ASUS Maximus II Formula - new P45 king?

[andressergio]

andressergio,

I am a bit confused.
I see on your last pic, that you are using this settings:

CPU GTL's: 10 -35 10 -35
NB GTL: +30
vFSB: 1.37825
vSB1.1 - 1.20600
vSB1.5 - 1.55300

But I don't get if you are better with them or not. Is your overclock more stable with them? Are you passing stress tests that you couldn't before, with this settings? Or are they worst that your previously settings?

I look at your pic (before you change your settings to this lastest one), and you too, were passing the same IBT test... So no improvements? Here are both pics I have from you.
My conclusion is that you didn't improve... You got the same result, with different settings..

[]'s
Simps

Sorry mate if i confused you...

Yes i passed IBT with a 2850Mb problem size custom test but an hour later gave my BSOD instant when i tried to re run it, tested today and again wont' pass...So i decided to try most of your settings for 500FSB and passed again, in a few hours will try again to see if it keeps going strong and also test using x9 multi

You uderstood now ?

************************************************** ********
my first settings where (first pic)
passed IBT yesterday and today BSOD in seconds...

4105 (483x8,5)
2x2GB Gskill 1200 PL10 Moderate vdimm 2,1

CPU Skew: Delay 200
NB Skew: Delay 100
DRAM Skews: Delay 50
CPU GTL's: +10 -35 +10 -35
NB GTL: +40
CHA / CHB Reference: Auto
NB DDR Reference: Auto
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM OC CHARGER: Enabled
PULLINS: Disabled
PCI-E Frequency: 100
vPLL: 1.55
vFSB: 1.35
vNB: 1.45775
vSB1.5: 1.5
vSB1.1: 1.1
CPU Configuration: All disabled
Load line calibration: Enabled
CPU and PCI-E Spread Spectrum: Disbaled
vcore set 1,35 idle 1,336

************************************************** ********

my new settings (second pic)
will try with this one later to see if it's still strong

4105 (483x8,5)
2x2GB Gskill 1200 PL8 Moderate vdimm 2,1

CPU Skew: Delay 200
NB Skew: Delay 100
DRAM Skews: Delay 50
CPU GTL's: +10 -35 +10 -35
NB GTL: +30
CHA / CHB Reference: +12.5
NB DDR Reference: -25
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM OC CHARGER: Enabled
PULLINS: Disabled
PCI-E Frequency: 100
vPLL: 1.55
vFSB: 1.37825
vNB: 1.45775
vSB1.5: 1.55300
vSB1.1: 1.20600
CPU Configuration: All disabled
Load line calibration: Enabled
CPU and PCI-E Spread Spectrum: Disbaled
vcore set 1,35 idle 1,336

************************************************** ********