Gigabyte EX58-UD5/Extreme Discussion Thread

[Sparda]

I don't have a Vcore 1.37 so will the nearest of 1.36875V be ok?
its pretty close ain't it? Other wise its 1.375V
For QPI/VTT I don't have a 1.42 I have a 1.415V and a 1.435V

But I don't want to go and blow up this ... lol.... so I wanted to be sure what to go with here so I can start the testing.

Thanks

You are fine because there a chip using odd number like 1.315v and others using even number 1.32v. Nothing special.
Have you tried test your qpi/vtt using prime95(blend) like I said before. >1.4v is too much for 3200 uncore.
I assume your vdimm & vcore is enough and RAM timing is correct ; lower the qpi/vtt down until it will fail in the first bunch 1024k of the prime95(blend) and increase it step by step until it will pass the first bunch 1024k of the prime95(blend).
Then increase it a notch or two for the final qpi/vtt. After that you can start meddle with other settings like vcore , etc.