooling
2x512MB GeiL Ultra-X BH-UTT
Posting Permissions
Reply With Quote
Bookmarks