X2 24/7 Stable Overclock Settings

[njkid32]

This is a great thread and has been edited at the starters request to remove useless off topic posts inside of it so everyone can get right to the data. If you have questions about a post, PM the author Ugly n Grey

Ok lately I have been getting several requests for good 24/7 settings for my X2. I think if we start a thread so people can post their 24/7 stable settings it may help others that are just starting out on their X2. So please post your 24/7 stable settings. This thread is here to help not to impress so please dont turn this into competition and a Q and A thread just settings please.... SS's are welcome as well..

*********Please if you have any questions post a new thread this is for settings only********* Thank you!!

Here is a blank text to make it easier.
Also
Here is what it should look like:

System
3800+ X2 CHBHE 0526UPBW air cooled W/Big Typhoon
HTT-295==2.95ghz @ 1.55v
DFI NF4 Ultra D 510-2fixed bios
Evga 6600GT PCI-E
2x512 OCZ-OCZ4001024ELDCPE-K 246MHz w/166 divider
2x 37gig Raptors
485w Enermax PSU

Win XP Pro SP2

VID=
VID SPECIAL= +113%
CHIPSET= 1.6
LDT= 1.3
LDT= 3x

CPC = 1T
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 166 MHz 7.8us (1168)
Write CAS Latency(Twcl) = 1clk
DRAM Bank Interleave = enabled
Skew = decrease
Skew Value = 0
DRAM Drive Strength = 8
DRAM Data Drive Strength = 3
DDRAM Response Time= normal
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 16clks
Dynamic Counter = enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = disabled (4 bursts)