Oskar asked me to unhide a few extra ram options in the upclock section. Some may work and some may not so try at your own risk. I am testing so i know the bios loads ok.
Also I removed all the CAS settings that don't work, 1.5, 2 , 2.5 and 3 are still there but the others are gone.
Thats about it, no table tweaks etc and its only available on the -2 at this time.one last thing is i had Oskar remove the added 0.1vdimm thats applied when you set TRCD to 2, so now the Vdimm you set in bios is real close to the vdimm the board actually sets.
Grab it here
Reply With Quote
Bookmarks