1st DI run - photo-story - Socket A action :-)

[piotres]

Hello

Some weeks ago I have made my first DI run . That wasn't even only my first run, but there has been second official (I mean posted on forums) Dry-Ice benching in Poland .
I had 1700+ JIUHB, ABIT NF7, 2x256 MB BH-6 and Codegen 400W PFC PSU .



I made my container of 50 cm lenght, 54 mm (2') cooper tube and cooper plate - 60x80x10 mm .



I have drilled some holes in baseplate with 8mm diameter bit.



Brazing . I used bronze sticks and Acetylene-oxy torch .



Container after cleaning.



Isulation was done, with neoprene - 9mm thick .



My rig . I was benching in a big hall .



I picked a ice cube out from the box, which I prepared in home...normal box with styrofoam .



Breaking the block .





Pouring the ice and then acetone "pimp: .



I have thermomether for only -50*C ...so the scale ended fast, and then never went onto mensuration scope .





OK...let's do some overclocking .. ...



Ohh yeah I like my old 1700+ ...1466Mhz@ 3006 Mhz so 105 % o/c .







Some SPI and Sandra 2003 screens @3006-3018 Mhz/2.20V .
Also new record SPI 16M in Poland on Socket A .. .



Max suicide screen - 3214 mhz so 119% o/c ... not bad
My mobo was geting crazy with that vcore..I think it was too cold ...real vcore was still 2.20 V .



The lowest temperature I could seen on the measure soft ..



OK it's time to end this crazy play...



Some frost on mounting bolts .



End of the party ..



Baking the NF7 ...ohh it was delicious .

THE END

For next few weeks I plan next Socket A/Dry-Ice action ... this time on my friend's Barton 2500 +

Best Regards
Peter