Quote Originally Posted by skuldarin View Post
i listed it already on my OP. G.Skill G.Skill F3-12800CL7D-4GBECO in 12gb (6 stick) setup. i KNOW this memory will do 2000mhz like this being it's been done but it just wont do it for me. soon here i might end up just giving in a buying 12gb worth of kingston HyperX 2000's being they list in the manual as capable of running @ 2000mhz with 6 stick setup CL9 stock... i just don't feel i should have to do that knowing that the G.skill sticks i have should be able to do what i'm asking from them... and i know it's not a bad stick either i've tested every one of them... all are good to go in any slot on the board.
For starters set
UCLK to 3600ish not auto
Set QPI to lowest mhz (not auto or slow mode)
Try more ram voltage 1.74?
Try higher Trfc like 82
Try looseing RTL like 65 or so
Try Extreme OC mode 1 (supposed to help ram and uncore)
Can try lower cpu pll to 1.6's
Try bumping up ich voltage to 1.25 or so

I wouldnt run 1.6vtt, I dont dare go that high on ln2