Quote Originally Posted by BieBiep View Post
LoL!

just because you have to input most settings manually, where the Giga automagically disables/enables some things (which you might even want, like power saving functions!). Doesn't mean this board is a headache!

You just have to actually KNOW what the hell you're doing before you do something like enable/disable C1E or try to lock the multi to 21



Noticed something strange about PWM temps btw:
Sometimes the more stable your CPU is at a certain frequency, the lower your PWM temps are.
I was running LinX yesterday and choosing a LOWER voltage actually meant HIGHER pwm temps.

I'm supposing that this is due to the processor asking for more, and the PWM trying to keep up... or it might be that some voltage settings are just a tad "harder" to pull of than others.
It seems that my board particularly likes 1.344v or 1.360v since sometimes it just keeps drooping to those 2 volts, even though i selected 2 settings higher than the last time it drooped to 1.36.
I know, hah! This board is a great board but lets be honest, it can be pretty frustrating getting the right settings the board likes. Because all boards like different voltages/settings, the T3EH8 can be a bit of a pain at times. Overall though, its a great board as long as you can be patient and utilize the features it has. I still can't get anything above 4.0 to be 100% stable but I know its possible, just haven't had enough tinkering time. I've stuck to 3.6 HT @ 1.16v for 24/7 use and 4.2-4.3GHz HT @ 1.3+v for suicide runs. I like my memory speeds at 3.6 :P