**[OFFICIAL]** GIGABYTE Z77X Owners Club/Discussion/Info (All Model's Welcome)

[cab]

Somehow your BCLK running in "Fail-Save Defaults" so try clear CMOS, press F7 and load "Optimized Defaults" + F10 "Save & Exit".

My Fail-Save Default => BCLK same as your:



Edit:
If above didn't solve your BCLK value,
try to replace CPU and check if any socket pin bent.

Thank you, I reset CMOS using the mobo switch but BCLK is still 99.79. The hardware is very stable in Windows & Linux, it doesn't hang or BSOD, and it can run prime95 forever @4.0 GHz with stock voltage. Like I posted above, if I set BCLK to 100.01 the numbers look ok but the PCI-E card in the last slot is no longer detected, maybe NO cards would work! Any other ideas what caused this?