ASUS K8N-E [vmod] Vdimm/VLDT

[mouzel]

I read some of you waiting for this so I decided to post my findings.
Start out with a 22k resistor or a 50k pot at the max. setting when doing the Vmods

Vdimm mod
Remember to set the Vdimm setting to max. in the bios before doing the mod
Connect a resistor between pin 13 and 11 from the LM324 chip.





Vldt & Vnf3
I am not 100% sure about these two but they do work. 1.2V standard for LDT and 1.6V standard for the NF3 chip ?
Maybe someone can comment on these voltages.
Just connect pin 13 and/or pin 9 of the LM324 chip through a resistor to ground .



[ sorry for the rather large images ]