Can some browse my voltages and check nothing is out of wack.

I can run Prime 95 blend for 9 hrs.. annoying I know. I was using 0.03vcore offset, mimimum LCC (5), 250/250/250 - all else on auto. Bios 1.6 (this is a b3 board).

After prime blend 'failure' upped vcore offset to 0.035 and ran IBT (AVX) maximum free RAM for 20 passes:-

Vcore at load peaks at 1.328 then settles at 1.304.

I know I'll probably end up using vcore fixed. But as this is my main pc and a 24/7 clock it would be really nice to get her stable without an aggressive LLC and fixed high'ish vcore through the chip.

I've notice some are setting fixed values for CPU PPL & VTT - but I have them on auto. I am running Gskill ripjaws at stock 2x2GB 1600Mhz CL9 @1.5v.